Why does my itouch,after i restored it with itunes, it turned of and kept turning on to the apple and it still doing that?

why does my itouch,after i restored it with itunes, it turned of and kept turning on to the apple and it still doing that?

Sounds like a hardware issue. Have it serviced if it's in warranty.
Basic troubleshooting steps  
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Similar Messages

  • I have had my Iphone 5s for 2 months and all the fotos and data (fotos and data were not backed up) that I had were erased after I restored it with my old Iphone 4s backup, can I get my unsaved fotos and data back? and if I can, how?

    I have had my Iphone 5s for 2 months and all the fotos and data (fotos and data were not backed up) that I had were erased after I restored it with my old Iphone 4s backup, can I get my unsaved fotos and data back? and if I can, how?

    If you never backed up your phone to iTunes and never backed it up to iCloud all of your content is gone forever.

  • After installing it, my macbook would not restart. All i would see is the Apple and the twirling circle. To get back to be able to use internet i had to put Snow Leopard disc holding "C" key.

    I did a software update check. It showed to update to 10.6.8v1.1. After installing it, my MacBook would not restart.
    I have tried this more than once. After the install all that happens is i get the Apple emblem and the twirling circle. I have let that go for literaly a couple hours with no results.
    To get to be able to use my Macbook i have had to install Snow Leopard by holding the C" key and re-installing Snow Leopard.
    Any help would be appreciated.  i Have purchased "Lion" and cant access App Store to install until this update is done.
    Very frustrating.
    thanks in advance.

    That's why you can't access the App Store. Minimum requirement is v10.6.6
    Install this combo update >  Mac OS X 10.6.8 Update Combo
    Then restart your Mac, open the App Store.
    You can download Lion by clicking Redeem under Quick Links right side of the App Store window then entering the redemption code.
    You have checked to make sure your Mac can run v10.7 Lion?  >>>> OS X Lion - Technical Specifications

  • TS2972 WHY IS MY HOME SHARING SHUT DOWN AFTER 5 MIN WHEN WATCHING A MOVIE. I DOWNLOADED LATEST VERSION FROM THE APPLE SITE. STILL DOES NOT WORK.

    home sharing shuts down after 5 min when watching a movie. any solutions. already downloaded itunes from apple. did not work.

    Make sure your computer is not set to fall asleep. Also check www.istumbler.net (netstumbler for windows) for interference on the network

  • HT201210 i`m trying to update my new iphon with itune. i got a worning no.14 .then i updated apple and tried again but got a massege "iphone not found".all the time there is a serial no. but it says that there is no iphone no.  what am i doing wrong?

    I am trying to update my new iphon 4.at first i got a massege no.14. then i updated apple &tried again but this time got a massege no iphon found. serial no.appears but not a phone no.what should i do?

    Sounds like it's hardware issue. The iPhone warranty is based in the original country of purchase. Since it was bought in Korea you will need to ship the phone to someone you know in Korea to be taken in and then they will have to ship it back to you. The cost of shipping will be at your expense.

  • I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

    I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

    Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

  • My camera does not work after I restored the system, how can I use it again?

    My camera does not work after I restored the system, how can I use it again?
    Thank you for your help!

    Did try to restore "as new device" without using the backup after that?
    Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

  • HT1339 In stage 9 my iTouch shows the apple and a stuck progress bar showing about 10% completion.  This after 1/2 hour.  What now?

    In stage 9 of Restore my iTouch shows the apple and a stuck progress bar showing about 10% completion.  This after 1/2 hour.  What now?

    Refresh my memory as to what stage 9 is? Does the staus bar say anything else?
    Maybe this:
    Hang during restore process
    Following Troubleshooting security software will frequently resolve this issue. This issue can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
    There are two ways to resolve this:
    You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
    For Windows XP, Windows Vista, Windows 7: Go to the C:\Windows folder and launch regedit.
    Go to Edit > Find.
    Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
    Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
    Delete the "TcpWindowSize" entry.
    Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
    Close Regedit, restart the PC, and test.
    If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
    If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.

  • After updating my Iphone 4s to os 7.1.1 ota, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset! My phone has the itunes logo and charger symbol on it .

    After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    kevinpowell1 wrote:
    how can i get it out of recovery mode?
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have, it conects to my itunes and computer, but just won't get passed the logo..what can i do? :/

    I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have been successful. It connects and is recognised by my itunes and computer, but still after restoring it, it just won't get passed the logo..what can i do? what is the problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • After formatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes.

    After reformatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes. When connected to iTunes, it sees it in the restore mode and also asks to restore the iPod. It happens over and over for the last months. What could be the problem?
    iPod Classic 80Gig.
    Thanks in advance.

    Dear planb77
    Thanks for a reply. iPod does not support ntfs - you're right. that means it will never work on that. While restoring ipod using iTunes, itunes reformats it no matter what filesystem is there. So the issue is not that. ipod is now on fat32 and it works for a certain period of time, but then crashes and asks to restore through itunes. Resetting/restarting does not help.

  • While doing a non-iTunes upgrade to 8.02 my iPad froze on the apple screen. After hours of waiting I forced a power off. Froze in same place. Tried attaching to iTunes on PC from power off. Freezing in same place. Any ideas?

    While doing a non-iTunes upgrade to 8.02 my iPad froze on the apple screen. After hours of waiting I forced a power off. Froze in same place. Tried attaching to iTunes on PC from power off. Freezing in same place. Any ideas on how to get past this so that I can at least run a restore?

    I Don't know that recovery mode would work, but did you try it?
    If you can't update or restore your iPhone, iPad, or iPod touch
    IF that fails, have you considered erasing the device using Find my iPhone in iCloud.com? I'm not sure what good that would do either of the iPad continues to freeze, but if nothing else is working .....

  • HT201210 my phone won't turn on after trying to restore it with iTunes what do i do??!! also it just has the blue music app with an arrow and power cord on it. HELP!

    My phone will NOT turn back on after trying to restore it with itunes. It just has the blue music app with an arrow & the usb side of the power cord on it.
    Help me please!!

    Hello Sean,
    It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
    iPhone Repair - Other Repairs
    https://www.apple.com/support/iphone/repair/other/
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
    Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

  • TS1814 i wana restore my iphone 3g but when i restore it with itunes after some time is say  '' iphone could not restored unknow error 1015 '' help me please

    i wana restore my iphone 3g but when i restore it with itunes after some time is say  '' iphone could not restored unknow error 1015 '' help me please

    99% because your iPhone was hacked/jailbroken. We cannot help you, see terms of use.
    Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

Maybe you are looking for

  • Getting error while uploading a document in a library

    Hi, I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times. It reads: The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp> How to resolve th

  • Time Capsule and Windows 7 clear approach

    Hello all, I tried now for one month to install the Time Capsule (with Airport and Bonjour software) with Windows 7 WIRED. First I had to turn on the Net-Bios, which is difficult to find. I did. The Time Capsule was visible in the Windows File system

  • HotSpot not working correctly

    Hi: I'm installing Websphere Application Server 4.1 in Sun Solaris version 9 (5.9), I have preinstall Java version : java version "1.4.0_00" Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0_00-b05) Java HotSpot(TM) Client VM (build 1.4.0

  • Additional system roles in SOLAR01/SOLAR02

    Hello, Is it possible by customizing or something else, to have more than the Dev/Qas/Prod system roles selectible in SOLAR01 and SOLAR02 ? I have logical components where there are other types of systems, and I would like to use them in my Blueprint

  • After updating from v.27.0a1 to v.28.0a1, it crashes on Startup (appcrash)

    Hello, After updating my Firefox Nightly from version 27.0a1 to version 28.0a1 the application is not launching anymore. I receive a APPCRASH Error with following Information (unfortunately in German): Problemereignisname: APPCRASH Anwendungsname: fi