, why do I get "Color Finesse requires a minimum screen size of 1024x768 yet I've got two full HD sc

Hello,
Once I try to open 'full interface' on color finesse 3 on After Effects CS5.5, why do I get: "Color Finesse requires a minimum screen size of 1024x768" yet I've got two full HD screens?
Thanks.

In addition to Dave's suggestions, if you haven't already done so, restart your computer. All we do is ask the OS for the screen size and check against 1024x768. We've seen on Windows that the OS gets confused sometimes and reports an incorrect size. Restarting fixes that.
When checking your screen size, be sure to subtract the size of the toolbar and any similar add-ons you might be running. Those all reduce the usable screen size, and we've seen cases (mostly laptops) where that reduces the height of the screen below 768.
Bob Currier
Synthetic Aperture

Similar Messages

  • Why am I getting messages such as "The command "Image Size" is not currently available" when trying to run an Action that has always worked in the past and when the particular Commands do work if used by themselves?

    Why am I getting messages such as "The command Image Size is not currently available whenever I try to run an Action that uses the particular command (and which has always worked fine previously) and when the particular command works fine when used on its own?

    I would think that image size would always be available when there is an active document in Photoshop.  The only time I remember seeing messages like that where they should work was during the five month period when Adobe released CS6 with so many bugs which took Adobe five months to fix.  During those five month messages like that that should not have happen were common when action switch between documents.  Adobe would start processing the next Action step before the document switch completed, Any step that required an active document could fail with a mess stating the command is not available.
    Are you by some chance using CS6 version 13.0 CS6 without any updates.  Use Photoshop menu Help>About Photoshop.  If it shows CS6 version 13.0 you need to update CS6. .

  • Why do I get Colored bands on some images in LR4 and LR5, but not in Aperture?

    On some images -- both RAW and JPG -- when opened in LR4 or LR5, there will be one or two "curved" color abberation lines across the entire image. This doesn't occur when I open the images in Aperture. Any idea why? Thanks

    >Is it possible that Aperture is showing you the camera-embedded JPG by default?  What happens if you actually produce a JPG from the raw file in Aperture?
    Aperture works the same way as Lightroom in this respect. It will first show you the embedded jpeg and will render a new conversion from the raw data as soon as it can. So it is possible the OP saw the embedded jpeg, but that should not last long and certainly by now should have been replaced with a newly rendered preview. Either Aperture is more forgiving of a small defect in the raw file or Lightroom import is somehow getting corrupt files of the sd card and Aperture not (would be weird). Another option is that the camera raw cache is corrupt. This can be checked by emptying the cache (Preferences->File Handling->Purge Cache). Lastly, this might be a corrupt preview in Lightroom. Check this by zooming 1:1 on an offending area in the Develop module and seeing if it goes away.
    >I suspect that the curvature is in fact due to lens corrections, and that these lens corrections are always on
    I believe you are right. I remember vaguely that there is some default lens correction with some cameras like this that is independent of the lens correction module. No clue whether the LX7 is one.

  • Why do I get "Podcast Authorization Required" popup box?

    Since recently applying the latest update to iTunes to version 11.2.2.3, I now get the following message in a popup box whenever I manually update my podcast list:
    Podcast Authorization Required
    To access this podcast, you need
    to log in to www.mevio.com
    It wants a login and password to be entered. Hitting "cancel" makes it go away, but it'll pop up again sporadically as iTunes updates my podcasts.  Any ideas on how to stop this from happening?
    Another issue (possibly related to the above issue) is that iTunes constantly freezes/"not responding" when I manually update my podcasts.  Both of these issues have occurred regularly since I applied the latest iTunes updates.  Am I the only one who still hasn't learned not to trust any iTunes update from Apple?
    Thanks for any help anyone can give me.

    Do you have an add-on called '''Ghostery '''installed? I tried it once myself and if you don't disable certain options, you get those purple popups appearing as can be seen in your screenshot. Go to Tools | Add-ons | Extensions to remove it.
    If you can't find it, try running Firefox in [[Safe Mode]]. If it works correctly in that configuration, then one of your other add-ons is the culprit.

  • Why Can't Get Color Images from My ADS Pyro IEEE1394 Camera

    This is a list of our equipment   :
    Windows98SE
    LV6.0i
    NI-IMAQ for IEEE1394
    Advanced IMAQ Library for LV
    Pyro IEEE1394 Webcam from ADS
    Unfortunately, we do not see any colors in the RGB Modus.
    We have visited your perfect support web sites and found a similar description.
    Document ID: 2DGHH1SN (09/17/2001)
    We used your support tip (change 1394IMAQ.sys and clean-up MAX) and anyway we do not
    see colors even though the PYRO IEEE1304 Webcam support color mode.
    We think the hardware of both IEEE1394 webcams (Pyro and IBOT) are the same.
    Did you received any feedback from the customer whos has the problem with the Orange
    Micro IBOT IEEE1394 webcam ?
    It is highly interested for us.
    We appreciate y
    our help and many thanks for reading and thinking about this manner

    Dear Keyle,
    Thanks for your response. Now, we have a running XP Home Edition Notebook machine.
    We have installed first LabVIEW6.0i then ADVANCED IMAQ VISON > IEEE1394 for IMAQ beta2 + MAX2.2 and finally
    VISION BUILDER 6.0
    We have observe the VISION BUILDER support during the custom installation process of NI-IMAQ 1394 b2 and unfortunately we running in the same problem and could not use the great VISION BUILDER together with our
    IEEE1394 camera. We see a big opportunity to develop our apllications faster and improve the time to market.
    It is possible to enclose the difficult situation ?
    Up to now, we are very happy to see colors in MAX and
    LV.
    Yes, we notice that we use a beta driver and we could
    not expect that it works perfect. But you wrote, that you have a running VISION BUILDER support with a XP machine and we are in a good mood to read this.
    We appreciate your help in this manner and thanks again
    Stephan

  • Can someone tell me why I keep getting a spinning wheel on my screen and it won't go away and I can't do anything while it is there Thank you

    I keep getting a spinning wheel in colors on my screen it will not go away and when it is there, I can't do anything it is as if the computer freezes Has anyone else had this problem or can someone help me out? Thanks very much

    the wheel comes and goes, it looks like the wheel of fortune wheel if you will it has colors all around it and keeps blinking, when it is there, I can't use the computer, it freezes up

  • Why do I get sent to the User Login screen to enter my password after sleep?

    Hi,
    On OSX Lion, 10.7.4. I recently had to reinstall the OS on a new hard drive in my iMac and now have an issue with it that I never had before.
    After prolonged periods of sleep (I haven't determined what the minimum length is before this will happen), when I come to wake the computer it shows me the User Login screen. Under my user icon is an orange checkmark, presumably to show that I am the user logged in. Otherwise it is exactly the same as the User Login screen one gets when the computer boots up. I select my user icon and enter my password and the computer unlocks.
    I haven't got this set up anywhere, that I know of. I don't have the 'Security & Privacy - Require password for sleep and screen saver' option checked, never have. If I do turn that on just to check, it's a very different password screen, a little popup window in the centre of the dimmed screen.
    How do I turn this feature off?
    Thanks,
    Owen

    Sounds like you may have deleted something you shouldn't have. Boot to an OS X DVD or a bootable backup, and using Disk Utility, do a repair disk, and while there repair permissions. Disconnect any peripherals, and reboot. If you get the same startup behavior, do a safe boot, by holding the shift key down when booting. If that works, try a normal boot. If neither step helps, you may need to relaod your operating system.

  • Why did I get no points when I bought stuff but when I returned it I got charged points for it

    That doesn't make any sense

    Good morning mizerytheraven,
    I can understand questioning why points that may not have actually posted to your account were removed from your account following a return.  It does not happen often, but on occasion, points have been known to be removed from a member's account before officially posting if a return/exchange is processed.  With that being said, you should see your account even out after the full 20 day pending period.
    If after 20 days it still appears that points were removed from your account that should not have been removed, please do not hesitate to send me a private message and I will see what I can do to further assist.  You can send a private message by clicking on the blue button located within my signature.
    Thank you for posting to the forum!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • How do I remove the now blank 'get started' bar to maximise the screen size?

    OK I've loaded Firefox 3.6.9 . I right clicked and removed the three buttons on the 'get started' bar. Now I have a blank bar wasting screen space. How do I remove it?

    View > Toolbars = un-check '''Bookmarks Toolbar'''

  • IPad iOS 8.0.2  My whole screen magnifies itself: I can not get it back to a normal screen size. How can I?

    Since updating my iPad 3 to 8.0.2, my screen is so magnified, it's unusable but I can't get back to normal-size to try to solve the rest of it's many problems like slow or not starting.  How can keep my screen at normal-size?
          I have already rebooted it from 20% charge. It is fully charged now.  Screen returned once on its own but again magnified.  It is so large that as you type the opening pass-code, ( if you can find circled  numbers of the pass-code at all)  then  only one number within a circle is revealed at a time.which makes opening the iPad  very difficult as it continually makes mistakes on the code. This iPad 3 is 6 months old, traded in  with a broken screen as my warranty ran out. The updates caused other problems but if iIcan't start, I can do nothing at all.

    Try double-tapping the screen with 3 fingers and see if that zooms it back out - and if it does set Settings > General > Accessibility > Zoom 'off'. If it doesn't zoom you back out then try triple-clicking the home button and see if that turns it off, and if it does you can change what a triple-click does via Settings > General > Accessibility > Accessibility Shortcut.

  • HT4528 The screen when accessing text msg or trying to type increases in size and I can't see the entire keyboard, also a problem in the basic screen the icons get huge, almost like the ipad screen size. How do I correct?

    Sometimes when using the text screen, the font for the keyboard increases in size limiting the view of the entire keyboard on the screen. So far the only way to correct is to poweroff the iphone and the poweron aqgain and the problem ius corrected. This also happens on the basic screen, the size of the icons are enlarged, to a size that you can only see one or two icons or parts of them.

    Try going to Settings>General>Accessibility>Zoom to be sure it's off.  If the screen is already magnified, double-tap the screen with three fingers to zoom out.

  • TS1702 Why am I getting "verification required before you can make a purchase on a free app?

    Why am I getting a "verification required before you can make a purchase" on a free app?

    because its per terms and conditions of itunes.  use a gift card if you dont have a credit card
    Peace, Clyde

  • Adobe's Color Finesse vs FCP's Color -mask tracking capability

    I just came back from the HD expo in NYC and one of the speakers/presenters there was a colorist.  He showed a commercial that he had colored using FCP's Color Application.  I came home to check out Adobe's Color Finesse for comparison and noticed that it did not have some of the features of FCP's Color, i.e. the ability to create a mask for the purpose of doing secondary color correction and to be able to track that mask to the object being corrected.  Is there a way to do this within Color Finesse or outside of Finesse even.  If not, what would be a Color Correction Application that you could recommend that is as robust or better than FCP's Color.
    Thank You

    One of the advantages of Color Finesse being a plug-in inside of After Effects is that you get to combine all of After Effects' features with Color Finesse's color correction capabilities.
    You can create whatever masks you want as an AE mask, and track those masks using AE'a built-in motion tracker, or use Mocha. Or you can hand animate the motion.
    When creating masks and tracking them, it's easiest to adjust the color correction parameters using Color Finesse's Simplified UI in the Effects Control Window, rather than the CF Full UI, although that is still available, of course. You may need to twirl open the Simplified UI in the ECW to see the controls. And you may want to twirl closed some of the slider groups so that you see only the controls you want to use.
    Bob Currier
    Synthetic Aperture

  • Why do I get a red static line across my screen when putting in my apple ID

    Why do I get red static lines across my screen when I put in my apple ID ??

    Crafting Actions Package UPDATED May 2, 2014 Updates some text and added StampExif Action and Script.
    Contains
    Action Actions Palette Tips.txt
    Action Creation Guidelines.txt
    Action Dealing with Image Size.txt
    Action Enhanced via Scripted Photoshop Functions.txt
    CraftedActions.atn Sample Action set includes an example Watermarking action
    Sample Actions.txt Photoshop CraftedActions set saved as a text file.
    More then a dozen Scripts for use in actions
    Example
    Download

  • I received an error "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt?  Never happened b4

    i received an error message "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt?  Never happened before. yesterday did the sofware update for maverick.

    Thank you for your response, Chris. But I'm afraid I have to disagree. There are native 64 bit versions of iTunes available for OSX and Windows.
    In a 64 Bit Windows environment native 64 Bit Applications install the DLL's in a directory called "Program Files" and a directory called "Program Files (x86)" (32 Bit applications only use the ladder).
    iTunes 9 is consistent with this behavior - and it identified itself to the system as a 64 bit application (meaning it's process appears without a "*32" tag on it).

Maybe you are looking for

  • Slow Hierarchical Query

    Hi, I have a hierarchical query which takes 2 seconds to execute. I need to get this down to milli seconds. The table has around 8000 records. The query will never return more than 20 or so records. There is only ever 2 levels to the query. I am quit

  • When I AirPrint it only does small portions of the page. How do I get it to print the whole page?

    When I AirPrint The printer only prints a portion of the page.  How do I get it to print the whole page.

  • Mail acting weird and lost all emails yesterday

    I live in Australia using the Telstra Bigpond internet services. Bigpond is a POP server (POP3 I think) and is in the process of migrating customers to the IMAP system. I am on the POP system. I successfully, I thought, installed the Mavericks update

  • Item category to control the sales qty?

    Hi experts   I hope to query how item category works ?  Now we found if the high level matieral item category as A, low level matieral item category as B.    In BOM, we set 1 A = 2B . When we place quote or sales order, it will say " the B item only

  • Handling w/selcolumn in table control

    Hi experts, I have a table control made manually, I set w/selcolumn field to NUM. How can I handle that if i select a row and then push the 'PUSHBUTTON' then it made a selection and goes to the next screen. So I only want to know how can we know whic