Why does a finder window pop up when I open numbers?

Why does a finder window pop up when I open numbers?

New Document is one click in the lower left of the opening window!  You could write an AppleScript to avoid that one click, but that may not be worth the candle.
Note that after that one click you can save an additional click by specifying 'Use template:<your chosen template>' instead of 'Show Template Chooser' in Numbers > Preferences > General.

Similar Messages

  • Why does error code 4005 pop up when i try to restore my ipod 5?

    why does error code 4005 pop up when i try to restore my ipod 5?

    Have you tried this support article ?      http://support.apple.com/kb/ts3074

  • Why does my mac air always restart when I open it in our university?

    Why does my mac air always restart when I open it in our university?
    This has been always bothering me for some time already. Whenever I open my macbook air in our university it always warns me to restart my device. When I do the same thing happens over and over again until it reached 27 reports.

    I'd make a sound too if i was put into a bag haha.
    Only thing i could think of it it has a mind of its own or your putting your computer to sleep. Try shutting down your mac before placing in your bag and see if that changes things.

  • Why does a Finder window open when I start my computer?

    It's been doing this for a while, and I find it highly annoying. If I want a Finder window, I'll open one. I believe it began with Lion. I have looked in the Finder preferences and system preferences to try to disable this, but I see no option to do it. How can I make this unwanted behavior stop?

    Be sure that you have closed any Finder window before shutting down. Any windows left open will re-open when you restart.
    Also check in your Login Items in Users & Groups Preferences.
    In which directory does the Finder window open?
    Lastly, check your system logs for an explanation. They should show why it is opening. Usually it is some other program that starts on boot and requires the Finder to open.

  • Why do multiple Download windows pop up when I download a PDF or other file?

    Everytime I try to download a file (PDF, JPG, DOC) that was attached to an email (I am using Outlook WebMail) the document will download fine HOWEVER eight (8!!!) or more Download windows pop up as if I tried to download that file eight (or more) times.
    So then I have to "X" out of each window after downloading one file. It is the same file listed on each popup window.
    Since this is a new problem I tried shutting down the computer and restart but not successful.
    Firefox 26.0
    Any help...PLEASE!?!?!?

    THANKS Waka_Flocka_Flame!!!
    (I pressed the "Problem Solved" button however it did not give me a chance to type anything so I found the thread and pressed "Reply")
    Anyhoo...I went to Safe Mode and Firefox worked great. Went back to regular mode and again multiple Download windows when trying to download a file.
    I then did as you suggested and poked around in the Add Ons and there was something called Download Manager Tweak that was upgraded last week and that was when the problems started. I got rid of it and my Downloads are working great.

  • Why does my finder display differently every time I open it

    When I open Finder, it always opens it to a different size with different column widths that what I set. Can someone please help me understand how to save my settings so that I don't have to resize every time?
    I don't want it like this
    I want it like this, and I always resize but it doesn't always reopen like that the next time I open Finder

    Do a backup. 
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.finder.plist.  Move the .plist to your desktop.
    Re-launch Finder by restarting the computer and test. If it works okay, delete the plist from the desktop.
    If the same, return the .plist to where you got it  from, overwriting the newer one.
    Thanks to leonie for some information contained in this. 

  • Why does my blog not refresh itself when I open a new browser page?

    I add a new post to my blog. Sometimes it shows up in the browser. I close the browser, maybe....Today it has been about five days since I wrote a post. It still does not show up when I open my browser in Firefox. How do I refresh the browser? What should I do?

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Firefox > Preferences > Privacy > Cookies: "Show Cookies"

  • Why does my Bookmark Toolbar appear blank when I open Firefox 8.x but is filled after unclicking that toolbar in View and reclicking?

    When I open Firefox, the Bookmark toolbar is there but a solid gray. I can restore the icons by clicking View, Toolbars, Bookmar to unselect the Bookmark toolbar, and then repeat the process to select the Bookmark toolbar. This is an annoyance repeated every time I open Firefox. How do I get out of this loop and just have the Toolbar appear populated with icons automatically?

    Have you done any customization to the Bookmarks Toolbar? Like adding Spaces or a Flexible Space to the Bookmarks Toolbar. <br />
    Does an overflow chevron >> appear on the right-side of the Bookmarks Toolbar?
    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • HELP, why does saved image look too sharp when re-opened in Photoshop but normal in Windows viewer?

    Been using Photoshop Elements 7 for several years and this has never happened before!  I applied sharpening to an image and saved two copies: PSD and JPEG.  When I re-opened the PSD file it looked WAY over-sharpened.  In Photoshop Editor I then opened the JPEG and it too looked way over-sharpened.  But the strange thing is that when I view the JPEG in the Windows Photo Viewer it looks normal!  Just as it did when I originally saved it.   I decided to try an experiment.  I opened the PSD file that now appears overly sharpened and saved a new JPEG.  I then opened the new JPEG in Windows Photo Viewer -- and it looks normal, even though it was saved from the PSD file that looks over-sharp!  I then opened the same, newly saved JPEG in Photoshop -- and it now looks oversharp and distorted, just like the PSD file.  Can anyone tell me what is going on here?  I'm completely confused!  Hope someone can help me figure this out.  Thanks!

    The over sharpening may have caused a color shift.
    You might have better luck using the adjust sharpness command. Enhance<Adjust Sharpness.
    Skip down to "Precisely sharpen an image" on the help page listed below for info on adjust sharpness command.
    http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSAC75B090-7431-4b74-B4DC-C5B02EBC4C BF.html
    Here are a handful of links which might be of use about USM.
    Note: You will not be able to do the manual USM segment in the above article as Photoshop Elements does not include the Apply Image Command. It does give some start settings to try out.
    http://www.photokaboom.com/photography/learn/Photoshop_Elements/sharpening/USM_2_amount_ra dius_threshold.htm
    USM for haze removal added as it can be a useful thing to know:
    Several sharpening methods discussed including highpass sharpening.
    http://www.photokaboom.com/photography/learn/Photoshop_Elements/sharpening/1_sharpening_in troduction.htm
    Highpass sharpening:

  • Using OSX 10.9.4.  Why does the Finder Menu bar disappear when using Chrome?

    I've used Chrome for a couple years, and all of a sudden the Dock and the Finder Menu bar are not accessible when using Chrome.  They are present in every other app, as usual.  Please help me to get the Finder Menu and Dock active when using Chrome.  Thank you.

    Chrome may somehow be set to run in full-screen mode. I don't use Chrome so can't check its settings options, but try hitting ESC when Chrome is doing this and see if you get the menubar and Dock to reappear.
    OS X Mavericks: Take apps full screen

  • Why does the browser window change colour when I bookmark a page or click the Downloads button?

    Using Firefox 20 on MacOS - when I click the Downloads button or Cmd-D to bookmark a page, the browser window changes from looking like this:
    to looking like this:
    Any thoughts would be welcome.

    Hi there,
    Wow, that looks odd! I have no idea why that would happen, but I wonder if it's related to one of the add-ons you have installed? I see a red icon in the status bar that I'm not familiar with, which leads me to believe that you may have other add-ons installed. One thing to try is to start Firefox Firefox with add-ons disabled (you can do this from the Help menu). If you don't see this problem in that mode, the issue is caused by one of the add-ons. From the Tools menu, you can access the add-ons and disable them one by one. Remember to restart each time and then test it out.
    If none of that takes care of this, my other suggestion would be Firefox Reset: [[Reset Firefox – easily fix most problems]]
    Hope any of this helps.

  • Why does apple application support pop up when trying to play Itunes?

    Hello out there, I need help with my Itunes. Went to Itunes and a message popped up stating "Apple Application Support not found. It is needed to run Itunes.
    Windows Error2.   Why is this happening, have played Itunes in the past.  I have uninstalled and reinstalled and same message pops up .I am using a HP PC.

    Have you tried this support article ?      http://support.apple.com/kb/ts3074

  • Why does the typing cursor pop up when I click somewhere on a page.

    Whenever I click on text on a web page the typing cursor pops up like I can type something into the page, but when I press a key nothing happens. So I am wondering how can I stop this from coming up because it really annoys me. Picture of what I mean can be found here: http://img543.imageshack.us/img543/4818/cursor1.png AND HERE: http://img209.imageshack.us/img209/9081/cursor2.png

    IT WORKS !
    Tools > Options > Advanced : General: Accessibility:
    [ ] "Always use the cursor keys to navigate within pages"
    Uncheck Always use the cursor keys to navigate within pages
    Thanks cor-el
    No need to reset anything...

  • Why does username/password combination pop up when trying to send pics from iphoto

    Help!! I'm trying to send email photos from iphoto, but 'won't recognize username/password keeps coming up... I've even changed my info, and I know its' correct because I checked it with my email...

    Your specified email server — or the username or password, as the message states — appears to be incorrect.  iPhoto shares its email accounts with Mail.app, and these accounts are visible in iPhoto using the Accounts section of Preferences.  Does sending mail with Mail.app work with the same server iPhoto is using?

  • Why does Premiere Pro CS 6 hang when option opening bins, clip to sequence, etc?

    I am having an issue with Premiere Pro CS6 performing a few commands:
    -     Option Clicking Bins to open them
    -     Duplicating Sequences
    -     Performing Clip to Sequence
    -     Creating Sequence: File → New → Seq
    I am not having these issues (the system does not hang) when loading shots, Match-framing, watching dailies, etc in my source monitor or watching the assembly.  Everything works fine when actually cutting, trimming, inserting, etc.  Cutting in the timeline is actually a pleasure – fast and very responsive.
    The problem only happens when I’m in bins.
    My project is rather large – about 49.9MB, with over 100 folders and bins (it is a feature).
    I have tested these commands with smaller projects – importing a sequence from the current "hanging" project into a new project  - and everything is working fine with the small project of that one sequence and consolidated clips from the sequence.
    I originally thought it as a RAW issue (I had 8GB).  When I installed another 8GB of RAM for a total of 16GB the issue stopped and I have been editing fine for the last few days.
    However yesterday the issue started again – it hangs on the commands listed above (Mac’s spinning wheel).   The operation is usually completed successfully however it can take up anywhere from five to ten minutes before the sequence is duplicated or the bin opens (option clicking), etc.  
    Again, from what I’ve gathered it does not happen with smaller projects – with less bins, footage, clips, etc. but only with this rather large project – with many daily bins, sequence bins, etc. 
    My system spec. are:
    MacPro 1,1 - OS X 10.6.8
    2 x 2.66 GHz Dual-Core Intel Xeon
    16GB 667 MHz DDR2 FB-DIMM
    The media that I’m cutting is ProRes (transcoded from Epic RED footage).
    I'm wondering if this issue is hardware-related or Premiere Pro CS6-related.
    Any help would be much appreciated!
    Thank you,

    "Devenum.dll"  Change your rendering engine from GPU to software.  Project Settings, General, Video Rendering and Playback.  See if that helps.

Maybe you are looking for

  • Can't get around "mount failed" - "on error" won't do it - help appreciated

    Hi I'm using this syntax to mount a volume, and it works well if the volume can in fact be mounted: try mount volume "afp://username:[email protected]/MyDir" on error display dialog "blah blah" end try BUT, if the volume can't be mounted because the

  • Saving a document using Word 2010 into a managed metadat hierarchy

    Hi Can I save a document using Word 2010 into a document library that has a managed metadata hierarchy and the document appear in the correct place in the hierarchy ? Ideally it would be good if the Word 2010 "Save As" browser would show the managed

  • Two sided masterpages in InDesign

    I am designing personalized mailers for a client that needs to be double sided. How can I create a master page for both the front and the back of the mailer in InDesign 5 or 6 so if I safe the pdf my file would consist of the front and back pages col

  • Validation before running test script?

    Hello Gurus, I am getting started to learn eCATT and with different posts availabe I was sucessfully able to create and execute simple scripts. Thanks for posting all this and I am now able to create all four objects in eCATT. A special thanks to Sap

  • Need to trigger InputProcessor after user login

    Hello All, We have a workflow where we need to display some data in a portlet (list of catalogs which user has access to). This data should be visible when the portlet gets displayed. We have an InputProcessor which retrieves this data. The question