Why does not my hdmi kabel work from my iMac to my receiver?

I have bought a new HDMI kabel, the last one worked fine. But i needed a longer one this time. And now I dont get picture nor sound on my TV??? Help!

Apparently an HDMI cable over 50 feet in length will begin to suffer signal degradation.  Does this apply in your case?
Hope this helps

Similar Messages

  • Why does not my servo motor work?

    Hello all,
    I can work my servo motors, so I have two questions.
    Firstly, I'm using PXI-7340 & UMI 7764 to control AC motor on servo motor (TAMAGAWA SEIKI co.),
    But in MAX, motor doesn't work with servo type.And there is no signal between AnalogOutput and AnalogOutputGround.
    Can I connect UMI to the motor correctly?
    Now, I connect encorder signals with changing differential line driver (motor driver) to TTL (UMI) using quadruple differential line receiver.
    Is it right?
    If it is right, why does the motor work?
    Secondarily, when I use stepper type in MAX, the motor work with open-loop. But when I use stepper type in MAX, the motor doesn't work with cloosed-loop.Why?
    Polarities of encorders(A, B, Index) make matches my servo motors by setting in MAX.
    Why?
    Thanks,
    megumi
    Attachments:
    TAMAGAWA SEIKI motor&driver.pdf ‏3063 KB

    Thank you for your reply.
    The "does not work" means that the motor doesn't move with servo type.
    In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
    I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
    So I would connect correctly wiring of encorders, but the motor doesn't move.
    Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
    I supply it if you need the other setup of wiring or information.
    Regards,
    Megumi

  • Why does not  open(fileObj,rawOpt); work properly?

    Hi!
    I'm trying to open a RAW file without header, so I want to say to Photoshop what dimensions I want. This is my idea:
    var filename = File.openDialog("RAW");
    if (filename) {
    var rawOpt = new CameraRAWOpenOptions();
    rawOpt.settings = CameraRAWSettingsType.CAMERA;
    var fileObj = new File(filename);
    rawOpt.bitsPerChannel = BitsPerChannelType.EIGHT;
    rawOpt.width=30;
    rawOpt.height=1000;
    rawOpt.channelNumber=3;
    docRef = open(fileObj,rawOpt);
    But my Photoshop CS2 fails telling me that docRef = open(fileObj,rawOpt); is not implented.
    However, if I use open(fileObj) it works, but it shows me a dialog to insert dimensions and I don't like that.
    Any idea/suggestion?
    Thanks a lot for your time.
    BTW. I inserted this question in the wrong forum before, so now I put it here. Sorry for any inconvenience.

    Thank you for your reply.
    The "does not work" means that the motor doesn't move with servo type.
    In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
    I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
    So I would connect correctly wiring of encorders, but the motor doesn't move.
    Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
    I supply it if you need the other setup of wiring or information.
    Regards,
    Megumi

  • Why does not my iPhone 5S work on LTE of Plus GSM network in Poland although my model supports LTE Band 3?

    am My iPhone 5S does not support LTE of the Plus GSM network in Poland? It works in Band 3 and my model supports that band but it is not possible to use LTE although it works on my other Android phone. The network operator suggested contacting Apple.

    Thank yo Tim, but actually I beg to disagree with you about that I chose to use the wrong carrier. But I have not given all details of the story:
    When I was buying the iPhone at an Apple store in the US I explicitly asked whether LTE would work on my network in Poland,which uses LTE Band 3. She was very nice and checked something in the specifications and said that the model I would buy supports this band so that everything would be fine.
    Unfortunately back in the country it turns out it does not work not and I expect Apple to take a stand on that. I have already filed a complaint on Apple helpline. I hope they will solve the problem...

  • Why does not USB flash card work?

    MacBook Pro 13' (late 2011)
    OS X Yosemite 10.10
    My USB hub does not see any flash card, but it works when I use my iPhone.
    What have I done: I tried to open my flash card. Then, I cleaned my flash card with Disk Utility and tried to connect to Mac again. I also tried to use different flash cards. But there was no effect.

    Thank you for your reply.
    The "does not work" means that the motor doesn't move with servo type.
    In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
    I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
    So I would connect correctly wiring of encorders, but the motor doesn't move.
    Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
    I supply it if you need the other setup of wiring or information.
    Regards,
    Megumi

  • Why does air display no longer work from IMac, with mavericks to apple tv???

    Ever since last two updates of Mavericks, I have not been able to broadcast to apple tv as extended or mirroring desktop. It says it is avalable, and does nothing but a black screen on apple tv, and does not even come up as a desktop in display prefrences. What should I do?   IMac:10.9.2

    Hello, IamOMan. 
    Thank you for visiting Apple Support Communities.
    Sometimes a simple power cycle of all devices can resolve this issue.  However, I would recommend taking a look at the section labeled Troubleshooting AirPlay Mirroring in the article below.  Make sure all updates have been processed for the Apple TV and Mac prior to troubleshooting. 
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/ht5404
    Cheers,
    Jason H.

  • Why does iPhoto 8.1.2 work on one iMac but not another when both are the same spec both running Mavericks 10.9.1?

    I have a studio of 7 iMacs all running Mavericks 10.9.1, six of the machines are able to open iPhoto 8.2.1 but for some reason after updating the seventh, iPhoto vanished completely from that machine. I reinstalled it from a copy I had saved on a HDD but it now says it's unsupported with this version of OSX. I don't want to pay the £10 + for a piece of software that is only being used to import photos from the occasional iPhone so wont be installing the new version, especially as I know 8.2.1 does work on Mavericks.
    Any suggestions?
    Many thanks

    Reinstall v8 from the install disk as, at a guess, the version of the HDD is missing components.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Why does not drag and drop work?!

    Hello,
    I am trying to implent a drag and drop from a table to an icon representing a trash.
    The drop handler fails in converting the selected rows to a list:
    com.sun.el.MethodExpressionImpl@87d9c00d javax.el.ELException: java.lang.ClassCastException: java.lang.String cannot be cast to java.util.List
    Could you help me to understand why? Below are the details.
    This is the af:table:
    <af:table var="row" rowBandingInterval="0" id="t1"
    value="#{bindings.MyView1.collectionModel}"
    rowSelection="multiple"
    columnStretching="last"
    horizontalGridVisible="false"
    verticalGridVisible="false" fetchSize="-1"
    autoHeightRows="6" width="190"
    disableColumnReordering="true">
    <af:column sortable="true" headerText="Entry" id="c1"
    align="start">
    <af:outputText value="#{row.Description}" id="ot1"/>
    </af:column>
    <af:dragSource actions="MOVE" defaultAction="MOVE"
    discriminant="delete"/>
    </af:table>
    This is the drop area:
    <af:image source="Images/empty_trash_32.png" id="i2">
    <af:dropTarget dropListener="#{backingBeanScope.DropHandlerBean.dropHandler}"
    actions="MOVE">
    <af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
    discriminant="delete"/>
    </af:dropTarget>
    </af:image>
    This is the failing listener listener (the failing point is bold):
    public DnDAction dropHandler(DropEvent dropEvent) {
    DnDAction dnda = DnDAction.NONE;
    if (dropEvent.getProposedAction() == DnDAction.MOVE) { // delete
    RichTable table = (RichTable)dropEvent.getDragComponent();
    //determine the rows that are dragged over
    Transferable t = dropEvent.getTransferable();
    //when looking for data, use the same discriminator as defined
    //on the drag source
    DataFlavor<RowKeySet> df =
    DataFlavor.getDataFlavor(RowKeySet.class, "delete");
    RowKeySet rks = t.getData(df);
    if (rks == null) {
    return DnDAction.NONE;
    Iterator iter = rks.iterator();
    while (iter.hasNext()) {
    //get next selected row key
    System.out.println(rks.toArray().length); // the number of selected rows is ok
    List key = (List)iter.next(); // here gives: java.lang.ClassCastException: java.lang.String cannot be cast to java.util.List
    //make row current so we can access it
    table.setRowKey(key);
    //the table model represents its row by the ADF binding class,
    //which is JUCtrlHierNodeBinding
    JUCtrlHierNodeBinding rowBinding =
    (JUCtrlHierNodeBinding)table.getRowData();
    Row row = (Row)rowBinding.getRow();
    //delete row;
    row.remove();
    //activate animation
    dnda = DnDAction.MOVE;
    return dnda;
    thanks.

    I did try, I obtained this:
    java.lang.NullPointerException
    Why NullPointerException?
    I don't know if this helps, but consider that the collection model comes from a ViewObject built on three EOs with many fields, although the table only shows one column.
    This is the Iterator in my pageDef:
    <table IterBinding="MyView1Iterator" id="MyView1">
    <AttrNames>
    <Item Value="Cod1"/>
    <Item Value="Cod2"/>
    <Item Value="Cod3"/>
    <Item Value="Cod4"/>
    <Item Value="Description"/>
    <Item Value="Cod5"/>
    </AttrNames>
    </table>
    Any idea?
    I will see the Key content with the debugger.

  • Why does not my Pages app work?

    I have got a problem with Pages. Since I have been using the IWork for many years,  I am aware how to do it. Now I updated the apps and I can not open it when I turn on the ICloud. There is no problem with Keynote and numbers. Only the Pages.
    When I try to open it, disappears.
    Thanks

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • Why does not photo e-mail work in Photoshop elements 12 and Windows 8.1?

    I've tried to send photo e-mail with my new computer. We have used this function for many years with Elements 5 and Windows XP,

    More info: First time I got a message to confirm my e.mail address returning an answere and a code, The problem is that I've got no e-mail. I have tried both my two e-post programs, Thunderbird and Outlook (within Windows8) and I hav tried them both to bi 'Standard program'.

  • Is it free to send messages in iMessage to another county? if yes why it does not show that these messages from iMessage?

    Is it free to send messages in iMessage to another county? if yes why it does not show that these messages from iMessage?

    if you receive an imessage not on any internet connection you will receive it as a sms (green) and yes it counts toward your texting plan

  • I m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    i m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    tom i have been using ubuntu for c++ project
    i use lambda and atomic (c++0x) but now as I am working on MAC not able to use them
    installed xcode(4.3) and changed compiler settings to LLVM3.1 but still both features are not available
    to compile wanted to have g++ which supports c++0x features ...
    new to MAC (2-3 days) so was in rush to solution
    let me know if you have some suggestion ...
    else will try with eclipse cdt .... 

  • Why the mouse pointer in Logic Pro does not change shape during work in OSX 10.9.1?

    I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
    Why the mouse pointer in Logic Pro does not change shape during work???
    It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
    At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
    The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
    With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
    This thing drives me crazy!
    Solutions?
    Here some ideas in other foums:
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
    But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!

    I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
    The Result:
    Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
    BUT
    Reason and Nuendo dont' have this issue !!
    I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
    And that's not all!
    After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
    Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple!

  • HT204291 Airplay intermittent problem, why does not airplay work well anylonger?

    Airplay intermittent problem, why does not airplay work well anylonger. Suddenly it drops out. Now this function has gone from great to ****.
    Trying to view streamed content from the ipad to the Apple TV? Nah forget about it. Sooo dissapointing.

    Restart your wifi router

  • Why Bridge (CS5) does not make a PDF file from multiple images

    Why Bridge (CS5) does not make a PDF file from multiple images? It used to work fine earlier, but now nothing happens when using OUTPUT for web or PDF.
    I have uninstalled and installed my PS three times allready, so please not suggest that, it didn't help.
    I have Creative Suite Premium, mac os x 10.6.8

    Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop.  I'm moving your question to the Bridge forum for specialized attention to your situation.

Maybe you are looking for

  • How can I have multiple instances of a column that itself holds a foreign key reference?

    I am new to Visual Studio so to start learning it I first of all downloaded a sample available at https://code.msdn.microsoft.com/ADPNET-Entity-Framework-2d1160cb and started working around it. Since I have fairly good knowledge of VB6 and SQL it did

  • How to stop someone from filling out pdf form multiple times?

    My customers order my service by down loading a .pdf form. They then fill out the form and submit the form to my email. How do I stop a customer from submitting the form multiple times. I would like for the customer to submit the form only once fille

  • CS2, upgrading to CS5 for Maverick ? How ?

    I have installed CS2 in tiger, then upgrading to CS5 (by CD volume). I've bought a Imac (Maverick). How could I instal CS5 then CS2 in not reconized because it's a power PC soft ? Pleas help me !! Thanks

  • How to ignore .dtd

    please help me for this problem I have a xml file: datasources.xml <?xml version = '1.0' encoding = 'windows-1252'?> <!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://xmlns.oracle.com/ias/dtds/data-sources.dtd"> <data-sources> </data-sources

  • IOS 4.2 has battery saving feature but is up to network to implement it...

    http://www.appleinsider.com/articles/10/11/30/ios4_2_supports_new_technology_for_reducing_networkcongestion.html This is realy interesting and a feature some would be willing to get...Now only if carriers in the US can impliment it...