Why date and time do not show as links in some email message in 4s?

why date and time do not show as links in some email message in 4s?

To add it back, tap the Edit button at the top of the list of mailboxes and select the missing email account so that it has a tick against it (you can also change their order in the list by dragging the parallel line icon to an account's right), tapping Done should then get it to show in the list

Similar Messages

  • Date and time inidacator not showing up

    I have recorded on mini DV tape with the date and time indicator on, but when I try to log and capture it into FCP for editing, the date and time is not there. I'm sure it's on the tape as I have played it back on several several different tvs and monitors, but for some reason I can't get FCP to read it.
    Please advise if you can.
    Chorine
    G 4   Mac OS X (10.4.8)  

    Playing back the tape in the camcorder that originally recorded the tape with the display output activated, doesn't mean that you actually recorded the date & time as part of the video. Check the user's manual of your camcorder to find out how to record date & time as part of the image - not just to a data track. FCP doesn't access the data code info.
    -DH

  • Date and Time Stamp not showing up on import?

    I recorded with date and time stamp on my Sony Sr-11 and when I import it in iMovie 11 it's not displayed.  Please help so when I import it shows up in iMovie 11.

    Playing back the tape in the camcorder that originally recorded the tape with the display output activated, doesn't mean that you actually recorded the date & time as part of the video. Check the user's manual of your camcorder to find out how to record date & time as part of the image - not just to a data track. FCP doesn't access the data code info.
    -DH

  • The setting date and time is not working

    Bought an apple TV, installed it as per instruction, connected to my internet but the seting date  and time is not occuring and the activation cannot occur either.  Spent 1 hr on the phone with Apple support staff - they told me it may be a router blockage and to contact my internet provider.  contacted internet provider , they tell me everything is working from their end so must be the apple TV device.  I was told this was easy techonology and that I would not have issues - I have spent 3 hrs on this and truly frustrated as its not working .  any suggestions would help!

    That would be a network issue as you were initially advised. When the date and time can not be set it means it is having trouble connecting to the network.
    Make sure router is up to date, reboot router and ATV. Make sure location is set correctly via ATV and also DNS (settings - general - network - configure DNS - automatic)
    Make sure your router allows access over port 123.
    Failing that try a restore on the unit

  • The date and time is not working after setting it to current date and goes back to may,26 2011

    the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

    On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar).  Also make sure your date and time on your computer is correct as well as the Time Zones on both.

  • My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

    My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

    Howdy eewebe13,
    So you have no cellular service but are on Wi-Fi yet iMessage and Facetime are waiting for activation.
    Please step through this article for that scenario.
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    Thank you for visiting Apple Support Communities.
    Nubz

  • HT2822 apple tv just says date and time will not connect press menu button on remote,dose nothing then goes to screen saver shots of animails

    First time connecting apple tv just says date and time will not connect press menu button on remote,dose nothing then goes to screen saver shots of animails

    Read this: http://appletv2.com/stuck-on-setting-date-and-time-fix/

  • The date and time will not set why?

    It keeps saying selecting date and time but never does. I tried signing in with my apple ID and it says to set date and time first and the only thing it lets me select is state.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • "RT Set date and time" does not set seconds in UTC mode

    Hallo,
    I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value.
    Even the vi shows this behaviour: I set up a vi in which the time is set in a loop (100ms delay) and read again. When I set local time the clock stops (as expected) but when I set the UTC time the seconds keep on running...
    Can anybody help me with that problem???
    Thanks
    Florian
    Solved!
    Go to Solution.

    Hi Andreas,
    well it does not matter if I set a time zone in the MAX or not. In my example I was working on UTC + 0 but even when I set it to my local time (UTC + 1) I get the same behaviour modified by one hour.
    My LabView Version is 8.5. In in the MAX under Software-> LabView-RealTime it says that I am using 8.5.0.
    I suspect  that the settime.out which is installed on the cRio is probably the root of the problem as VxWorks itself does not offer a function (at least I did not find one) to convert from broken down system time to system time in seconds. There only exist one to convert from broken down local time to system time in seconds ( mktime() ). The reverse function is available for both cases: gmtime() and localtime(). I also did not find a way to find out the offset of the local time. So I have to use the library function settimeUTC() from settime.out.
    As I offered I can send you the settime.out file from my cRio for reference or maybe you can tell me how to find out what the version of the file is. It seems not to be an ELF file as I looked inside it to find some timestamp or version info...
    Thanks so far 
    Florian

  • Date and time formatting not responding

    I'm trying to total a column based on a date or date window.  My formula looks like this.
    SUMIF(Date,B1,'$')
    I have 2 tables.  The table with the formula references the other table, and compares Date in table 1 to B1 in table 2.  B1 is a date I enter to see a specific total for that day only.  It only works if all the times of the date window are 12:00:00 AM.  , and the B1 times are the same ..... Even though times are unimportant to the totals I need, and both are formatted to "none" and do. It show.
    So, how do I total a specific date with various times, but all the same date?  I have a sample file if it will make more sense to see it.
    Not that it matters, but I am doing this on an iPad, but the formula still did not respond correctly on Mavericks either.  Unless I set all times equal to B1.
    Sorry if I didn't explain very well.  I'm new at this formula thing. 
    Thanks
    Jeff

    Hi Jeff,
    The entered date in B1 will have it's time part set to 00:00:00 (midnight, at the beginning of that date). To use SUMIF to filter the date and time values in Table 1, you would need to write a single condition that would accept all date and time values falling on the date in BI, and reject all date and time values falling on days before or after that date.
    SUMIFS allows you to specify multiple conditions, all of which must be met to acept a test value and add its associated sum value to the total. Here's an example:
    The formula in B1 of Table 2 is shown below:
    B2: =SUMIFS(Table 1 :: B,Table 1 :: $A,">="&B1,Table 1 :: $A,"<"&(B1+1))
    Syntax: =SUMIFS(sum-values,test-values,condition,test-values,ˆcondition)
    Regards,
    Barry

  • Installed new Mountain Lion now Date and time do not update

    Hi,
    I have a new Macbook pro bought June 2011 and find that using Safari and playing a Flash Movie it will glitch the movie stallas and will nor play correctly.
    I see Kernel tasks are at 700 Mem and CPU at aaround 7%.
    So i reinstall a new downloaded system from Apple Mountain Lion.
    Stiil kernel Taskc are at 3 to 5% and and mem at 650meg
    I still get the glitches in the new Safari and now i see the Date and time shows but is frozen till i click in the data and time in the upper right hand corner of the screen it will then Upate the time.
    What is the problem here a clean install i see permissions have many errors after a clean install and will not fi, with disk utillities
    any help here please
    Thanks for any time given

    wersix wrote:
    How do I remove these? Do I just delete the folders using Finder? I'm new to Mac OS X.
    I'm seeing a number of posts about network printing problems after upgrading to Mountain Lion. I'm guessing the problem is something other than the drivers themselves.
    I sure appreciate your willingness to help me out with this!
    Yes, just delete the folders.
    There could be other problems, not driver-related, but updating to the most recent drivers will at least eliminate that possibility.
    Happy to try to help.

  • Date and time settings NOT sticking help me please :(

    My date and time is stuck in cupertino ????
    Doesnt matter what I do with the correct london setting as soon as a go to the home screen and back its changed back to cupertino??
    Im at a loss.... ?????????
    Ive synced and everything??????????

    I had the issue after using the reset button within the iphone then re syncing with itunes.
    Later I did a full restore from itunes where it downloads software 2 and installs, then I re synced all my music ect!!
    Problem gone I got London to stick, and my twitter app is showing correct times again. To be honest I dare not look in date and time again in case I tempt fate, but of now all times on apps are correct...lol

  • Entourage Calendar Events: Dates and times are not being saved accurately

    After an event has been created and saved, the date and time will change pushing the event forward, but not consistently. Some events jump forward a few hours others an entire day or more. I've been using this program for many years without fault but this problem started several days ago after a recent automated software update. It is not only happening with newly created events, it has also altered events saved weeks ago! (note: time zone is set accurately in the System Preferences and Entourage)

    I would check Microsoft's Entourage 2004 forum to see if others have experienced the same issue. Entourage 2004 has been replaced with Entourage 2008 awhile back. It may be those issues are fixed with 2008 and will never be in 2004, or you may need a later patch for 2004. If the automated software update was Microsoft's I'd contact Microsoft, if it was Apple's, this may just be a sign you need to upgrade your Microsoft to keep up with Apple. Whenever you do a system level software update you always need to verify compatibility bugs don't exist with the newer system when you are talking about other third party software. There are way too many third party software titles out there new and old for Apple to test with its own system given the time frame people desire updates.

  • Filter a list-views on page by Date and Time column, not only by Date (Connected Webpart)

    I have a task - create a page and display on it all lists/libraies with documents of team meetings. Every meeting has a documents and another information, which is storing in the same lists/libraries  on website as another meetings. Additionally there
    is a field "MeetingDate" (type: DateTime), which help to indetify a meeting documents.
    I have added all on one page and my custom connected webpart (IWebpartRow interface), which help to filter all views on page by field meeting date. It send a date to another webparts on page, and user see information only for this date.
    It works fine, but the problem is, that it used only DATE (without time) and i need now to filter all by date and time. 
    Unfortunately, i noticed that i cannot filter items by date with time in the standard list too. Please see my screenshot.
    My question is: may be i should use another interface (not IWebPartRow) that to send 2 values (1 - date, 2 - time) and filter all by 2 columns. Is it possible?
    Unfortunatelly i didn't find something like this. I found only a solution to build url like 'http://sp2013/SitePages/Homepage.aspx#InplviewHasha2528afc-50c3-4d5e-aae9-682400976409=FilterField1%3DDatum-FilterValue1%3D2015%252D02%252D27-FilterField2%3DCustomTime-FilterValue2%3D11%253A00'
    , but it looks not so good ..(
    from MSDN forum...

    Hi,
    Per my understanding, you might want to display all the specific documents in a page, they can be filtered by values of a Date and time column.
    A possible solution I will provide is that, we can create custom visual web part to display all these documents. In the code behind, run a query with CAML to retrieved all the
    documents with the specific date and time, then generate a view of hyperlinks that points to these documents.
    In this way, we can combine the filter component with the data display component into one web part, with the help of CAML query and Object Model, it would not be a tough job to
    implement such a solution.
    More information about CAML and Object Model:
    https://msdn.microsoft.com/en-us/library/office/ee536691%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Thanks
    Patrick Liang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Adjusting date and time does not work for pictures from one camera.

    I have a set of pictures taken with a Casio EX-Z20 camera in my Aperture 2 library. Because the clock of this camera was off by a few hours I changed them all at once with the option "Adjust date and time...". This worked well and when I sorted the images from different cameras by date in Aperture they were in the order.
    When exporting all the images as JPEG the images in the set from this camera was reset to it's original.
    That was very strange, I decided to try and change the date of these images in the master files as well by checking the checkbox "Also change master files".
    When I change the date from 15-10-2008 18:34:44 to 16-10-2008 10:34:44 (+16 hours) the date of the image changes to 16-10-08 01:36:43 GMT+02.00 (+9 hours, 1 minute, 59 seconds).
    When I change the date from 16-10-08 01:36:43 to 16-10-2008 19:36:43 (+18 hours) it ends up as being 16-10-08 10:38:42 (+9 hours, 1 minute, 59 seconds)
    When I change the date from 16-10-08 10:38:42 to 16-10-08 10:48:42 (+10 minutes) it ends up as 16-10-08 01:50:49 GMT+02:00 (-8 hours, 47 minutes, 7 seconds)
    I have worked around this problem by adding some hours to the desired time and eventually got it about right, but this is still a very annoying problem. Has anyone else encountered it or know of a way to avoid it?

    {quote:title=JohniBook wrote:}
    Has anyone else encountered it or know of a way to avoid it?
    {quote}
    I certainly have had issues regarding wrong dates, time stamping and DNG's in Aperture. There have been posts here from others as well with the same kind of date problems.
    I have reported the bug to Apple and hope for a solution to the issue in a near future.
    Regards
    Paul K

Maybe you are looking for

  • Deployment problem from Jdev (V 11.1.2.0.0) to stand alone weblogic v10.03

    My environment is Win 2008 server 64. I'm trying to deploy to a stand alone server. I added the adf runtime libraries following: http://radalcove.com/blog/?p=34 Created the app server connection and when trying to deploy to the stand alone server I r

  • Solution Manager 7.1 Basic Configuration error

    Hi guys  I'm having problems with accessing the basic config wizard via spro, i'm also having the same issue trying to run "solman_setup" and "workcenter". For both issues i get "Internet Explore cannot open the webpage". The ITS is activated along w

  • BPS_WB: XML Data Import???

    I see that there is a menu option to display the Web Interface configuration in an XML Format.  I want to be able to modify XML and Import back into BPS_WB.  Is there a program or function module that would enable me to do this? Also, it would be nic

  • Crash at start up photoshop on mac  for unexpected end-of-file encountered

    Hi, When I try to start Photoshop. I have the splash screen and it starts loading but when arrived at loading preferences, it stops and I have the error message : unexpected end-of-file encountered. Then "could not initialize photoshop because the pr

  • Dueladapter

    Hi, I have got a new Laptop with the newer pcexpress, I have seen a Dueladapter that converts the port bact to PCMCIA, have anyone used this devices for connecting the 6036E PCMCIA DAQCard and if so did it work, has my al;ternative will be to buy ano