Why do I get this error when running the PID Control-Single Channel.vi: "Requested value is not a supported value for this property."
Error -200077 occurred at Property Node DAQmx Timing (arg 3) in DAQmx Timing (Sample Clock).vi:1->PID Control-Single Channel.vi
Requested value is not a supported value for this property.
Property: SampQuant.SampMode
You Have Requested: Hardware Timed Single Point
You Can Select: Finite Samples, Continuous Samples
Author: Pcorcs
Attachments:
PID Control-Single Channel.vi 53 KB
Actually I have already tried a few things you suggested and got as far as the DAQmx Write vi. The error at the DAQmx was a buffer error indicating i needed to set it to 2 instead of the default of 1. Tried using the DAQmx Input and Output Buffer vi to change buffer, with no luck.
Attachments:
PID Control-Single Channel.vi 53 KB
Similar Messages
-
Why do I get an error when I try to configure a channel with the tktds7x4 driver?
I use the TDS754D scope. My complete function call is:
errStatus = tktds7x4_ConfigureChannel( ScopeHandle, "CH1", 5.0, 2.0, TKTDS7X4_VAL_DC, 1.0, VI_TRUE);
When I step through it, I see that I get an error on the driver line
viCheckParm(Ivi_SetAttributeReal64 (vi, channel, TKTDS7X4_ATTR_VERTICAL_RANGE, 0, range), 3, "Range");
I'm also getting an error with tktds7x4_ConfigureEdgeTriggerSource
I just downloaded and installed this driver, and it is the first time I have tried to use it. I'm running it in Microsoft Visual C++ 6.0, but it is a C program.I hadn't done too much debugging when I wrote the question. All I knew was that I got a timeout error when I used that call. Over the weekend I tracked it down to a problem in the function tktds7x4_InvalidateTriggerAttributes, and specifically, the line
checkErr( Ivi_GetAttributeViString (vi, VI_NULL, TKTDS7X4_ATTR_INSTR_COMM_TRIGGER_SOURCE, 0, BUFFER_SIZE, triggerSource));
My scope does not have the 2C option, so there is no communication trigger function. When the driver queries the communication trigger source, the scope apparently does not return anything because it does not understand. I added the lines
if (!strcmp(triggerSource, channelName))
checkErr (Ivi_InvalidateAttribute (vi, VI_NULL, TKTDS7X4_ATTR_TRIGGER_LEVEL));
checkErr(
Ivi_GetAttributeViInt32(vi, VI_NULL, TKTDS7X4_ATTR_INSTR_OPTIONS, 0, &options));
if (isOpt2C)
before that line of code (at line 7360), along with a closing brace before the label "Error:"
Also, at line 399, I added the following 3 lines:
{ "CH1" , "CH1" },
{ "CH2" , "CH2" },
{ "CH3" , "CH3" },
{ "CH4" , "CH4" },
even though the comment for triggerSourceStringTableEntries says that it is for non-channel sources only. I am not positive that it was necessary, but I think it was.
With those changes, the driver now works correctly for me. I have attached my updated driver source code. I am never happy to change a commercial driver, though. If someone were to re-download this driver and re-install it, all my changes would be lost, and the driver would no longer work.
Attachments:
tktds7x4.c 664 KB -
select
min(h.[Spcl Order]),
(select (case when sum(pro.[Quantity]) is null then 0 else sum(pro.[Quantity]) END))
+
(select (case when sum(A.[Quantity]) is null then 0 else sum(A.[Quantity]) END),
min(b.[Posting Date]),min(c.[Order No]),min(d.[Prod_Order No]),min(e.[No]),
min(f.[Item Category Code]),min(g.[Location Code]),min(i.[Spcl Order_Purch])
from [tablename2] A
inner join [sample].[dbo].[Posting Date_PRL] as b on a.[Posting Date]=b.[Posting Date]
inner join [sample].[dbo].[Order No_PRL] as c on a.[Order No_]=c.[Order No]
inner join [sample].[dbo].[Prod_ OrderNo_PRL] as d on a.[Prod_ Order No_]=d.[Prod_OrderNo]
inner join [sample].[dbo].[No_PRL] as e on a.[No_]=e.[No]
inner join [sample].[dbo].[Item Category Code_PRL] as f on a.[Item Category Code]=f.[Item Category Code]
inner join [sample].[dbo].[Location Code_PRL] as g on a.[Location Code]=g.[Location Code]
inner join [sample].[dbo].[Spcl Order_PRL] as i on a.[Spcl Order]=i.[Spcl Order_Purch]
where ((A.[Item Category Code] = 'STYLES') and (A.[Prod_ Order No_]='') and ( A.[Buy-from Vendor No_] in ('S02052')) AND (A.[Quantity]>0)
AND ( A.[Posting Date] = pro.[Finished Date])))
from [tablename1] pro
inner join [sample].[dbo].[Spcl Order_PO] as h on Pro.[Spcl Order]=h.[Spcl Order]
where ((pro.[Status]=4) and (pro.[Finished Date] ='2013-10-10' )) group by pro.[Finished Date]As other suggested, please find the column list...there are many columns in your subquery...
eg:
Select *,(Select 1,2) From (Values(1),(2))A(MonthID) -- will not work
where as
Select *,(Select 1) From (Values(1),(2))A(MonthID) --will work
Your case:
select
min(h.[Spcl Order]),
(select
(case when sum(pro.[Quantity]) is null then 0 else sum(pro.[Quantity]) END))
+
(select (case when sum(A.[Quantity]) is null then 0 else sum(A.[Quantity]) END),
min(b.[Posting Date]),min(c.[Order No]),min(d.[Prod_Order No]),min(e.[No]),
min(f.[Item Category Code]),min(g.[Location Code]),min(i.[Spcl Order_Purch])
from [tablename2] A
inner join [sample].[dbo].[Posting Date_PRL] as b on a.[Posting Date]=b.[Posting Date]
inner join [sample].[dbo].[Order No_PRL] as c on a.[Order No_]=c.[Order No]
inner join [sample].[dbo].[Prod_ OrderNo_PRL] as d on a.[Prod_ Order No_]=d.[Prod_OrderNo]
inner join [sample].[dbo].[No_PRL] as e on a.[No_]=e.[No]
inner join [sample].[dbo].[Item Category Code_PRL] as f on a.[Item Category Code]=f.[Item Category Code]
inner join [sample].[dbo].[Location Code_PRL] as g on a.[Location Code]=g.[Location Code]
inner join [sample].[dbo].[Spcl Order_PRL] as i on a.[Spcl Order]=i.[Spcl Order_Purch]
where ((A.[Item Category Code] = 'STYLES') and (A.[Prod_ Order No_]='') and ( A.[Buy-from Vendor No_]
in ('S02052')) AND (A.[Quantity]>0)
AND ( A.[Posting Date] = pro.[Finished Date])))
from [tablename1] pro
inner join [sample].[dbo].[Spcl Order_PO] as h on Pro.[Spcl Order]=h.[Spcl Order]
where ((pro.[Status]=4) and (pro.[Finished Date] ='2013-10-10' )) group by pro.[Finished Date] -
Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC
I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx -
Why do I get unknown error when I try to add to my iCloud storage
Why do I get unknown error when I try and add storage to iCloud account ? I have funds in account but I do not have a credit card # on file.
This didn't solve it for me. Card details already there, and iTunes purchases working fine.
But just to be sure I' have re-entered and resaved my card info and checked, re-entered and re-checked my appleID info.
Still not working.
Anyone got any other suggestions? -
I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?
try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
Getting the below error when running the Baseline.grf for the first time
I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
at org.jetel.graph.Phase.free(Phase.java:487)
at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
at org.jetel.component.RunGraph.execute(RunGraph.java:302)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
at org.jetel.component.RunGraph.execute(RunGraph.java:324)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com -
I get this error when submitting the issue to DPS
Hi am using Woodwing Enterprise to publish folios to the Adobe DPS and it has been okay, I have finished creating of a new issue and I get this error when submitting the issue to DPS : Adobe Distibution Server returned error while calling "createIssue". HTTP code: 401. HTTP message. " Unknown error.". Adobe results message: " Unauthorized for access. See logs for further details." Adobe results status: " UNAUTHORIZED." The DPS account was recently renewed
Please contact gold support about this issue.
-
Why am I getting an error when I place two OAM files one after the other in different pages?
Why am I getting an error when I place two OAM files one after the other in different pages? They do not load or play correctly. They are both configured to play automatically with a .125 second delay and both have a white rectangle "poster" over for a hidden effect.
Thanks for the idea, Scott! I initially tried your idea, but my OAM files were still not loading correctly. I tried other combinations of OAM files, and it seems to work fine.
Back to my original OAM files: I made sure that my elements in my Edge Animate project had different names. I originally copied parts of some elements from one to another, and I think it was confusing to DPS to read it. -
Why am i getting an error when trying to download ios6
Why am i getting an error when trying ios6
I have no idea. Don't think anybody else will be able to figure it out either from the information you have provided.
Might help if we knew the error message and/or number. It is a start anyway. -
Why do I get server error when logging into Icloud on my pc
Why do i get server error when i try to log into icloud control panel on my pc
document.write(''); document.cookie = 'CTINC=1; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'SiteStamp=XXDtZ12Ou3WtAF; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'Persistent_id_XXDtZ12Ou3WtAF=0BD14F766ACA:1318308966; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/';
-
Getting windows error during running the sql scripts from form 6i
I made a little form application. The purpose of this application is to generate explain plan for a particular SQL. Some sql scripts run internally in order to populate the result on forms screen after pressing the forms button but I am getting windows error during running the sql scripts from form 6i.
I am using forms 6i with patch 17 with Oracle 10G database on windows 2000 professional on same computer.
This application runs fine with 8i.
Please inform me where the problem is and how to overcome it.
Zafri.I am using Text_IO in my form's when button press trigger , inorder to create the
text file, then in the same when button press triger
I am calling RMAN via host command in order to run the script which was created by text_IO.
Below you find some of the code. I will appreciate if you solve the problem.
when button press trigger:
Declare
in_file3 Text_IO.File_Type;
linebuf3 VARCHAR2(1800);
output11 varchar2(1000);
BEGIN
output11:='C:\EXPLAIN_PLUS\misc\rm_file.bat ';
Host(output11,no_screen);
:sql.execution_plan:= 'Working........................';
synchronize;
in_file3 := Text_IO.Fopen('c:\explain_plus\misc\create_table.txt', 'w');
Text_IO.Put_Line(in_file3, linebuf3);
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' run { sql "create table PLAN_TABLE (statement_id,...object_name varchar2(30),object_instance numeric,object_type varchar2(30),optimizer varchar2(255),search_columns number,id .....partition_start varchar2(255),partition_stop varchar2(255),partition_id numeric,other long,distribution varchar2(30)) "; } ');
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' ');
Text_IO.FCLOSE(in_file3)
Declare
un VARCHAR2(80);
pw VARCHAR2(80);
cn VARCHAR2(80);
output VARCHAR2(1000);
output2 VARCHAR2(1000);
dummy varchar2(40);
in_file Text_IO.File_Type;
linebuf VARCHAR2(1800);
BEGIN
Get_Connect_Info(un,pw,cn);
/* for Plan_table Begg. Second INNER BLOCK */
declare
dummy2 varchar2(40);
begin
select table_name into dummy2 from all_tables where table_name='PLAN_TABLE';
if dummy2 = 'PLAN_TABLE' then
output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\MISC\TRUNC2.txt ' ;
Host(output2,no_screen);
end if;
exception
when no_data_found then
output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\misc\create_table.txt ';
Host(output2,no_screen);
end; -- -
I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.
Follow this instruction exactly to the last line. It worked on mine.
Jolly Giant wrote:
daduser wrote:
"copying files failed, because you don't have permission to change your ITUNES media folder or a folder within it."
check if you have read & write permissions for your iTunes music (or media) folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. if permissions settings check out, click on the little gear-shaped icon and +apply to enclosed items+ like so
now try consolidating again. -
Error when running the ant task
Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java] at java.lang.Win32Process.create(Native Method)
[java] at java.lang.Win32Process.<init>(Win32Process.java:66)
[java] at java.lang.Runtime.execInternal(Native Method)
[java] at java.lang.Runtime.exec(Runtime.java:566)
[java] at java.lang.Runtime.exec(Runtime.java:491)
[java] at java.lang.Runtime.exec(Runtime.java:457)
[java] at weblogic.utils.Executable.exec(Executable.java:227)
[java] at weblogic.utils.Executable.exec(Executable.java:156)
[java] at weblogic.utils.Executable.exec(Executable.java:142)
[java] at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java] at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java] at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java] at weblogic.ejbc20.runBody(ejbc20.java:517)
[java] at weblogic.utils.compiler.THi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java] at java.lang.Win32Process.create(Native Method)
[java] at java.lang.Win32Process.<init>(Win32Process.java:66)
[java] at java.lang.Runtime.execInternal(Native Method)
[java] at java.lang.Runtime.exec(Runtime.java:566)
[java] at java.lang.Runtime.exec(Runtime.java:491)
[java] at java.lang.Runtime.exec(Runtime.java:457)
[java] at weblogic.utils.Executable.exec(Executable.java:227)
[java] at weblogic.utils.Executable.exec(Executable.java:156)
[java] at weblogic.utils.Executable.exec(Executable.java:142)
[java] at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java] at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java] at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java] at weblogic.ejbc20.runBody(ejbc20.java:517)
[java] at weblogic.utils.compiler.T -
New Output Module install generates an i/o error when running even on a single image.
Adobe *had* removed the Output Module from Bridge, and I see now there is a (tedious) "manual" install to "reinstate" the module available online, but it is not functional. It generates an i/o error when running even on a single image.
I'm afraid this is not helping the OP
There are already to many having this I/O problem showing in several other threads and in this forum there is still no solution found. Can you pass this on to Adobe Tech please?
Thanks
Maybe you are looking for
-
In reviewing all material that came with my new MicroPhoto (ZMP8GB) as well as reviewing this forum, I haven't found anything dealing with how to do a total backup of the Zen. I'd like to make a copy of the complete image of all my music and playlist
-
I set up my Sports Watch 42mm Space Grey on Monday, but I can't find the built-in contacts app anymore on the app screen: I can still see it in the iPhone Watch app listed under "My Watch" and change it's settings, but I can't get it to show. I know
-
Tomcat seems couldn't run after installing Oracle 8.0.6
After installing Oracle 8.0.6, my Tomcat seems couldn't startup. I have set the environment variable for JDBC and Oracle driver like: Classpath = .;c:\orant\jdbc\lib\classes111.zip and path = c:\jdk1.3\bin;c:\orant\jdbc\lib\classes111.zip. However, b
-
Problem in creating recovery media disks
I tried to create the recovery media and i am getting the message "Resources required by this application are already in use. Please retry after the other application completes". Can any one help me to solve this issue? I haven't created the recovery
-
IOException - WEB8001 - when writing to servlet response outputstream
I am attempting to port a Java servlet application from iws 6.0 to 6.1, sp2, but am encountering IOExceptions during load testing. The servlet composes its response in a character array, and then calls the following method to write the characters to