Why cant I drag and drop my pictures into an order I want to display them

Why can't I drag and drop my pictures into an order that I want to display them ? The 'manual sort' option does not seem to be 'lit' nor does the 'reset manual sort' what am I doing wrong please.
ps
Beginning to wish I had stuck with a PC !

If you prefer a PC use it. No one here cares one bit
As to iPhoto, unless you take a few minutes to actually learn how to use it then you will never be happy. Same with any new PC program that you do not understand. Or a new car for that matter
A great place to start your education is here. http://www.apple.com/support/iphoto/
As to your specific issue, trivial. Make an album of the photos and manually drag them to the order you want. Events simply do not work that way
Try to drive your car in Park and you get nowhere because that is not how it works. Any time you use a product incorrectly you will have poor results
LN

Similar Messages

  • Why cant i drag and drop mp3 files into my itunes library in itunes 11.1.1?

    I recently lost a hard drive with most of my music on it. i removed and reinstalled itunes and set it to work on my other hard drive. i was able to drag and drop mp3 files that i had and put them into my library. After the latest updates, now it only gives my the cirlcle with the slash though it when i try, not sure what changed

    did you manage to fix your problem.
    i tunes 6 used to be great for me but i upgraded to 7 which wiped my i tunes and ipod. im back to ver 6 now but i cant drag files from my c drive to any playlists

  • Why cant I drag and drop into playlists

    I used to be able to drop and drag inrto playlists. Now I get a message which says press + button to add, but there seems no way of doing it. I'm using windows 7

    Apple Support Communities updatesI’ve tried the control-I route and then tried to locate the file without success. What I get as a file location starts with //localhost/C:/Users. It may also be useful to know that most/all the missing files seem to have been copied from CDs. I can’t be sure if it’s all because the whole music file has nearly 9000 entries! The ones that still seem to work were copied from an external hard drive.
    From: Apple Support Communities Updates
    Sent: Wednesday, April 01, 2015 7:30 PM
    To: couffin
    Subject: - why cant I drag and drop into playlists
                                                                                    You received a reply 
                                    turingtest2 has replied to your question. You can view the full discussion in Apple Support Communities.                                                                                
    why cant I drag and drop into playlists 
                                    The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. (In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows if this might apply.)
                                    Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
                                    In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links. Although it says something like "use the same location" it expects to find the tracks in the same artist & album layout that it generates, not all in one big folder.
                                    If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
                                    tt2
                                                                                    Correct Answer Helpful Answer 
                                  Use the buttons above to tell turingtest2 and the rest of the community if this reply solved your question or helped you get closer to finding a solution. 
                                  To reply to turingtest2, go to the discussion in Apple Support Communities. 
                                  You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile. 
                                  TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014. 
                                  All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • Why cant i drag and drop movies into itunes?

    why cant i drag and drop movies into itunes?

    To make it display on the desktop, Finder > Preferences > General tab > check external disks.
    The drive might be formatted NTFS for Windows which is treated as read-only on the Mac.  Need to reformat it using disk utility.

  • How to drag and drop a picture at run time in a window displaying pictures?

    How to drag and drop a picture at run time in a window displaying pictures on the front panel. The main thing is that the window is displaying frames continuously?

    vivman,
    So from your description you have a picture control where you've already created an image and you'd like to drag an image around inside of the picture control. This can be done although it is going to take a significant amount of research and programming on your behalf. You can use the drag event in the event handler to find out when the drag occurs and where the cursor is. Then edit the picture as you move your mouse so that when you drop the picture gets updated.
    The even structure is a somewhat advanced topic and the drag and drop feature is one of the more advanced uses of this structure. I would search the example finder (help>>find examples) for "event" and "drag" to see how to use these events. Also you'll want to look at the examples for the picture control.
    Sounds like a cool project! Check out Darren's Weekly Nugget 10/30/2006 this topic (http://forums.ni.com/ni/board/message?board.id=170&message.id=212920). It might prove useful.
    Good luck!
    Chris C
    Chris Cilino
    National Instruments
    LabVIEW Product Marketing Manager
    Certified LabVIEW Architect

  • Why cant i drag and drop into my external

    I am trying to understand why my external devices dont pop up on my desktop, and i cant drag and drop files into my external HD, how do i put a file into an external device?

    To make it display on the desktop, Finder > Preferences > General tab > check external disks.
    The drive might be formatted NTFS for Windows which is treated as read-only on the Mac.  Need to reformat it using disk utility.

  • Why Cant I Drag And Drop Music And Movies to My iPOD?

    Why does Apple make this so hard? I dont want to sync, everytime I do I lose everything and I dont like keeping a separate folder with my tunes I like to listen to all the time and then I dont have the time to go through 50 gig of music to uncheck or check what I want on my ipod.... Why cant I just drag and drop to my Ipod? Why do I need itunes is there another way to get music and videos on my ipod other than itunes?

    Also, I cant just look up what my ipod has on it all ready to delete some videos or music. It wants to sync up with my hard drive then it deletes everything.
    Sorry but I am way confused on this. I was really used to my basic MP3 player where I have folders on my drive that I just drag and drop/delete as easy as that.

  • Why cant i drag and drop music

    i have been trying to add music to my library by drag and drop system, but it does not work. only way i can add any more music is by doing a full system search. can anyone help plz

    Also, I cant just look up what my ipod has on it all ready to delete some videos or music. It wants to sync up with my hard drive then it deletes everything.
    Sorry but I am way confused on this. I was really used to my basic MP3 player where I have folders on my drive that I just drag and drop/delete as easy as that.

  • Why cant i drag and drop from itunes library to iphone 3gs

    I have had numerous problems with iphone 3gs so I reset it to factory settings but now I can't drag and drop my music from itunes library to iphone.  I have checked the box to manage music manually but still no joy, any suggestions pls?

    Because you do not have manually manage music selected?

  • Why cant i drag and drop music from my itunes to iphone 5?

    Hello,
    I can drag and drop to my ipad but not my iphone 5? Help, please. Its seems as though I did it when I first got my phone and now
    no can do.

    Because you do not have manually manage music selected?

  • Why cant i drag and drop on my macbook pro

    all of a sudden i cannot drag and drop files...does anyone know how i can fix this issue? thanks in advance

    Well, usually when my mac starts to have strange problems, I usually reset NVRAM (About NVRAM and PRAM) and SMC (Intel-based Macs: Resetting the System Management Controller (SMC)). I'm not a specialist but it always work. And a pic helps me better (http://www.chikaboo-designs.com/mac-fan/).
    I had the same problem too and after both resetting, all works fines.
    I hope it works

  • Why can I drag and drop a file into A3, but not import it?

    With A2+ I've scanned images (Epson flatbed) and imported them as TIFF, JPG, PNG, whatever.
    Same scanner, software, and A3 refuses to import any of the above formats. However, I can drag and drop the image on a project and it works.
    Any ideas? I looked for relevant threads but didn't see any immediately.
    Thanks

    Image appears in import pane; I can assign metadata, click "import," wait about 10 seconds and it says "import completed with errors," though the file doesn't show up in project.
    I have to say it's inconsistent. I just spend 20 minutes trying to import a one scan in PNG, TIF, JPG formats, and eventually gave up and dragged it in as TIF.
    Just now, I tried importing it into a different A3 project, and the TIF worked. However the PNG (which I didn't drag into A3, still gives the above error.
    I can live with this as long as drag and drop works, but seems like a bug.

  • How to drag and drop a picture into a mask?

    I have a text box which has a masked photo in it. I used to be able to click on a picture in my web browser, drag it over to iWeb, and drop it into the mask with one quick and easy motion.
    I made some changes to my web site and now I can not do this anymore. I have to drag the picture in, cut it, double click the masked photo, and paste it into the mask. I do this frequently so being able to quickly throw in a new picture is very convenient. I'm not sure what small thing I've changed. Any ideas?

    I used to be able to click on a picture in my web browser, drag it over to iWeb, and drop it into the mask with one quick and easy motion.
    The method you describe sounds like you're stealing images from other websites... please say this isn't the case.

  • Why cant you drag and drop files into illustrator anymore?

    i dislike the change.
    Regards

    Please see this post.
    Illustrator CC 2014 October Update | Creative Cloud Libraries not Working
    one user reports yosemite fixing this, and post #23 might be worth trying as this helped #27.

  • Why cant I drag and drop photos onto my iPhone in iPhoto?

    I just want to put some photos on my iPhone!

    The iPhone does not support disk mode.
    If you use iPhoto on your Mac for photo storage and management, you can create an iPhoto album or albums for selected photos that you want transferred to your iPhone. Under the Photos tab for your iPhone sync preferences, select sync photos from iPhoto. Choose selected albums and select the iPhoto albums in the window below followed by a sync. The named iPhoto albums will be transferred to your iPhone with the order of the photos in the iPhoto albums retained.
    If you want to remove an album of photos, deselect the album under the Photos tab for your iPhone sync preferences followed by a sync. To remove select photos, remove the photos from the iPhoto album in iPhoto that you've selected to be transferred to your iPhone under the Photos tab for your iPhone sync preferences followed by a sync.
    To add additional photos to your iPhone, add the photos to an iPhoto album in iPhoto that you've selected to be transferred to your iPhone under the Photos tab for your iPhone sync preferences followed by a sync, or create a new iPhoto album for the photos, select the new album under the Photos tab for your iPhone sync preferences followed by a sync.
    Photos transferred to your iPhone via the iTunes sync/transfer process are optimized for viewing on your iPhone as part of the iTunes sync process.

Maybe you are looking for