Why does a grouped image disappear when I ungroup it?

Why does a grouped image disappear when I ungroup it?

There are bugs hanging around for version after version after version. Hopefully it gets fixed but nobody knows when or if a bug will get fixed until it is.

Similar Messages

  • Why does my cropped image disappear?

    After importing a jpeg file into my pages document, I have tried repeatedly to crop ("mask") the unwanted portions of the image. When I am finished applying the mask, I have double-clicked on the image--exactly as the "help" page instructs--and the image completely disappears, leaving only the masked portion. I have tried double-clicking on the image, on the mask, on an area outside of the image and mask, and on the "edit" symbol below the mask. Every time the image disappears. What am I doing wrong?

    If you have masked it:
    Menu > Format > Mask with Shape > Choose
    don't you expect that the masked area is all that you will see when you are finished?
    There are several selections in the masking:
    1. The mask (Shape) itself, clicking on the mask handles you can size it
    2. The image which may or may not extend outside the mask. Clicking outside the mask, you get a grabber hand and can drag the image around inside the mask or resize it from the images handles
    3. The cropped image dragging on the corners or sides resizes the mask & the contents
    Clicking away from the image, sets the last edit.
    Possibly the image is very large and you are only seeing a tiny portion of it, say a corner.
    Have you clicked on the little and big icons in the Edit bar to rescale it as necessary?
    Peter

  • HT3737 Why does the Safari toolbar disappear when the cursor is not on it ?

    Why does the Safari tool bar disappear when the cursor is not pointed to it?
    How can I fix it ,Please.

    It sounds like Safari is displaying in 'full-screen'. To reveal the tool bar move the mouse pointer to the top right-hand corner of the screen. You should see two blue arrows, click on those and it should take it out of full-screen mode and leave the menu bar, tool bar, etc. permanently on view.

  • Why does tooltip-called image flicker when it is over the trigger?

    Using a tooltip to present an image works fine when the resulting image stays away from the trigger location, e.g. offset down and to the right.  If the image is nearly full-screen, it covers the trigger location and flickers rapidly, occasionally setting after a while, but only for a moment.  Same for a small text box, if the trigger is near bottom-right on the screen, causing the tooltip content to display over the trigger site.  Any ideas to stabilize the image/text when over the trigger?

    Remove the dimensions in the following
    <div class="tooltipContent" id="sprytooltip11">  <img src="pix/1-pp-all-490x480.jpg" width="850" height="750" /></div>
    Gramps

  • Why does my email signature disappear when i send pictures?

    i am having issuer with sending pictutres via email.
    if i use the insert image i can only select a single image at a time ... slow..
    so to avoid this time waste i go to pictures, select the images i want and click share via mail option
    and the images appear along with my signature line.
    when the mail is recieved my signature has disappeared.
    why?
    kenny

    This is the step that I took after inputting my signature.
    On the right, after saving my document, I click "Get Others to Sign."  I was confused because it says that it's powered by EchoSign.  Like I stated before, my clients are able to sign this document when I send it to them, but it is returned to me with their signature (not in the signature field, but at the end of the document), and my signature is missing.  I tested this on myself - my signature is missing when they receive it. 

  • Why does the revealed image flicker when using the Show/Hide feature?

    I started using the Show/Hide Button and Forms function in InDesign CS6 and have had some peculiar things happen. I was mocking up some samples and on the swf version if you hover over the left side of the blue rectangle all is fine but if you move to the right side of the blue rectangle the image starts to flicker. When you hover over the red rectangle the pop-up image just flickers constantly. I guess there must be some issue with having the button for a revealed image under some portion of the revealed image. See: http://www.idugsf.com/_a/FI_BookSamples.html .
    The problem went away when the button and the revealed image did not overlap.
    This problem didn't occur with another file I had originally created in CS5.
    On the pdf version the buttons which are on their own layer behind the revealed image moved to the front in the pdf: http://www.idugsf.com/_a/FI_BookSamples.pdf
    [email protected]

    Remove the dimensions in the following
    <div class="tooltipContent" id="sprytooltip11">  <img src="pix/1-pp-all-490x480.jpg" width="850" height="750" /></div>
    Gramps

  • Why does my mouse pointer disappears when hovering over Firefox?

    When I'm over the Firefox window, my mouse pointer disappears, unless I'm typing or actively using my mouse.
    == This happened ==
    Every time Firefox opened
    == This morning after updating to the latest version, but before I had restarted Firefox to fully install the new version.

    it seems that flash player is causing this problem because when i disable it, everything is fine. i even tried to install older versions of flash player (9.+) but pointer still starts to disappear. i'm using Windows XP. it happens on the both of my computers and it started at the same time (during the last week) i don't know what to do next..
    thank you in advance

  • Why does color of image change when imported to Photoshop

    When I import or edit my Lightroom image into Photoshop the color tones of the image change to a darker tone.
    I'm using the same screen.
    What can I do to correct this?

    Thanks for both responses .
    I tried changing the export settings but still get a different color image rom the one I get in Lightroom.
    Also, the monitor was recently callbrated, so could the answer be in PHOTOSHOP's color management settings?
    When I checked PS's Color Settings window the " Working Spaces" setting was at  "sRGB"...
    and
    Color Management Policies @ "Preserve Embedded Profiles
    My first export from LR was also @ sRGB.
    Any thoughts on some common settings that might put this right?
    Thanks again.

  • Why does Mozilla minimize or disappear when it freezes?

    This happened since I upgraded to the newer version of Mozilla late last year. It still does it with the latest version of now 19.0.
    When Mozilla has a deep freeze, not just a temporary freeze, the page will minimize itself. I can still see it in my task panel but it stays minimized until it's unfrozen. Can take 30 seconds to a full minute to un-minimize. Is this normal behavior or not?

    Check whether your plugins are updated!
    Remove unwanted plugins and give a try.
    Check in safe mode
    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Why does wi-fi signal disappear when I create a dual band network?

    I have an Airport Express (4th Generation), and I am trying to setup a dual-band network. My wife has a new 15" MacBook Pro and I am running a iMac (Version 7,1), which I purchased in March 2008. From what I have researched, I should be able to run a dual-band network; however, as soon as I set up the 5GHz network, my iMac loses wi-fi and I cannot join my network even though it appears in the wi-fi status in the menu bar (the MacBook Pro is just fine). Am I doing something wrong or is my iMac simply not compatible?

    Are you trying to join your iMac to the 5GHz band or the 2.4GHz band? The problem may be that the 5GHz band does not transmit well through thick walls and it might not be reaching your iMac with a good enough signal strength. As far as I am aware the 2008 iMac does support 5GHz connectivity however someone else might know better.
    Try joining the 2.4GHz network and see if that helps.

  • Why does the "Junk" button disappear when I have multiple e-mails selected?

    Very annoying! First thing I do when I open my e-mail is to multi-select all of the junk... and then I have to right-click - could the button just stay put???
    THANKS!
    m.s.

    Can you make a screenshot to show where this button is?
    https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem
    AFAIK, Thunderbird doesn't have a native Junk button. The one I use was put there by the Junquilla add-on.

  • Why does my electronic signature disappear when I send document to be signed by client

    I converted a word document into PDF.  I edited this document, added form fields for client to fill out.  I need to be able to add both my and my client's signatures.  I first tried to add my own digital signature, but it would not allow me to send it to my client properly because it was being read as already signed; they were not able to fill any fields.  I then added 2 digital signature areas enabling echosign, one for me to sign and one for them to sign.  I successfully added my signature:
    Saved this document, uploaded it to echosign and successfully sent to my client.  My client signed, but the PDF I received back only has her signature; and her signature is at the bottom, not on the signature line as the screen shot previously with my signature.
    Signature is at the end of contract with the certificate of signature on the following page.  I'm not posting the screenshot as it shares personal information of my client. 
    Help would be appreciated.  I just need to understand how to enter my signature along with their so that we are both bound to the agreement.  Otherwise I am still wet signing, which kind of defeats the whole purpose.
    Thank you - Jenn

    This is the step that I took after inputting my signature.
    On the right, after saving my document, I click "Get Others to Sign."  I was confused because it says that it's powered by EchoSign.  Like I stated before, my clients are able to sign this document when I send it to them, but it is returned to me with their signature (not in the signature field, but at the end of the document), and my signature is missing.  I tested this on myself - my signature is missing when they receive it. 

  • Why does my leading zero disappear

    I have created a 4 number field.  Why does my leading zero disappear when moving onto the next field.  How can I correct this?
    Thanks.

    The definition for a field formatted with the "Number" format is to hide the leading zeros.
    Have you tried to access the value of the field in JavaScript using the "valueAsString" property and have the field use a format of  "None"?
    This is how the SSN and U.S. Postal Zip Codes need to be handled to display the leading zeros.

  • Why does my RAW image look grainy when I export it in to Photoshop CC from Lightroom for editing?

    Why does my RAW image look grainy when I export it in to Photoshop CC from Lightroom for editing?
    Checked LR's setting for Ps export and they haven't changed since it was OK a few days ago? It is OK if you zoom in but in 'fit page' it looks terrible!

    I have exactly the same problem and it has got worse today as the photos also now open in smaller windows for some reason

  • In Premiere Pro CC 2014, the image disappears when I apply a mask of an effect. Why?

    In Premiere Pro CC 2014, the image disappears when I apply a mask of an effect. Why?

    Nevermind...
    Fixe:
    projects setting > switch Renderer.
    Thanks

Maybe you are looking for