Why does multi-machine rendering work so poorly?

more specifically, watch folder rendering with multi-machines is pointless because skipping a frame seeming to take as long as rendering the frame, so one machine can never catch up to the other.  why does skipping a frame take some long?  i mean it's been in the software for like 10 years. is this not considered important?

These two features are not intended to be used together.
Render Multiple Frames Simultaneously multiprocessing is intended to turn a single computer into a self-contained render farm of sorts. Multi-machine rendering is intended to use multiple computers in a render farm. Attempting to use these two items together is mixing two different organizational schemes for managing the rendering of frames.

Similar Messages

  • Why does Time Machine not work over wifi but only via ethernet cable ?

    Hi everyone,
    It's been some time I have this problem now.
    The first time I backed up my mac within Time Capsule with time machine, I chose to use the ethernet cable because the gigabit connection is much faster than the wifi for the first back up, but now, any time I want to update this back up, I need to connect the cable, cause "Time Machine can not connect to the Drive I picked" over wifi.
    This is so annoying. Does anyone have a similar issue ?
    Any solution ?
    When I got this "error" I can use Utility Airport and get full access to the drive, even in finder. The only thing that doesn't work is TimeMachine connecting to the drive, even if it is detected by TimeMachine itself.
    Thanks.
    Riccardo

    Typical Yosemite.
    I suggest a full reconfigure of the TC.
    Follow this list..
    No files are deleted on the TC doing this although you might have to repoint your laptop to the backup.
    Note.. even if TM does connect it will say it is going to do a new backup.. it is only when it starts that it discovers the backup exists and increments it.
    Start from a factory reset. No files are lost on the hard disk doing this.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 for basestation and and TCwifi wireless name.
    If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
    2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
    Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Why does time machine not work?

    First time machine was continually backing up, or not. Icon wouldn't respond. Started up on my Snow Leopard disk and it supposedly fixed the problem with disk utility. Now it will open time machine, but it doesn't work. I can't get a responce from the callender ot arrows. Then I have to command, option, esc to get out. Any help? It's 10.6.8.

    http://pondini.org/TM/Troubleshooting.html

  • Why does everyone at my work loose their internet connection when I update Adobe Cloud Products?

    Why does everyone at my work loose their internet connection when I update Adobe Cloud Products? We are on a 20mb broadband connection and there is around 20 people using computers at my work but when I start my Adobe Cloud Product update or when I try and download my Adobe Cloud Product everyone at my work looses their internet connection and so do I. But the update keeps downloading and installing.

    I am sorry FooWingLi but the difficulties you are describing sounds more like a local network configuration issue.  I would recommend working with your I.T. department to investigate this matter.

  • Why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

    why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

    IE uses a different version of Flash than other browsers use. You need to install the Plugin version of Flash for Firefox.
    1.Download the Flash setup file from here: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
    3. Then run the Flash setup file from your Desktop.

  • Why does my iMessage not work even with my apple ID signed in?

    Why does my iMessage not work even with my apple ID signed in?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • Why does flash player not work with facebook?

    Why does flash player not work with fcebook?  Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player.  When I go check which version I have, I always get the message that I have the most current one.  I run Mozilla Firefox with Windows.  I don't know anything else.
    Message was edited by: khettich

    This means you don't have the latest version installed.  Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

  • Why does Java Application not working with Macromedia Flash 5 or MX?

    Why does Java Application not working with Macromedia Flash 5 or MX?

    Who says they don't?
    Although I don't know much about those I'd think they should be able to talk to Java Aps using Sockets or request Servlets ...
    Spieler

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

  • Why Does Dynamic Link Not Work

    I purchased the CS5 Adobe Production Premium.  I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere.  When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
    Adobe Dynamic Link Requires Adobe Production Premium.
    Since I own production premium, I do not know why I am getting this message.  I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message.  What can I do to get Dynamic Link Working.

    Thank you for the tip.  Could you possibly tell me how to deactivate and
    then reactivate the suite.  I am using a Macbook Pro laptop running OS
    10.6.4.  I do not even know where to start.
    From:   Colin Brougham <[email protected]>
    To:     Dan Seanor <[email protected]>
    Date:   03/15/2011 09:55 AM
    Subject:        Why Does Dynamic Link Not Work
    Deactivate the software (not uninstall), and then reactivate the suite.
    This often fixes this. You can opt to leave the serial number on the
    system; no need to clear it and re-enter it.

  • Why does my MacBook stop working when I tr to plug in my iPad to do some file syncing?

    Why does my MacBook stop working when I try to plug in my iPad to do some file syncing? This is the second time I have had it happen to my MacBook. The computer just shuts down and cannot be restarted. When I plug it into the charger I get a faint Green light where it plugs into the MacBook. When I took the computer into my local Mac store last time this happened (Nov 2012) they reckoned they couldn't find anything wrong with it. Has any body else encountered a similar issue?

    That would be a filter, yes. Didn't know Verizon handed out phone/DSL wall split filters. I would honestly take a look at the physical jack it is connected to for corrosion or lose connections as I doubt the filter is bad out of the box. Anyways, what was the original problem you had with the Phone and DSL that prompted Verizon to send out a filter?
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Why does AirPort Extreme stop working when I plug in a USB hard drive?

    Why does Airport Extreme stop working when I plug in a USB hard drive?  The USB drive has its own power supply.  I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

    The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
    Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
    Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

  • Why does my ipad air work with my netgear routerWGT624

    why does my ipad air work with my netgear routerWGT 624

    Why wouldn't it work with that router?
    Or are you really asking why doesn't it work with that router? If that's your question try rebooting the router by powering it off for thirty seconds then turning it back on.
    If this doesn't help please explain in more detail what happens when your iPad attempt to connect to your Wi-Fi network.

  • HT4993 why does my internet not work when not connected to wifi?

    why does my internet not work when not connected to wifi

    Hi farmgirl0812,
    Thanks for using Apple Support Communities.  This article has steps to try if you are unable to connect to a cellular network:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Ari

Maybe you are looking for

  • How can I transfer a docx calendar to my iPhone calendar

    I just received a word document calendar that I would like to transfer into my iPhone's calendar. Could anyone help with this process

  • IMac & ADC display

    I have an older Apple LCD display with the ADC connector, which I can use with my (even older) PowerMac. It's a great monitor, and I'd hate to have it just sit around when I upgrade...hopefully to an iMac. I know there are connectors for mini-DVI to

  • Function module to get material serial number status

    Hi Gurus, How to get get material serial number status? Is there any function module? TCode IQ03 to display the serial number staus, but where i can find the status (AVLB / ESTO / ECUS) of these serial number ? Pls help. Regards, Sankaran

  • Heading level tag in mini-TOC

    Is there a way to change the tags used in the mini-TOC for TC3? My docs are linked from FrameMaker and they don't use Heading 1, Heading 2, etc, so this handy tool is not working for me. Thanks for any help!

  • Can i install adobe digital editions on my dell venue 7 android tablet?

    I have managed to install ADE on my PC but am having problems with my venue 7 tablet. It downloads but when i ask it to install it asks me to use either PDF or Mobi reader and that won't work. Is it even possible?