Why does no one know how to fix error 1202!!!!

Please could someone help me by finding out how to get rid of error 1202!!

I wish I could help but I've had the same problem for over 3 weeks.  Apple has given me all sorts of things to try but nothing has corrected the problem.  They've offered to charge me to attempt to fix the problem but why should I pay for something that I didn't create.  Good luck to all of us experiencing the same problem.

Similar Messages

  • HT5002 I used Inkscape on Linux before moved to Mac. Now I am trying to install it using MacPorts, but libpixman has some problems that has been reported out there. Does any one know how to fix it without the need to use other way than MacPorts?

    I used Inkscape on Linux before moved to Mac. Now I am trying to install it
    using MacPorts, but libpixman has some problems that has been reported out there.
    Does any one know how to fix it without the need to use other way than MacPorts?

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • When I log on my computer I receive an error message: apllesyncnotifier.exe entry point not found. Does anyone one know how to fix it?

    Error message when I log onto my computer.
    Does any one one know how to fix this error?
    It states: The procedure entry point Sqlite3_wal_checkpoint could not be located in the dynamic link librery SQLite3.dll

    With that one, I'd first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

  • TS3694 i keep getting error 1015 does any one  know  how  to fix this problem thanks

    i keep getting a error 1015 on itunes  does  any one know how i can  fix this problem it would be  of much help thank you

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    http://support.apple.com/kb/TS3694#error1015.

  • Does any one know how to fix this? My adobe Acrobat 10.1.12 opens and then crashes after about 5 seconds.  Just upgraded to Yosemite.

    I downloaded Yosemite and I use CS5.5. after much wrangling with Java I can now open photoshop, illustrator and indesign.
    However acrobat 10.1.12 as soon as I open a document it crashes 5 seconds later. Any one know how to fix this?

    Hi ,
    Try Un installing and reinstalling the program and make it up to date.

  • After downloading lion my safari browser doesn't want to load. does any one know how to fix it?

    After downloading lion for my mac my safari doesn't want to reload after I close a web page, I have too restart the mac just to get safari too launch.How do I fix this problem?

    My pleasure Norbert. Let us all know if it works (and maybe give me a "correct answer" rating if it does ; ).
    P.S. I grew up in Philly too.

  • Does any one know how to fix width of column generic and also wrap data without space

    I make following  changes in Template > Column Template > Column Template 1
    <td #ALIGNMENT#; headers="#COLUMN_HEADER_NAME#" style="width:300px; white-space:-moz-pre-wrap !important;word-break: break-all;"> #COLUMN_VALUE# </td>
    data is wraping but width is not getting fix.
    so any one can tell me how to solve the problem.

    Hi,
    It is much easier help on layout issues when you create example to apex.oracle.com.
    Regards,
    Jari

  • Does any one know how to fix a server problem ?

    I use a MacBook Pro, operating system is Yosemite 10.10.2. When I click on Safari I get a message that Safari can't connect to the internet. Theres a long pause and then sometimes it connects. I took the MacBook to Apple Genius & they erased the PC , brought it home and did a reinstall from my time Machine using a Passport, Thanks

    did a reinstall from my time Machine
    Was it working before you did that?

  • Does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please!

    does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please! thanx

    Work through all the troubleshooting here: iTunes: Advanced iTunes Store troubleshooting
    B-rock

  • Does any one know how Fixed Assets links to the Purchasing ledger?

    Hi,
    Does any one know how Fixed Assets links to the Purchasing ledger? As I have looked high and low and can't find any table mappings or anyway the ledgers link, this is a problem as I am struggling to track an asset back to a Purchase Order.
    I have looked at http://etrm.oracle.com with no joy and any help with this would be great.

    You would want to try this forum as well:
    General EBS Discussion

  • Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

    Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
    apple.com/support
          -6002F
    Does any one know how I can fix this without a recovery disc? Thanks

    I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
    I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
    I tried swapping with a Mechinal Harddrive, no luck.
    Kept the Mechanical drive in, and tried with some other Ram, it worked..
    So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
    It was Ram for me..

  • When updating to  itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

    When updating to  itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

    1) The older version of Bonjour can not be removed. Contact your technical support group.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • My ipad don't shows charging sign but charging hidden Any one know how to fix it?

    My ipad mini does not show charging sign but charging hidden.
    Any one know how to fix it?

    This may not work but it can't hurt to try. Restart the iPad and then try again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Does any one know how to get my Genius Apple Apps screen to work? Genius is Blank

    Does any one know how to get my Genius Apple Apps screen to work? Genius is Blank now regardless of how I enter the option. My upgrades, purchased, featured and searches all work in Apple Apps app. I have checked my settings for a possible fix to no avail. Tried all hand motions to see if they would fix or help and of course they did not. My Genius worked with some real possible apps I might want, now - absolutely nothing. Any solution that is actually possible will be appreciated.

    You need to be quite a bit more specific.  What exactly is the Desktop manager doing or not doing?  You have a Pearl....what model?  Look in Options >About and tell us what model you have and what OS it's running.  Also, what version of Desktop Manager, OS on your PC, etc. 
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • My safari browser seems to have been taken over by a malicious program called only-search.  Does any one know how to uninstall this program from safari?  I am running osX 10.10.

    My safari browser seems to have been taken over by a malicious program called only-search.  Does any one know how to uninstall this program from safari?  I am running osX 10.10.

    There is no need to download anything to solve this problem.
    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Maybe you are looking for

  • Mail not sending

    When I try to send mail from Apple Mail, I get the message: This message could not be delivered and will remain in your Outbox until it can be delivered. The connection to the server "smtp.mac.com" on port 25 timed out. This happens on my work and ho

  • Can't close Scrollable Result Set

    Hello all, I am using a ResultSet created with the statement... Statement stmt5 = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY); I am using the oci8 driver to connect to a 8.1.6 database. The resultset returns pr

  • Stop PO idoc

    Based on a condition, I need to stop a Purchase order IDOC (orders05) from being generated.. Any ideas?

  • Interactive list

    Hi, I am displaying some list using a write statement with column heading. the list which is displayed is interactive. on double clicking on first list, it goes to next screen and shows second list. My problem is that i want to set different column h

  • Something wrong with itunes u, downloads dont appear in library

    I'm trying to download iOS development Videos podcast from itunes u and while certain videos have been downloaded, 13 of them wont appear as downloaded in itunes even after completing their downloads several times. any help?