Why do I get Operation Failed. [Error Code: -17500]?

After test Stand has finished a test run and has generated a HTML file. I get the following Error Operation Failed [Error Code -17500]. The report is generated but not displayed in TestStand.

Hi,
Is this in the Operator Interface or the Sequence Editor,  and what version of TestStand are you using.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

  • Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Try the troubleshooting tips here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    You may have something in your project on one of the slides that is tripping up the publishing process.

  • Why am I getting an FTP Error code when I try to publish my Website?

    Every time I go to publish my website from iWeb to my Yahoo domain, it completes everything EXCEPT the background part. I end up getting an FTP Server Error Code. I have called Yahoo about the issue and they were not able to help. I have checked my file names for spaces. I have checked my FTP address. I have checked just about everything, this is becoming quite aggravating! Please, someone help?

    Unfortunately, Yahoo is notorious for being less than good at hosting with iWeb sites.
    Perhaps look into changing your web hosting to somewhere like http://www.godaddy.com or http://www.hostexcellence.com.

  • HT201365 why am i getting an unknown error code of  4013 when trying to restore my 4S

    Hi can anyone help please?, my Iphone 4s died on me early hours lthis morning.  It was whilst on charge and it made the noise as if plugging in and out the charger!!!
    I have tried to restore in Itunes, however, I keep getting the above error message!
    Thanks

    In the article http://support.apple.com/kb/ts3694 it says:
    Error 4000, 4005, 4013, 4014, and 4016
    After you perform each step, try to restore your device.
    Restart your computer.
    Disconnect all your USB devices from your computer and connect to another USB port.
    Use a different USB cable.
    Uninstall third-party security software.
    Try restoring using an alternate computer.

  • Why am I getting Installation Failed error when running Install package?

    Enterprise license holder here. Mac. I've installed ccplauncher, run it, and am now trying to run the Install.pkg. I'm getting an error:
    Already tried running disc permissions, still nothing. Erased all old versions of CS (5, 5.5, 6) from my HD using AppCleaner so no resources or plists left behind before installing CC.

    Jeff,
    You may want to use /Utilities/Console and look at /Library/Logs/Adobe/Installers to see where the failure is actually occurring. Even though it's one install package, it's installing each application in sequence. If only one fails (and all the others succeed) you'll still see the message you received. There can be a lot in the logs, but you can use the Spotlight field to filter out the lines with "return code." Anything other than "0" (zero) indicates something that didn't complete. You can also look for words like "error" or "fail".
    There are a bunch of things that can cause an error. I've sometimes had a problem with packages that include a lot of updates but rebuilding them seemed to fix it. Finding out exactly where the error is happening is a big help when you contact support.
    I realize this isn't a solution, but hope it helps.
    Ric

  • Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

    Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

    Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

  • SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

    Hi,
    I am trying to figure out how to fix my problem
    Error: Could not be opened. Operating system error code 5(Access is denied.)
    Process Description:
    Target Database Server Reside on different Server in the Network
    SSIS Package runs from a Remote Server
    SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
    SSIS Package use variables to specified the share location of the files using UNC like this
    \\server\files
    Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
    In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
    I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
    Below post it has almost the same situation:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

    Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

  • I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    Reset the SMC, as per > Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then retry the Disc Drive.

  • Why do i keep getting a 13019 error code?

    i keep getting a 13019 error code when i try to sync my ipod to itunes?? I did a hard reboot and now it won't even turn on. Please help!

    iTunes: Error 13019 during sync  may help.

  • I am trying to burn a CD and keep getting this error message: Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Sadly, that error has umpteen causes, sometimes the drive is going out, sometimes it's bad media, sometimes a slower burn works, & rarely a Cleaning Disc helps.
    Bad File names can even cause it...
    http://www.bbqiguana.com/2010/02/macos-x-error-0x80020022-trying-to-burn-dvds/

  • SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

    I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
    CREATE TABLE #promo (promo VARCHAR(1000))
    BULK
    INSERT #promo
    FROM '\\aseposretail\c$\nz\promo_names.txt'
    WITH
    --FIELDTERMINATOR = '',
    ROWTERMINATOR = '\n'
    SELECT * from #promo
    It's ok when I manually execute the proc in SSMS.
    When I try to run the report from BIDS I got following error:
    *Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
    Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

    I'm having the same type of issue.  I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another.  I get this error:
    Msg 4861, Level 16, State 1, Line 1
    Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
    I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager.  Still this one workstation is getting the error.  Since the same login is being used on both workstations and it works on one  but not the other, the issue is not a permissions issue.  I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine.  Any ideas on what the client configuration issue is?  These are the version numbers for Management Studio:
    Microsoft SQL Server Management Studio 9.00.3042.00
    Microsoft Analysis Services Client Tools 2005.090.3042.00
    Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
    Microsoft MSXML 2.6 3.0 5.0 6.0
    Microsoft Internet Explorer 6.0.2900.5512
    Microsoft .NET Framework 2.0.50727.1433
    Operating System 5.1.2600
    Thanks,
    MWise

  • Lenovo 3000 N100 Network issue / Wireless Stack initializa​tion failed, error code 117

    Hi,
    Lenovo 3000 N1000 with 1GB Ram, Win XP SP2, purchased in May 2006. WLAN network with WPA-PSK key worked without any issues so far and is still accessible with PC.
    After transferring music via from my notebook to my mobile Bluetooth all network adapters seem to be disconnected. Neither Access Connections (AC) nor Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network adapters have been removed. However I cannot spot any issue in the device manager as all parts are shown to be working OK.
    This is what I've done so far:
    1) Checked Radio switch ---> on
    2) FN +F5 --> connection on
    3) Uninstalled AC, downloaded and installed most actual version (5.00 Build 7VCX32WW)
    4) Installed new version for wireless driver for Intel(R) PRO/Wireless 3945ABG (version 12.0.0.82)
    Still, even if I uninstall AC to check if WLAN is working at all, Windows gives the error message that all network components have been removed.
    Diagnose Tool gives the following output:
    "Wireless Stack initialization failed, error code 117"
    Logfile:
    Description : Intel(R) PRO/Wireless 3945ABG Network Connection
    Type : Wireless LAN Adapter
    DriverVersion : 10. 5. 1. 59 ----> why is the old driver version??????????
    PNPID : PCI\VEN_8086&DEV_4227&SUBSYS_10118086
    SupplicantVersion : AEGIS Protocol (IEEE 802.1x) v3.5.3.0
    ERROR AcSvc( SYSTEM(Prvlg).1108.4580) [9/3]11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing! 
    Hope this is enough information for anyone of you in order to suggest any solution. As I could see from previous threads some of you experienced similar problems in the past and could fix them somehow. However I couldn't find anyone with exactly the same problem.
    Thanks much in advance for any advice you might have.
    Flo

    Hi
    I have this problem also with my Lenovo 3000 V200.
    Sometimes when I boot up the PC it will connect to the network and everything works just fine.
    At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
    and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
    If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
    access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
    the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
    to get networking up.
    I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
    at seemingly random instances in time. This is obviosly a problem with the Access Connections software
    since the Wireless networking works fine when I let windows manage it...
    Anyone with a fix?
    /Fredrik

  • DVD Burn fails (Error code 0x80020022), newish drive, just applied updates

    Hello,
    when i try to burn a data dvd with a variety of files from finder on my power mac g5 it thinks a while and then fails with the message:
    Burning the disc failed because communication to the disc drive failed (Error code 0x80020022)
    I just downloaded the latest OS updates last night.
    Disc utility showed permissions problems in some files on my boot drive including in a darwin folder but they repaired fine.
    Two weeks ago apple replaced my superdrive and i hadn't tried burning a dvd since then, but cds did and do burn fine.
    This computer is under warrantee but in case the latest software updates caused this, or if someone has an easy fix that would allow me to save the trip to the store for analysis and potential couple day wait...
    i'm all ears!
    Thanks, Will
    Software overview
    System Version: Mac OS X Server 10.4.8 (8L127)
    Kernel Version: Darwin 8.8.0
    SONY DVD RW DW-U21A:
    Firmware Revision: AADB
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    hardware
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (2.2)
    Number Of CPUs: 2
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (2.2)
    Number Of CPUs: 2
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Power Mac G5   Mac OS X (10.4.8)  

    Thank you for your help!
    At one point in the last few days i did run out of disk space on one drive, but i think i had 5Gig free on the short drive when i was trying it earlier, and i have upped that to 30.
    My spindled HP DV-16Xs worked on the drive i had before pretty darn well.. I've tried a bunch of unlabeled ones, i've also tried burning at 1x, and i went out and bought some jewel cased verbatim dvd-r 16Xs, same problem.
    I will take one more shot at finding the best media using that website, get some 8Xs if i can find them, before hauling it into apple.
    without the dvd burner it's hard to backup very well, I was planning to get a external hard drive next month.

  • OBIA 7.9.5 "Financial Analytics" GL/AR Fact load fails "error code 36331"

    Hi all ,
    For Financial analytics7.9.5 below fact load getting failed "error code 36331".
    'SIL_GLOtherFact_Full' has failed.
    'SIL_GLCOGSFact_Full' has failed.
    'SIL_GLRevenueFact_Full' has failed.
    'SIL_ARTransactionFact_Full' has failed.
    Let us know how to fix this up.
    Should i need to follow the comments posted in this link
    Re: Help !!!  Re: Fianacial Analytics failed with Error Code = 36331
    thanks
    saran

    ORA-12520: TNS:listener could not find available handler for requested type of serverI've not seen this error myself, but looking on Google it appears to be an unsolved problem on OBIA.
    Since it's intermittent then it rules out obvious things like the Oracle database being down or the connectivity being incorrectly configured.
    Looking on My Oracle Support (metalink) I found discussion of the error with reference to a completely different product but around the issue of parallelism.
    If I had to guess I'd say that the keyword in the error is available - the oracle DB is being swamped with more requests that its configured to handle.
    My suggestion would be speak to your DBAs and ask them to monitor the number of sessions on Oracle DB whilst your ETL is running and watch for any limit being breached. If possible up that limit, or reduce the amount of ETL tasks running in parallel.
    I'd also suggest raising an SR with Oracle since it's evidently a not-uncommon problem.

  • QuickTime Install Failed Error Code -3 - At Wits End Ready to Return IPOD

    I have been trying to install QuickTime with Windows XP for the past 8 hours. First, I receive the message Install Failed Error Code -3. Then I uninstall software and download and get Error 1722 and the Error 1603 Fatal Error. I'm in a vicious loop of installing/uninstalling. Called Apple technical support and they walked me through the same steps I've been going through all day and I still have the same results. I'm ready to return my daugheter's iPod. I have looked at all the technical help available and have completed every recommended solution with no success. What am I missing? Suicidal in Chocolatetown, USA.

    switch off antivirus and antispyware applications
    Download Quicktime 7.0.3 Standalone Installer
    http://www.apple.com/quicktime/download/standalone.html
    Run the install from your hard drive, not over the internet
    That should fix you up.

Maybe you are looking for