Why do audiobook tracks disappear after ripping to library

I have been ripping audiobook cds to iTunes on my Mac for several years without any unsolvable problems.
Recently, fully ripped and saved audiobooks will have anywhere from 2 to 6 tracks missing from each disc in the set. I am not best pleased. Having to re-rip 24 discs is time consuming and having to check every audiobook before syncing is the only way to assure I have a full set of tracks for each disc.
I've searched my harddrive for the missing tracks with Spotlight to no avail.
I do not have any other libraries. I use only iTunes on the Mac.
Any clues?
BMaryann

If you would like to create a new project and set up a topic with your CSS in it, I will take a look at it. How to send it is described on the Contact page on my site.
The most common issue with upgrading to 8 was lists. You can read about that on my site. Look under RoboHelp > Lists.
With 8 the big issue was a bug that will not affect you in 9. The project lost track of files.
I cannot help you on the FM integration and suggest you post a separate question on that aspect at http://forums.adobe.com/community/robohelp/robohelp_framemaker
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Why do my images disappear after I animate them and choose the playback button to preview the animations

Why do my images disappear after I animate them and choose the playback button to preview the animations

Sorry, but the information you provide isn't even close to the amount we need to help us help you:
FAQ: What information should I provide when asking a question on this forum?

Why did my ringtones disappear after i sync my iphone4

why did my ringtones disappear after i sync my iphone4. I checked them in the 'tones' and clicked 'sync' and they are still not showing up on my phone???

Make sure you have checked on your Device Settings > Sounds > Ringtones > they should appear under Ringtones categories and listed above the system ringtones that came with IOS.
If you still don't find them, uncheck 'SYNC TONES', sync then re-check SYNC TONES and sync again.

Why do my pictures disappear after I send them in an email?

Actually, it's my hubby's problem. He has an iPhone 4S using iOS5. His job requires him to take pictures and email them back to the home office. The last few days everytime he emails the photos, they disappear from his camera roll. And the last time, the email wasn't received in his office, wasn't in his "Sent" folder and the pics were gone from his camera roll. Anyone have any ideas?
Thanks in advance for any help!

In Mail, Control-click on the Inbox and choose Account Info. In the resulting dialogue, is the Inbox said to contain any messages? If setup as IMAP in Entourage, and as you report the messages are in the Inbox (which in IMAP resides on the server) then they must still be on the server.
What I describe above is for normal IMAP operation -- I am unfamiliar with RackSpace; can you provde a link to it description of operation? Some implimentations present a subset of messages and can be impacted by what device or program first connects.
I would suggest quitting Entourage, and checking to see if the message still disappears after reading in Mail.
Ernie

Why are my notes disappearing after a few days?

I have an I-Phone 5, purchased last March. I have upgraded to IOS 7 when it first came out, no problem. I have been making lists of my packing boxes and they keep disappearing after a few days. I am wondering if sync is wiping them out. Anyone else having a problem with the notes feature?

Yahoo is holding Notes as hostage. Check your Yahoo account settings.

Why did my project disappear from the project library?

I recently finished a project, exported it to the "project file" in the Movie folder, and from there burned it to a disk. No problem. Since then, I have been thinking about making a couple of changes to the project, but when I opened the Project Library in iMovie, lo and behold, it was nowhere to be found. All of my other projects were there, but this one was gone.
I looked in the project file in the Movie folder, and there it was, along with the movie, but I can't edit it any further in its present location. If it were in the project library (where it belongs), I could certainly edit it, but I can't figure out how to get it back there, so to speak.
Two questions: first, why did it disappear from the Project Library, and second, what can I do about it now? I could always start from scratch (using clips in the Event Library), but that means doing everything over again, which I prefer not to do. Any ideas?

I've got the similar problem:
https://discussions.apple.com/thread/3628821
any one able to solve it???
I've also restarted a million times but it still doesn't seem to work...
thanks

Why the movie subtitles disappeared after i mirror to Apple TV?

I have a mac air, and i also have apple tv3. I wanna use itune to mirror the moive to Tv.It works with no problem, the only problem is after the movie mirror on TV, the subtitles just disappeared. I have no idea why. But if i just play the movie in itune, the susbtitles is on the screen.
Can anyone tell me why and how to solve this subtitles problems? My movie format is mp4.
thank you

Well yes I rented in HD, as many times it is stated on Apple website that Apple TV can display and show movies in HD. It is this the issue?
I have to rent it in SD?
Thks

Why does the waveform disappear after editing in Sound Booth?

It happens consistently with CS4 on 2 different computers. I right-click the audio track and select Edit in Adobe Sound Booth, and SB opens the audio for editing. I edit the audio, and it updates the audio. I know it does, because when I play back the edited section, it's correct. But the waveform is gone! I tried playing around with the display style -- disable and enable waveform, keyframes, etc. -- but the audio track doesn't display anything. I have to exit out of Premiere and re-start it to see the waveform again.
Anyone else experience this?
Also: when editing the audio in SB, is there a way to substitute the PP audio track with a multi-track? I know I can export a multitrack as an .aiff and import it into PP, but I was wondering if there's a way to link it.

Thanks for responding, but the thread you mentioned seems to be about a mirror-image problem: waveform not appearing in Sound Booth. In my case, SB is working fine and displaying the waveform properly, which is why I posted my question in this forum, instead.
The problem I'm having is the waveform not appearing in PPro. This doesn't seem to be a case of "it isn't a bug, it's a feature", because exiting and restarting PPro makes the waveform reappear. So it looks like it is a bug. Unless I'm doing something wrong or have a conflict somwhere.
BTW, I used to use Audition, but it had too many hardware issues and wouldn't run under 64-bit Windows. Have you tried it under Vista x64, or with dynamic links to PPro or After Effects? It seems that PPro, AE and Flash have been designed to work with SB rather than Audition.

Why do character styles disappear after an upgrade to RH9? And more...

I am trying out version 3 of the technical communication suite and have developed a few concerns about RoboHelp 9. I'm wondering if anyone has feedback on the following:
After opening a version 7 project in RoboHelp 9, I noticed that all of my custom character styles are gone. They are not listed in the "style" pane (when the drop-down is set to either "Character Styles" or "Paragraph and Character Styles"), and the text itself does not look correct. Has anyone experienced anything like this? I checked the RH9 release notes, and the three known issues listed have nothing to do with character styles.
On a broader note, I read elsewhere in this forum that upgrading from RH version 7 to either 8 or 9 can be painful. Does anyone know whether Adobe (or anyone else) has a list of upgrade warnings, or a list of proposed solutions for making the upgrade process go more smoothly? I'm not seeing anything in the official Adobe documentation, though I could be missing it.
Also, if anyone has an opinion on whether the FrameMaker-RoboHelp integration is better in version 3 of technical communications suite (compared with version 1, which is I am), I would be interested in hearing your reactions. After a first pass, the only part of the version 3 suite I'm really impressed with is the new Acrobat.
thanks,
Abby

If you would like to create a new project and set up a topic with your CSS in it, I will take a look at it. How to send it is described on the Contact page on my site.
The most common issue with upgrading to 8 was lists. You can read about that on my site. Look under RoboHelp > Lists.
With 8 the big issue was a bug that will not affect you in 9. The project lost track of files.
I cannot help you on the FM integration and suggest you post a separate question on that aspect at http://forums.adobe.com/community/robohelp/robohelp_framemaker
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Why do my attachments disappear after accepting a calendar invite?

At work we use a lot of calendar attachments to disseminate information. When we send out an invitation to a meeting, the consultant gets the invite, sees the attachments, accepts the invite, then the attachments disappear if he doesn't save them BEFORE saying yes. Is there a way to change that? Thanks.

Gotcha, hmmm . I would agree, then - try out the external adapter. If it works, we know there's a good chance it's your on-board adapter. If it doesn't work, we know it may be something else, so you could try option 2 below:
Option 1, if the external adapter does solve the problem:
If it works, we know it's likely your on-board wireless adapter. So, if you haven't already, let's try installing the drivers for the adapter itself this time (not the ones for MiFi, but for your actual adapter). You can do this via Device Manager.
Option 2, if the external adapter doesn't solve the problem:
Well, maybe a new approach. Are you sure all of the drivers for your wireless adapter, your LAN adapter (unless it's the same) are updated? Matter of fact, if you haven't already, perhaps try running a scan to see if ANY of your drivers are out of date? It's crazy, but sometimes having something as seemingly irrelevant as a sound card or other driver out of date can cause a weird problem somewhere else.
If you arent sure about the drivers on your computer, I would recommend PC Pitstop. They have several computer scans, all free (and malware/spyware/bloatware free). To actually install the drivers you'd need to purchase a license, but for our purposes here that shouldn't be necessary. All we want to do right now is figure out if any of your drivers are out of date.
Edited for clarity, some grammatical errors.

Why does border effect disappear after rendering? It's visible before.

I'm editing a project that needs a lot of pictures as b-roll. I used the standard border effect in FCP7 and everything looks great! Until I render it. And, then all or a portion of the border disappears. When I toggle the effect off, the border reappears just as it was when I first applied it. Render again, it disappears again. Confused. Any advice would be appreciated.

Thanks for all the input. I figured it out. Pictures were too large. You can all stop typing now.

HT201272 Why does my download disappear after paying? No way to download now.

How the **** do you get a download that iTunes screwed up? ITunes thinks I downloaded it, but it is nowhere to be found. This is b.s. I hate apple.

Should I have set both networks with the same name, which I guess would alllow the various clients to default to whatever is the fastest?
Is that how it works?
Not the fastest, the best quality connection, which is a combination of signal strength, speed, low noise and who knows what else the Apple engineers have come up with for the formula.
The default setting for the Extreme is dual band, using the same wireless network name for both bands. This is the setting that most users should use because their device(s) will automatically connect to the best signal available depending on their capability and location.
You can "force" a connection to 5 GHz by assigning a different name to that band, but this does not assure you that you are making a better connection. It might well be worse.
Why? The upside is that 5 Ghz is capable of faster speeds. The downside is that you always must give up something to gain something else. In the case of 5 GHz, the signals are not nearly as strong as 2.4 GHz signals, so the 5 Ghz signals are going to be absorbed much more quickly by any walls, ceilings, or other obstructions.
To really get good perfomance on 5 GHz, you almost have to have a line-of-sight relationship between the router and the computer. So, 5 Ghz works well if you are relatively close to the router and you have a clear shot at the Extreme. Move your laptop down the hall and around the corner and chances are, the 2.4 GHz signal is stronger (and possibly faster) at that location.

Why are my menus disappearing after 3 seconds?

I upgraded from 10.6.8 to 10.9.1 a few days back. Today my menus started behaving strangely. When I mouse-down on a menu (system or application) the menu closes by itself after about 3 second. It's making it nearly impossible to go into submenus because they lose before I can find where I am going.
In addition, after about every 50-75 characters, my keyboard is refusing to type character and giving me a beep. I don't know if this is related. I have to backspace and the keep typing.
Any ideas on what can be going on?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Why did my sequence disappear after exporting the project?

After a late night of editing, I rendered and exported the project (mp4). This morning the client asked for an edit, but when I open the project, only the source media are there. There is no sequence, and I haven't been able to find the file. Suggestions?
(First project in Premiere Pro after several years of using Premiere Elements.)

Here are the steps I would take...
1) Look closely into your project panel to see if maybe it's in there, just looking like media to you (I've made that mistake before) -- maybe switch to list view and it might be easier to tell the difference and compare the names/types. Also try searching on the sequence name if you know it.
2) If it's definitely not in the project panel, then go to File > Open recent > and see if maybe there is another project in the recent list that may contain the sequence you need.
3) If it's still not there, then like Jim said, you must have deleted it... Go to your 'Adobe Premiere Pro Auto-Save' folder (usually in the same parent directory as your Pr project files) and open older saved versions until you (hopefully) find one with the sequence you need intact.
4) If all else fails... Do you use time machine or some other incremental backup system? If so, roll back to a state where the sequence is still available.

Why do imported files disappear after disconnecting the card reader?

I recently replaced my hard drive and upgraded to OS X Yosemite 10.10. I restored my computer from a backup on an external hard drive. Since then, Lightroom 4 has been losing my files. They appear to import normally and are still in the catalog as long as the card reader is plugged in, but as soon as I disconnect the card reader Lightroom can no longer find the files and they do not show up when I attempt to search for them by name. What's going on? How can I get Lightroom to store my files as it did before?

Move and Add are normally disabled for non-hard drive removable media. This is to prevent people from losing photos and all the work they might have done on those photos.
Normal Procedure is to:
1. Insert your camera's media
2. Import into Lightroom using Copy which will make a duplicate of your file from your media and store it on your hard drive (or external hard drive - which ever you specify)
3. Remove media
4. Work on your images in Lightroom from the location they were copied to - never from the original media
Lightroom 4 - Importing and Organizing Your Images | Getting Started with Adobe Photoshop Lightroom 4 | Adobe TV

Why do audiobook tracks disappear after ripping to library

Similar Messages

Maybe you are looking for