Why come up the "service not responding " message during operation

Dear all
I have some critical issue about servie not respondig message occurred during the N7K operation
N7K_XXX# conf t
Enter configuration commands, one per line. End with CNTL/Z.
N7K_XXX(config)# ip access-list nh
Service not responding
N7K_XXX(config)#
N7K_XXX(config)# end
that happen take about 15 minute however running show command normal and system also turnning the normal mode after 15minute.
anybody know about kind like happen,or any solution or why come up that message
please help out for me
thanks.

Hi evan191,
Thanks for using Apple Support Communities. This article has some steps you can try if your messages aren't sending as iMessages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Cheers,
- Ari

Similar Messages

TS1363 When ipod starts to sync, the "program not responding" message comes on and shuts down itunes. Why?

When ipod starts to sync, the "program not responding" message comes on and shuts down itunes. Why?

Did you already try to delete the photo cache? iTunes: Understanding the iPod Photo Cache folder

Cp8 - why do I frequently get "Not Responding" message?

When I copy slides from one project to another, or if I try to apply a different theme I will get the "Not Responding" message. It happens with other functions as well but these are the most frequent issues. I have had versions 4,5,6,7, and now 8. I never had this before.

Firefox is already running but is not responding
* https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
Firefox Hang at Exit
* https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
Check and tell if its working.

In App Purchase showing "Service Not available" Message box with error code 805a01f4

Hi all ,
I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
in a bit . This error code may be helpful : 805a01f4 ."
Please tell me how to resolve .
Thank you

Thanks for your response .
I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After few seconds got a message on my number that "Dear customer,
thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ?

Getting "Not responding" message and bridge freezes

When launching Bridge CC on a PC with Windows 7 it gives a "not responding " message in the title bar. If left alone it will eventually open, but is incredibly slow to go to another folder, gets hung up and gives the same "not responding" message.
It opens to the same folder every time, even if left off at another folder.
I have uninstalled Bridge CC and reinstalled and still get the exact same problem. Also have done registry cleanup and other PC maintenance.
Does anyone know of a solution?

Perhaps someone close (geographically) can give you a hand?
[http://windows.microsoft.com/en-ca/windows/view-cpu-utilization-performance-information#1TC=windows-7 This Windows Help article] explains how to check for resource use on your PC.
What I described is a one-step test in Thunderbird: ''On the Help menu, click on "Restart with Add-ons Disabled". '' This would help determine if the problem is among an add-on installed in Thunderbird.
If that doesn't show improvement, the problem is not within Thunderbird but elsewhere in the system. Starting the computer in Safe Mode then helps confirm if the problem is in Windows (and not specifically in Thunderbird).
I understand you may not be comfortable doing this by yourself, perhaps ask someone close to help you in person, by showing them our answers here.

AV iChat ---does not respond message

I've been reading about iChat problems and see a lot of frustrated people out there and have joined the ranks.
My mother and I successfully AV iChatted Friday night.
My daughter and I AV iChatted Sunday (she could invite me, i couldn't invite her)
My daughter was able to AV iChat with her grandmother Sunday too. But I could not. We could however audio chat.
A week later I cannot audio OR video chat with my mother.
We are getting the "(fill in name of invitor) did not respond" message.
I have opened the ports in my Mac Firewall, and my mother did too--no luck.
I tried to set a static ip address for my computer but cannot because my isp has dynamic DNS and I'm not allowed to according to them.
Am I frustrated? You bet!
I've Mac OS X (10.4.5) on dual processor intel iMac. I connect to the web via Motorola Surfboard S84220 Cable Modem and Netgear 54 Mbps wireless router WGR614v6. My mother is on System: Mac OSX version 10.4.5
Power Book G4 and is connected thru Surfboard Motorola Model SB 5100.
Oh--should I say, I am on .Mac and my mother is AIM?
My husband is beginning to worry about me because I have been glued to my computer--he says there are programs out there to help people like me get over my addiction--i hope so.
iMac dual intel Mac OS X (10.4.5) Motorola Surfboard S84220 Cable Modem and Netgear 54 Mbps wireless router WGR614v6
iMac dual intel Mac OS X (10.4.5) Motorola Surfboard S84220 Cable Modem and Netgear 54 Mbps wireless router WGR614v6
iMac dual intel Mac OS X (10.4.5) Motorola Surfboard S84220 Cable Modem and Netgear 54 Mbps wireless router WGR614v6

Well thanks for your time and input. After playing around with everything for another while, I finally called Apple Care. I figured since I payed for it, I should use it.
They first suggested that my problem lay with the strength of my internet connection. I turned my airport off and hooked up to the internet directly with the cable. When that did not help, we tried one more thing.
It turns out that I had to reset my modem. I unplugged it for 2 minutes--including its cable connection, and then turned everything back on as well as restarting my computer. Voila! it worked.
I have since reconnected my airport and am now operating wirelessly, and iChat is happy again.
Since I am not a technical person, i am probably going to garble this, but it seems that the modem was issuing crumby ip addresses to my computer (?)
Maybe you can make sense of this.
After all of this, it seems like such a simple fix. Maybe you who are experiencing the "did not respond" message can start here before you go to too much trouble setting ports and such.
We'll see if this still works tomorrow.
Good luck!

I have the latest update. Why does my reader still hang up and give me the "Not responding" message. I'm on Windows Vista.

This is a most frustrating situation. Constantly getting the "not responding" message and any further click of the mouse, and adobe reader goes pale and I have to "end process." What's the deal? This use to be a very reliable program. Now, it's nothing but frustrating and bothersome.

I had the 10.1.10 version and have updated it to the 10.1.11 version. I
restarted my computer. Same old problem. Adobe Reader hangs up anytime I
try to move a document to the second page, for example. Is there an older
version I can go back to to avoid this problem. I'm seeking to view two
documents--both from Windows Publisher saved as pdf files. No luck
Bob
On Tue, Aug 12, 2014 at 10:19 AM, ~graffiti <[email protected]>

Mozilla hangs (not responding)message. I have loaded the latest version and still have the same problem, why?

Firefox hangs (not Responding message) I tried refreshing Firefox. I tried deleting history. I deleted Firefox and reinstalled the latest version which I already had running before and the same problem occurs. It starts hanging after a few minute when I start the computer mostly on my email page or ebay page and continues to hang for about 5 to 10 minutes then it starts to function normally. It is most annoying and I cannot figure what is causing the problem? Please help if you can?
Thank you,
aleggert

Hello Fred McD,
If I was unclear I am sorry, I can not start Firefox normally after starting the computer in safe mode with or without the network because my USB internet modem will not allow me access to the internet in the safe mode. the USB modem will not work when the computer is in safe mode. The only thing I can do is start the computer normally then enter Firefox in the safe mode by holding down the shift key and pressing the icon for Foxfire at the same time. This will put Foxfire in the safe mode but the computer is operating in the normal mode Because I can not get access to the internet when I use the computer in the safe mode The USB modem will not connect to the internet when the computer is in the safe mode.
Thank you,
aleggert

"not responding" message across the top of mozilla several times a day and my entire computer lags when I receive that message.

about two to three weeks ago mozilla started to lag on occasion with the "not responding" message across the top of the browser. it would freeze while i was playing facebook games or while i was watching youtube videos or just trying to scroll down a page, so i used my laptop less and less hoping the rest period would help stop it from lagging and from not responding. now that i have uninstalled useless programs and freed up hard drive space it is still lagging a lot. i even updated to 9.01 and updated the plug-ins that i use and it still lags.

Have you recently upgraded is so i suggest you run it in safe mode first.
Below is an example
[[Safe Mode]]
and make sure ya plugins aint out of date
[https://support.mozilla.com/en-US/kb/Safe Mode Plugin Checker]

After my windows 7 computer did automatic updates, everytime I click on a link I get a not responding message and have to wait almost a minute for the program to continue.

Last night, my computer running Windows 7 premium home edition downloaded some automatic updates. I came in this morning to find that it had done a restart after adding these updates.
Now, anytime I click a link or do something which requires a redirect to another web page, my program gives me the not responding message and I have to wait 30-55 seconds for the program to continue.
I have Firefox 4 and it was running smoothly up until this morning, so I can only assume that whatever the automatic updates were, there is something in them that is causing this error. I do not know what updates were installed.

I don't have that problem in Firefox 29 when I read Gmail or AOL (aim''.''com) webmail. When I click on a webpage link in an email I'm reading (example: http://www.tworivertheater.org/ ) the link opens in a separate Firefox tab.
Are you saying this doesn't happen in outlook''.''com webmail and the link opens in the same Firefox tab as the email itself? I don't use outlook''.''com webmail myself. Hopefully someone will be along who does, or see [[Problems with email and how to find help]].
It might help if you would confirm the type of link that is opening in the same tab as the email you are reading in your outlook webmail. If I misunderstood your problem, please explain it better.
It might also help if you could furhish more troubleshooting information. Please do the following:
*'''For Firefox 29.0 and above''': Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].

TB keeps getting Not Responding message. Screen freezes. Happens all the time. I am running STOPzilla anti-virus

I get the Not Responding message on both TB and Firefox all the time. I have seen issues using McAfee and a list of other Anti-Virus programs but I use STOPzilla and it is not listed at this time. It gets very annoying when typing something and the screen freezes for several seconds and have the Not Responding message and then it will work again. I am running TB 31.0 and Windows 7. Thank you.

Perhaps someone close (geographically) can give you a hand?
[http://windows.microsoft.com/en-ca/windows/view-cpu-utilization-performance-information#1TC=windows-7 This Windows Help article] explains how to check for resource use on your PC.
What I described is a one-step test in Thunderbird: ''On the Help menu, click on "Restart with Add-ons Disabled". '' This would help determine if the problem is among an add-on installed in Thunderbird.
If that doesn't show improvement, the problem is not within Thunderbird but elsewhere in the system. Starting the computer in Safe Mode then helps confirm if the problem is in Windows (and not specifically in Thunderbird).
I understand you may not be comfortable doing this by yourself, perhaps ask someone close to help you in person, by showing them our answers here.

I am getting "Not Responding" message. The fix in the Help is confusing and doesn't seem to match my setup. Using Windows 7 & firefox 7.0.1

The problem started after last update. I tried following the directions in firefox Help without success. They were confusing and the instructions did not match what I was seeing on my screen. I need a simple quick fix thank you.

There could be more than one reason for such messages.
There is a problem sometimes with the database file used for history and bookmarks see
* http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
There was a change made which seems to affect some Windows users, and has a workaround, but tends to result in images etc not loading rather than a not responding message see
* [[firefox never finishes loading certain websites#w_lower-the-max-number-of-http-connections]]_lower-the-max-number-of-http-connections
Are you getting any other error messages, or indications of problems ?
* not directly related to an update but also see [[firefox hangs]]
* and [[Firefox is already running but is not responding]]
P.S. I note you have BrowserPlus, that has sometimes, recently, been associated with firefox problems, it would certainly be worth trying temporarily disabling that.

Saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

None of my pictures that I uploaded into iPhoto are in my Finder under Pictures. Should I copy and paste my folders from iPhoto into here, in case something happens to my iPhoto program (in addition to backing them up onto an external hard drive like I already do)?
No, that's just wasting space. A back up needs to be on a different disk.
Your photos are within the iPhoto Library.

My Firefox won't quit and gives a "not responding" message after I use Google Mail. I have tried starting in "safe" mode and the problem still occurs.

I have an issue where Firefox wont' quit and gives a "not responding" message after I have been using Google Mail. It works fine when I am not using that program. I have tried Safe Mode and the problem still happens when I go to Google Mail, so it is not connected with add-ons, extensions, etc.

Many site issues can be caused by corrupt cookies or cache. 
Clear the Cache 
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
 and 
Remove Cookies '''''Firefox/Tools > Options > Privacy.''''' 
Under '''History''', select Firefox will '''Use Custom Settings'''. 
There is a button on the right side called '''Show Cookies'''. 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; '''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Poke around safe web sites and see if there is still a problem. Then restart.

When I try to clear browsing history the page locks up and I get a 'programme not responding' message

I go to 'Tools' click 'clear browsing history'. Nothing happens and when I try to shut down the page, the 'Programme not responding' box appears.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Why come up the "service not responding " message during operation

Similar Messages

Maybe you are looking for