Why do we need the table TCURF?

Hi Friends,
Can't we get our currency translation job done without our sweet currency factors table TCURF. Say we want to convert fig's from FROM curr to TO curr at Daily avg rate (M) and we have an exchange rate as 2,642.34. Factors for this currency combination for M in TCURF are say 100,000:1.
Now my question is can't we have an exchange rate of 0.02642 and not at all use the factors from TCURF table?.
I suppose we have to still maintain factors as 1:1 in TCURF table if we are using exchange rate as 0.02642. am I right?. But why is this so?. Can't I get rid off TCURF.
What is the use of TCURF co-existing with TCURR.
Please enlighten me!!
Thanks
Raj

Hi Simon,
So now I can say to whole word what is the use of TCURF existence....am I right!!
Thanks you for sharing the knowledge.
Rgds
Raj

Similar Messages

  • Why do we need the HWM?

    hi,
    why do we need the HWM? Does the CBO use it? I mean, if we're doing a FTS, then the first unformatted block we hit in a MSSM tells us all blocks above it are unformatted, so we dont read anymore, so what is the use of the HWM?
    thanks

    OracleGuy777 wrote:
    hi,
    why do we need the HWM? Does the CBO use it? I mean, if we're doing a FTS, then the first unformatted block we hit in a MSSM tells us all blocks above it are unformatted, so we dont read anymore, so what is the use of the HWM?1) Why are you assuming that HWM is there FOR FTS? (as implied by the question) I would think that FTS uses HWM because it exists.
    2) Are all 'unused blocks' unformatted? Does that imply that something 'unformats blocks' when you drop a table?
    3) What happens when you truncate a table?
    4) My thought is that HWM is more for providing a starting position for Direct Path Inserts than anything else.

  • Why do we need Work Table in ODI???

    Hello All,
    Please help me on this..
    Why do we need Work table in ODI???
    Why ODI is creating c$_0table_name (work table)?
    Thanks
    Ravikiran

    Hi,
    this is the standard "Load Data" from LKM SQL to SQL
    +<%for (int i=odiRef.getDataSetMin(); i <= odiRef.getDataSetMax(); i++){%>+
    +<%=odiRef.getDataSet(i, "Operator")%>+
    select     <%=odiRef.getPop("DISTINCT_ROWS")%>
    +     <%=odiRef.getColList(i, "", "[EXPRESSION]\t[ALIAS_SEP] [CX_COL_NAME]", ",\n\t", "", "")%>+
    from     <%=odiRef.getFrom(i)%>
    where     (1=1)
    +*<%=odiRef.getFilter(i)%>*+
    +*<%=odiRef.getJrnFilter(i)%>*+
    +<%=odiRef.getJoin(i)%>+
    +<%=odiRef.getGrpBy(i)%>+
    +<%=odiRef.getHaving(i)%>+
    +<%}%>+
    as you can see in C$_ you could have some filtered data. If you have got a source table containing invoicing (10kk rows) you could filter last_update column and obtain 1k rows for example and copy only this tiny subset.

  • Why do I need the link spfileDBNAME.ora to +DATA/DBNAME/PARAMETER/spfile..

    Hi
    One month before I stated the question
    >
    Why do I need the an alias  spfileDBNAME.ora to *ASM-File +DATA/DBNAME/PARAMETER/spfile..*
    >
    in a RAC-Environment.
    Levi Pereira gave me kindly the answer in the Thread:
    Re: RAC Backup + Restore & Recover
    But I can find now this answer in this Thread!
    Can Levi or somebody else give me the answer again?
    Thank in advance
    hqt200475
    Edited by: hqt200475 on Mar 7, 2011 5:41 AM

    http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/admin.htm#CHDHFIGC says:
    >
    Oracle recommends that you do not use the default SPFILE names because all instances must use the same file and they all have different SIDs. Instead, store the SPFILE on Oracle ASM. If you store the SPFILE on a cluster file system, then use the following naming convention for the SPFILE: $ORACLE_HOME/dbs/spfiledb_unique_name.ora. Create a PFILE named $ORACLE_HOME/dbs/initsid.ora that contains the name SPFILE=ORACLE_HOME/dbs/spfiledb_unique_name.ora.

  • I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!

    I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!
    Partner Type
    Partner Type Desc
    Partner no
    Partner Name
    Partner Address 1
    Partner Address 2
    Partner Address 3
    Partner Address 4

    Hi Jyotirmoy ,
                        You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
    Sirish

  • Why do we need the @EJB annotation at the class level?

    Why do we need the @EJB annotation at the class level?
    Eg: Why do we need the first piece of code, when the second code seems much simpler .
    *1.*
    @Stateful
    @EJB(name="ejb/TradeLocalNm",
    beanInterface=TradeLocal.class)
    public class TradeClientBean implements TradeClientRemote {
    *2.*
    @Stateful
    public class TradeClientBean implements TradeClientRemote {
    @EJB private TradeLocal trd;
    }

    I think it is possible to do it in an aggregated level however you need to define your distribution rules in order to get the desired result, you need also to consider that if distribution rules changes and the value after promotional planning returns the same value, it is possible that detailed level are not realigned to the new distribution rule (e.g. regarding another ratio).
    Maybe this is one of several causes.
    Regards,
    Carlos

  • Need the TABLE where SALES TEXT of a material is stored

    I need the table where the sales text of a material is stored. This can be onbtained from MM03 --> SALES TEXT. Here we can pick it up from the language.I need the table where it is stored.

    Hi Gurpreet
    Please follow the below steps:
    1. Go to MM02.
    2. Select View: <b>Sales Text</b>
    3. When you are in the editor, use menupath: Goto->Header
    Here we can get the details of Text-ID, Text Name, Language, Text Object.
    Use these details for FM: READ_TEXT.
    We can retreive all text in the output of the FM.
    Hope this helps you.
    Kind Regards
    Eswar

  • I have os 10.4. Why do I need the mac box set to upgrade to snow leopard?

    I have os 10.4. Why do I need the mac box set to upgrade to snow leopard? What happens if I upgrade with just a 10.6 upgrade?

    ds store wrote:
    No iPhoto, iMovie, iDVD, Garageband, but I can pinch those off the 10.4 installer disk using Pacifist.
    You can usually get those from the original grey installer discs that came with your Mac without bothering with Pacifist. Look for an 'installed bundled software' or similarly named item on one of those discs, generally the #1 disc. Run that & the original versions of those apps that were bundled with your Mac will be installed. Software Update will let you know if there is an update you can download for them (but of course that won't include an upgrade to a more recent major version, which you would have to buy separately).

  • When and why do we need the object  'dimension' created by OWB

    Hi
    When we generate code for a dimension along with the ddl for the table
    a dimension object with a post fix of _DIM is being generated. Do we need to
    deploy this. Why do we require this and What is its impotance.
    May be this is a basic doubt but will be thanfull if someone can tell me its importance
    Thanks
    Nanda Kishore

    Nanda,
    A dimension object has built in definitions of a parent-child relationship between pairs of column sets ("levels" of the dimension hyerarchy). The optimizer uses these relationships with materialized views to perform query rewrite and thus makes the queries more efficient.
    For more details, please refer to the Oracle data warehousing guide:
    http://tahiti.oracle.com/pls/db92/db92.drilldown?levelnum=2&toplevel=a96520&method=FULL&chapters=0&book=&wildcards=1&preference=&expand_all=&verb=&word=dimension#a96520
    Regards:
    Igor

  • What am I doing wrong with the isNew() method?  and why do I need the other methods?

    I have coded an include jsp like this.
              <%@page language="Java"%>
              <%@page import="javax.servlet.http.HttpSession"%>
              <%!
              String iContextPath;
              String iCommonPath;
              String iImagesPath;
              %>
              <%
              iContextPath = request.getContextPath();
              iCommonPath = iContextPath + "/common";
              iImagesPath = iCommonPath + "/images";
              System.err.println(" here ");
              HttpSession thisSession = request.getSession( false );
              if( thisSession.isNew() ){
              System.err.println("isnew");
              response.sendRedirect( iContextPath + "/common/login.jsp" );
              %>
              Now I also have a redirect.jsp in the root of an application that contains
              this.
              <html>
              <body>
              <%
              System.err.println("Redirecting at this time from the root");
              response.sendRedirect( request.getContextPath() + "/secureArea/");
              %>
              </body>
              </html>
              And I have a logout.java servlet that looks like this.
              package com.pch.epics;
              import java.io.IOException;
              import javax.servlet.ServletException;
              import javax.servlet.http.HttpServlet;
              import javax.servlet.http.HttpServletRequest;
              import javax.servlet.http.HttpServletResponse;
              import weblogic.servlet.security.ServletAuthentication;
              public class Logout extends HttpServlet{
              private static final String CONTENT_TYPE = "text/html";
              //Initialize global variables
              public void init() throws ServletException{
              //Process the HTTP Get request
              public void doGet( HttpServletRequest request, HttpServletResponse
              response ) throws ServletException, IOException{
              String username = "";
              if( request.getUserPrincipal() == null ){
              username = "Unknown";
              } else {
              username = request.getUserPrincipal().getName();
              System.err.println( "ePics logging out '" + username + "'" );
              request.getSession( false ).invalidate();
              ServletAuthentication.logout( request );
              ServletAuthentication.invalidateAll( request );
              ServletAuthentication.killCookie( request );
              response.sendRedirect( request.getContextPath() );
              //Process the HTTP Post request
              public void doPost( HttpServletRequest request, HttpServletResponse
              response ) throws ServletException, IOException{
              doGet( request, response );
              //Clean up resources
              public void destroy(){
              First of all, why won't the isNew() report a new session in the server log?
              EVERY request coming in says it's an old request (ie it's not new). The
              J2EE Applications and BEA WebLogic Server book from BEA says this should
              work.
              My second question is why do I need to do those three lines from
              ServletAuthentication to logout a user? Ok, maybe I'm from the MS world,
              but that seems excessive, especially since I've already done a
              session.invalidate() right before it, but the bea docs say I'm required to
              do all four!
              

    When you invalidate a session. You invalidate the session of the web
              application that your jsp/servlet is part of. It is possible to have more
              than one web application on WLS and have them share a authentication info.
              While these applications share authentication they do not share their
              sessions so because of that calling session invalidate does not kill all the
              sessions. ServletAuthentication is needed to kill all the sessions and do a
              complete logout from WLS.
              "Flip" <[remove][email protected]> wrote in message
              news:[email protected]...
              > I have coded an include jsp like this.
              >
              > <%@page language="Java"%>
              > <%@page import="javax.servlet.http.HttpSession"%>
              > <%!
              > String iContextPath;
              > String iCommonPath;
              > String iImagesPath;
              > %>
              > <%
              > iContextPath = request.getContextPath();
              > iCommonPath = iContextPath + "/common";
              > iImagesPath = iCommonPath + "/images";
              >
              > System.err.println(" here ");
              > HttpSession thisSession = request.getSession( false );
              > if( thisSession.isNew() ){
              > System.err.println("isnew");
              > response.sendRedirect( iContextPath + "/common/login.jsp" );
              > }
              >
              > %>
              >
              > Now I also have a redirect.jsp in the root of an application that contains
              > this.
              > <html>
              > <body>
              > <%
              > System.err.println("Redirecting at this time from the root");
              > response.sendRedirect( request.getContextPath() + "/secureArea/");
              > %>
              > </body>
              > </html>
              >
              > And I have a logout.java servlet that looks like this.
              > package com.pch.epics;
              >
              > import java.io.IOException;
              > import javax.servlet.ServletException;
              > import javax.servlet.http.HttpServlet;
              > import javax.servlet.http.HttpServletRequest;
              > import javax.servlet.http.HttpServletResponse;
              > import weblogic.servlet.security.ServletAuthentication;
              >
              > public class Logout extends HttpServlet{
              > private static final String CONTENT_TYPE = "text/html";
              > //Initialize global variables
              > public void init() throws ServletException{
              > }
              >
              > //Process the HTTP Get request
              > public void doGet( HttpServletRequest request, HttpServletResponse
              > response ) throws ServletException, IOException{
              > String username = "";
              > if( request.getUserPrincipal() == null ){
              > username = "Unknown";
              > } else {
              > username = request.getUserPrincipal().getName();
              > }
              > System.err.println( "ePics logging out '" + username + "'" );
              > request.getSession( false ).invalidate();
              > ServletAuthentication.logout( request );
              > ServletAuthentication.invalidateAll( request );
              > ServletAuthentication.killCookie( request );
              > response.sendRedirect( request.getContextPath() );
              > }
              >
              > //Process the HTTP Post request
              > public void doPost( HttpServletRequest request, HttpServletResponse
              > response ) throws ServletException, IOException{
              > doGet( request, response );
              > }
              >
              > //Clean up resources
              > public void destroy(){
              > }
              > }
              >
              > First of all, why won't the isNew() report a new session in the server
              log?
              > EVERY request coming in says it's an old request (ie it's not new). The
              > J2EE Applications and BEA WebLogic Server book from BEA says this should
              > work.
              >
              > My second question is why do I need to do those three lines from
              > ServletAuthentication to logout a user? Ok, maybe I'm from the MS world,
              > but that seems excessive, especially since I've already done a
              > session.invalidate() right before it, but the bea docs say I'm required to
              > do all four!
              >
              >
              >
              

  • Why do we need the "Modify Date" column?

    The subject says it all.  Why do we need that column?  It just occupies real estate.

    I don't mean to be critical of you, Dave, but a "That's just the way it is" response leads to apathy, and apathy leads to junkware, and junkware leads to hate...
    Nobody needs the modification date to be on the screen.
    -Noel

  • BCALV_EDIT_03 - Need the table update function

    I am fairly new to OO programming and have worked through the various sample programs. I am currently using BCALV_EDIT_03 and _04 to write a table maintenance program.
    I kind of have figured out how the delete and insert function works but unfortunately in sample program _03 the final table update function is missing.
    What I am after is that I get all the changed records from the grid and update the external table just with those records.
    Could somebody post some sample update code that I could check out?
    Thanks in advance.
    Gerd

    Table update as in, database table update or ALV table update ?
    ALV Table update will be done automatically, in case you have used the method : set_table_for_first_display
    As you also quote that you are checking out BCALV_<b>EDIT</b>_03, I will just clarify this point, all changes made to the table are triggered by the EVENT DATA_CHANGED and this event has the necessary fields, from which you can come to know which rows and what values have changed. You need to use this DATA_CHANGED event and update your internal table. This is then shown in SET_TABLE_FOR_FIRST_DISPLAY in PBO.
    In case you are talking about database update and if it is a custom table, then you have to use the direct update.
    In case it is a SAP table, you might let us know which table it is, and probably some of the experts here can let you know the Function Module, BAPI or any method of a class to use.
    In case you need a good tutorial help, you can find it in Serdar Simsekler's
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/an easy reference for alv grid control.pdf
    Let me know if I am way tangent here or I could be of help to you.
    Regards,
    Subramanian V.

  • Why do i need the "Removeable Rechargable Li-Ion Battery" ?He

    Well, i couldn't find a store, where i could buy a new battery for my Zen Micro!! So why do i need this revmoveable battery(i dont have the "limited edition")..
    Thanks... (sorry for my English)

    You don't need to buy one, even if yours is not limited edition, your Zen Micro should have come with one "removeable rechargeable Li-Ion Battery". Did yours not come with a battery?

  • Need the table and field names...

    Hi
    Is there any field for min order quantity and lead time in vendor master related tables ? I want to generate a report to show that this vendor expects a min order quantity of this much and his delivery will take a minimum of n days/weeks etc ? So that based on that i can always be prepared for the delivery as well decide on the minimum qty to be ordered.
    In which table are these data stored and which fields refer them ?
    thanks

    Hi,
    Check the table LFM1(Vendor master record purchasing organization data).
    The default delivery time is stored in the field PLIFZ (Planned delivery time in days).
    There is no quantity field as such in vendor related information stored, its determined by the order placed by the vendor and the field VENSL(Vendor service level) stored in the LFM1 table.
    Hope this helps.
    Edited by: Priyabrata Samanta on Feb 15, 2008 2:58 AM

  • Need the table name

    Dear All,
    If we do some changes in purchasing document (PR, PO etc..) where does the data will be saved and how can we retry from the table.
    Functinally we can find this under the environment menu with Item changes.
    Rgds
    Srini

    hello,
    Check the following tables :
    EBAN Purchase Requisition
    EBKN Purchase Requisition Account Assignment
    EBUB Index for Stock Transport Requisitions for Material
    Logical databases: BAM, BKM, BBM
    EKAN Vendor Address: Purchasing Document
    EKBE History of Purchasing Document
    EKBZ History of Purchasing Document - Delivery Costs
    EKET Delivery Schedules
    EKKN Account Assignment in Purchasing Document
    EKKO Purchasing Document Header
    EKPO Purchasing Document Item
    EKPB "Material Provided" Item in Purchasing Document
    EKPV Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
    EINA Purchasing Info Record - General Data
    EINE Purchasing Info Record - Purchasing Organization Data
    EIPA Order Price History, Info Record
    EIKP Export/import header data
    EIPO Export/Import Item Data
    KONH Conditions (Header)
    KONP Conditions (Item)
    KONM Conditions (1 Dimensional Quantity Scales)
    KONW Conditions (1 Dimensional Value Scales)
    Logical databases: IFM, ILM
    Regards,
    Mansi.

Maybe you are looking for

  • Resolution and 3D issues with NVIDIA proprietary driver

    I bought a new PC recently and I installed Arch x86_64 on it. The hardware is the following: Intel Core i5 - Ivy Bridge, Quad Core, has integrated GPU EVGA GTX 660 Superclocked Asrock z77 Extreme 4 - Has UEFI 2x4 GB Corsair DDR3 I installed mesa, the

  • StringTokenizer

    I'm trying to learn about StringTokenizer and I have a few questions. 1) Can someone give me some good links to learn about the subject? 2) By the way, does anyone else find Suns documentation confusing? Or am I just not advanced enough? For example:

  • Jre1.5.0_06 doesnt support cjk?

    Hi I was trying to test for cjk (chines japanese koren) lang support but it seems the latest jre version had some problem as the same worked with earlier jre 1.4** versions .I found out that font.properties file in /lib for the jre version were less

  • Change sender email for submitted Form emails

    I built a website for a client using Muse and the Form widget through Business Catalyst. However, now whenever the client gets emails from a submitted form, it says its coming from MY email. How do I change the sender so that they recognize that it's

  • Some end hosts are missing!

    Hello. I'm using CiscoWorks LMS 4.0.1. For one subnet, User Tracking does not show IP address for some end hosts only (printers). All devices are supported, ARP table is populated. Ping sweep is enabled for all subnet. Any ideas? Regards. Andrea