Why does my mac reboot on its own?

Why does my mac reboot on its own?

Oh den.thed...  I saw your post this morning and I was so excited....  ran to the Mac and got to Energy Saver, and...  the checkbox is already unchecked. 
Long story, I'll make it short.  Just got the Mac back after having the HDD replaced.  (It stopped working after less than 500 hours.)  This rebooting thing has been happening ever since I got the computer in 2010, and I was hoping it would coincidentally stop happening after having this crashed HDD replaced last week.  No such luck.  Still doing it, even after getting the computer back from Apple.  Two of my kids have macbooks, have used the cr*p out of them, and have had very few problems (nothing big).  I bought this Mac, to replace a dead Dell desktop that got very little use, and so far I am not sure I did the right thing.  Really wish I could get this "automatic" rebooting thing fixed.  (Reboots with no notice, while doing normal tasks - internet, word docs, etc.)  Thanks again for your help.  Let me know if I should try anything else.

Similar Messages

  • Mac reboots on its own

    My Mac reboots on its own a few times a day. I have checked all the permitions and have checked the disk. No issues found. After the reboot this is the report I send:
    Sat Aug  3 20:19:27 2013
    panic(cpu 1 caller 0xffffff7f93a32f33): NVRM[0/2:0:0]: Read Error 0x0061002c: CFG 0x00000000 0x00000000 0x00000000, BAR0 0xd2000000 0xffffff809382d000 0x094700a1, D0, P3/4
    Backtrace (CPU 1), Frame : Return Address
    0xffffff801b813c40 : 0xffffff801321d626
    0xffffff801b813cb0 : 0xffffff7f93a32f33
    0xffffff801b813d70 : 0xffffff7f93b0712d
    0xffffff801b813db0 : 0xffffff7f93d046b2
    0xffffff801b813dd0 : 0xffffff7f93ada238
    0xffffff801b813df0 : 0xffffff7f93b85fcd
    0xffffff801b813e70 : 0xffffff7f93a18141
    0xffffff801b813f30 : 0xffffff7f939d7975
    0xffffff801b813f60 : 0xffffff801323e25e
    0xffffff801b813fb0 : 0xffffff80132b3137
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f939 d1000->0xffffff7f93c76fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9392b000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f939bd000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f9397a000
             com.apple.nvidia.nv50hal(8.1.2)[988EAF3A-3318-3787-8A5A-844830FA1522]@0xffffff7 f93c82000->0xffffff7f93f56fff
                dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f939 d1000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9392b000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide:     0x0000000013000000
    Kernel text base: 0xffffff8013200000
    System model name: iMac9,1 (Mac-F2218FC8)
    System uptime in nanoseconds: 15074033463761
    last loaded kext at 3498511390977: com.astrill.astrill.kext          1.0 (addr 0xffffff7f954c3000, size 32768)
    last unloaded kext at 202946162466: com.apple.driver.AppleFileSystemDriver          3.0.1 (addr 0xffffff7f95380000, size 8192)
    loaded kexts:
    com.astrill.astrill.kext          1.0
    org.virtualbox.kext.VBoxNetAdp          4.1.2
    org.virtualbox.kext.VBoxNetFlt          4.1.2
    org.virtualbox.kext.VBoxUSB          4.1.2
    org.virtualbox.kext.VBoxDrv          4.1.2
    com.symantec.kext.fw          1.0.3f5
    com.symantec.kext.filesecurity          1.4.3f19
    com.Cycling74.driver.Soundflower          1.5.2
    com.radiosilenceapp.nke.PrivateEye          1
    com.symantec.kext.ips          3.2f8
    com.symantec.kext.pf          4.2.1f7
    com.symantec.kext.internetSecurity          1.3.2f5
    com.apple.driver.AppleBluetoothMultitouch          75.19
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager          4.1.4f2
    com.apple.driver.AGPM          100.12.87
    com.apple.driver.AppleHDA          2.3.7fc4
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.GeForce          8.1.2
    com.apple.driver.AppleMikeyDriver          2.3.7fc4
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.4f2
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleBacklight          170.2.5
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleIRController          320.15
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.iokit.SCSITaskUserClient          3.5.5
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.1
    com.apple.driver.AppleUSBHub          5.5.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.driver.AirPort.Brcm4331          615.20.17
    com.apple.driver.AppleAHCIPort          2.5.2
    com.apple.nvenet          2.0.19
    com.apple.driver.AppleUSBEHCI          5.5.0
    com.apple.driver.AppleUSBOHCI          5.2.5
    com.apple.driver.AppleEFINVRAM          1.7
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleACPIButtons          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.7
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2.1
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.AppleUSBHIDKeyboard          170.2
    com.apple.driver.AppleHIDKeyboard          170.2
    com.apple.driver.IOBluetoothHIDDriver          4.1.4f2
    com.apple.driver.AppleMultitouchDriver          235.29
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.nvidia.nv50hal          8.1.2
    com.apple.NVDAResman          8.1.2
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.4f2
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOAudioFamily          1.8.9fc11
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOBluetoothFamily          4.1.4f2
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleHDAController          2.3.7fc4
    com.apple.iokit.IOHDAFamily          2.3.7fc4
    com.apple.driver.AppleGraphicsControl          3.4.5
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleSMBusPCI          1.0.11d0
    com.apple.driver.IOPlatformPluginFamily          5.3.0d51
    com.apple.driver.AppleSMBusController          1.0.11d0
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.5.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
    com.apple.iokit.IOUSBUserClient          5.5.5
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          530.4
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBFamily          5.6.0
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          1.7
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.7
    com.apple.iokit.IOPCIFamily          2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Thanks for all your help

    Welcome to Apple Support Communities
    Jack1979 wrote:
    Sat Aug  3 20:19:27 2013
    panic(cpu 1 caller 0xffffff7f93a32f33): NVRM[0/2:0:0]: Read Error 0x0061002c: CFG 0x00000000 0x00000000 0x00000000, BAR0 0xd2000000 0xffffff809382d000 0x094700a1, D0, P3/4
    Backtrace (CPU 1), Frame : Return Address
    0xffffff801b813c40 : 0xffffff801321d626
    0xffffff801b813cb0 : 0xffffff7f93a32f33
    0xffffff801b813d70 : 0xffffff7f93b0712d
    0xffffff801b813db0 : 0xffffff7f93d046b2
    0xffffff801b813dd0 : 0xffffff7f93ada238
    0xffffff801b813df0 : 0xffffff7f93b85fcd
    0xffffff801b813e70 : 0xffffff7f93a18141
    0xffffff801b813f30 : 0xffffff7f939d7975
    0xffffff801b813f60 : 0xffffff801323e25e
    0xffffff801b813fb0 : 0xffffff80132b3137
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f939 d1000->0xffffff7f93c76fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9392b000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f939bd000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f9397a000
             com.apple.nvidia.nv50hal(8.1.2)[988EAF3A-3318-3787-8A5A-844830FA1522]@0xffffff7 f93c82000->0xffffff7f93f56fff
                dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f939 d1000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9392b000
    Your graphic card is damaged. This could be related to extensions, but the kernel panic gives you the message that your graphic card has failed.
    You can only make a backup of your files with Time Machine or Disk Utility's Restore feature, and take the iMac to an Apple Store or reseller. Your computer has got the graphic card soldered into the logic board, so this will be a very expensive repair

  • WHY does my cursor decide on its own to go sit somewhere OTHER than where I just got finished typing? I see it in Yahoo mail, and Facebook. It STINKS.

    I type a lot of stuff, but I'm a one-fingered typist. I very often look up to proof-read what I just entered on my laptop screen, and I see it's been jumbled, with words cut-up and cut-off, but the word and the sentence have been inserted (as if cut-and-pasted) u a discussion board I like to visit and contribute to. (It's called: Mutual Fund Observer.)p further, where they don't belong. And I did not type that stuff in that particular spot!
    This happens in Yahoo mail, in Facebook, and also on
    DING! It JUST NOW HAPPENED AGAIN. Can you see what I mean? This is enough to make someone angry in a big way. It STINKS. I hope you can find a "fix" for this!
    Now let me back up and finish this message AS INTENDED!
    I type a lot of stuff, but I'm a one-fingered typist. I very often look up to proof-read what I just entered on my laptop screen, and I see it's been jumbled, with words cut-up and cut-off, but the word and the sentence have been inserted (as if cut-and-pasted) up further, where they don't belong. And I did not type that stuff in that particular spot! This happens in Yahoo mail, in Facebook, and also on a discussion board I like to visit and contribute to. (It's called: "Mutual Fund Observer.")
    It is as if the mouse or the laptop has decided on its own to go and relocate the cursor where it feels like putting it. This is terribly frustrating. It makes me want to scream.
    Thank you.

    Hi,
    You can consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''. If it is okay, you can then install the Mozilla Archive Format add-on.
    If you have security software installed you can try to delete all existing entries for Firefox and its sub processes in the different configuration modules and try to fully trust/allow Firefox afresh. Even after network access is completed, Firefox would still need unlimited access to its disk cache/memory as well as its files. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
    [http://kb.mozillazine.org/Firewalls AV/Firewall Configuration]

  • Why does this mavericks start on its own? even after downloading GFX card status it keeps on restarting. Fix it Apple. I'm going Banana.

    The laptop says kernel error, but after downloading GFX card status the laptop keeps on getting restarted. Oh why did i buy a macbook?

    Either your Mac is broken, or you have something installed which isn't compatible. Hard to tell without the kernel panic log. 

  • Why does facetime hang up on its own?

    When im on facetime for a couple of mins with my friend, facetime hangs up on its own

    Bad connection either your or your recipient Wi-Fi.

  • Yahoo displays in line form other than the standard Yahoo screen, How do I change this and why does it keep changing on its own?

    I have Yahoo as my default search engine. When I enter through FireFox the display comes up as a line display instead of the standard Yahoo Screan with photos etc. I need to know what is causing this to happen and how to change it back? when Yahoo is accessed through other browsers this is not a problem. Any suggestions?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Mac keep rebooting on its own

    I have a Imac with osx 10.5.8 that keeps rebooting on its own . I have gone over the consol logs and I can not see any thing that could be do it . I found one log entry that is the last log entry befor it reboots
    Feb 12 09:39:12 localhost kernel[0]: hi mem tramps at 0xffe00000
    that entry is their both times it rebooted today at the same location of 0xffe0000
    is this a memory problem or is it some thing else. I have over 20 mac's i manage in this office and this is the only one we have issues with any help would be great
    Message was edited by: apps4u

    What model iMac is it please? Hard for me to tell from your specs.
    Dale

  • Why does my mac pro slow right down when its on battery ???

    Why does my mac pro slow right down when its on battery....... cant watch dvds as they keep jumping, internet slows down as does everything, then i run it off the mains and its all fine again, so my mac book pro has not become very portable, please help

    Yo , yeah its a mac book pro, noly got it about 6 months ago, not sure if it has a removable battery, it all looks completely sealed, this is what it said in the battery menu:
    Model Information:
      Serial Number:          W01264M3HD3BA
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0201
      Hardware Revision:          000a
      Cell Revision:          0158
      Charge Information:
      Charge Remaining (mAh):          5021
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5923
      Health Information:
      Cycle Count:          49
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -958
      Voltage (mV):          11946
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    Hope you can help, its reallly quite annoying considering its quite new.
    Cheers

  • My iPad mini keeps on rebooting on its own, any idea why?

    my iPad mini started rebooting on its own about a few days ago.
    it keeps on doing this after I use it for a little bit.
    sometimes it is a few minutes, other times it may be after a while.
    sometimes it happens when I just open the cover .

    Checked and I bought it last October, so it is under warranty.
    Chatted with Apple support and they asked me to restore to factory defaults.
    Spent 40 minutes restore it to factory defaults and it still does it.
    They made me an appointment for store tomorrow and if they can confirm it, they will most likely replace the unit.
    I am glad it is under warranty, but it was very close to one year.
    Hopefully this does not happen again in another year.
    It seems to happen a lot when i use the cover.
    So....is this a reoccuring problem with the magnetic cover switch???

  • My imac reboots on its own from sleep at irregular intervals

    My imac reboots on its own from sleep at irregular intervals. Is this normal?  why does it do this, it didn't do it untill about six months ago. At least I didn't notice it. There is no power outage, not even a blip when it happens.

    im just as a starter as u in macs just so u know, i did that yesterday and it fixed my isight(it was showing black). ok u unplug ALL cables, usb etc etc everything from the imac and unplug the main power cord too for like half a minute and then replug everything in and thats it i believe

  • Imac reboots on its own

    I have a 20 inch Imac Intel. I have had the logic board and airport card replaced. Every day before and after the repairs my computer will reboot on its own. Steps I have taken so far:
    1. PRAM resets
    2. Testing Via TechTool (Came back fine)
    3. Deleted Powermanagment in System Preference.
    I have memory from Other Computer World installed. When I ran the tests from TechTool it said the memory was fine. I was wondering if anyone else's IMAC does this. If it does how did they fix it
    Imac Intel 20" 2 GB Ram   Mac OS X (10.4.8)  

    im just as a starter as u in macs just so u know, i did that yesterday and it fixed my isight(it was showing black). ok u unplug ALL cables, usb etc etc everything from the imac and unplug the main power cord too for like half a minute and then replug everything in and thats it i believe

  • Why does my mac air always restart when I open it in our university?

    Why does my mac air always restart when I open it in our university?
    This has been always bothering me for some time already. Whenever I open my macbook air in our university it always warns me to restart my device. When I do the same thing happens over and over again until it reached 27 reports.

    I'd make a sound too if i was put into a bag haha.
    Only thing i could think of it it has a mind of its own or your putting your computer to sleep. Try shutting down your mac before placing in your bag and see if that changes things.

  • Why does my Mac Mini running on Mavericks so slow to start and load apps?

    Why does my Mac Mini running on Mavericks take so long to start and load apps?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My ipad freezes, reboots on its own and when I try to restore the machine reboots before the process ends

    Just bought this ipad in June 2013 and then all of a sudden about two weeks ago, I discovered the machine reboots on its own and would only be active for less than 2 minutes.  I check the auto-lock assigned minutes and it was set on 15 minutes even at this, it will still go off after less than 2 minutes.  I then checked on some of the suggestions on the net for a similar problem and resolved to pressing and holding the sleep/wake button simultaneously with the Home button to force a reboot.  Even at this no change.  Then I tried connecting the machine to a PC logging on to the itunes to do a backup and restore but the machine will not stay long enough to complete the procedure before rebooting on its own.  Any help?

    Try here:
    iOS: Not responding or does not turn on

  • HP 2140 Mini reboots on its own...

    Hello everybody, I need your help.
    My HP2140 Mini reboots on its own after being shut down. This only happens when it's on AC-Power, not when on battery power only. It's due to a software glitch and not due to a faulty power supply.
    I had this problem once before and was able to get ahold of a software fix that stopped it from doing it. That software fix came directly from HP and was emailed to all HP2140 Mini owners.
    Since I had to reinstall the Operating System again, that software fix is now gone and I don't have the email anymore.
    Can anyone help?

    An alternative is SANE, here is a link, its also FREE. The first link shows the scanners supported. The second is the program link.
    http://www.sane-project.org/sane-mfgs.html#SCANNERS
    http://www.ellert.se/twain-sane/

Maybe you are looking for

  • How do I add a tracking code to my page?

    I want to add a tracking code to my page but iWeb doesn't seem to allow it. I copied the html code from a 3rd party site (Google Analytic) and tried pasting into the html widget in iWeb but when I check the tracking report it keeps telling me the cod

  • Audio interface problems with Snow Leopard

    I've just installed Snow Leopard and can't seem to record a live audio track to Garage Band. I'm using a keyboard audio interface, which has worked fine in the past. I've chosen the correct Input in Sys Pref/Sound. Ditto in the Audio/MIDI section of

  • Lightroom Slideshow into Dreamweaver?

    How do you embed a slideshow made in Lightroom and put into a page in Dreamweaver?

  • IPad 2 Bug?

    Hi,Ijust recentky updated my iPad 2 to ios5, has anyone experienced the bugs in the "photos" app on their iPad,(e.g. starting a slideshow using the origami effect doesn't work and 2nd the icon for the most recently taken photo from camera roll doesn'

  • Cannot embed interactive keynote into website

    I've made an interactive keynote presentation that has buttons that link to particular slides. When I save and export as hyperlinks only quicktime, only the first 2 slides are working and then not exactly correctly. I saw a thread made in 2004 regard