Why does not the scroll on tbody in new versions of Firefox and how it can solve the problem?
why does not the scroll on tbody in new versions of Firefox and how it can solve the problem?
scrolling overflow on tbody is no longer supported because that is not allowed in CSS 2.1 specification.
See [https://developer.mozilla.org/en/CSS/overflow notes for overflow]
Similar Messages
-
HElp
Read: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees. -
Muse Site does not display completely, amazingly, in Safari. In Chrome, Firefox and IE, however, the site is displayed correctly ...
KariHi Aish
The site URL is: http://hotelegerkingen.businesscatalyst.com
The page
http://hotelegerkingen.businesscatalyst.com/räume --- preise.html
and
http://hotelegerkingen.businesscatalyst.com/menus.html
not show the whole content (only in Safari)
Thanks for the support!
Regards ,
Kari
H·B·H Communications & Events
Karl Wälle
[email protected]
Breitensteinstrasse 96
8037 Zürich
Fon +41 44 447 40 90 (direct 99)
Mobile +41 79 964 65 12
Fax +41 44 447 40 89
[email protected]
www.hbh-com.ch<http://www.hbh-com.ch>
Am 14.08.14 17:31 schrieb "Aishvarya Raj Rastogi" unter <[email protected]<mailto:[email protected]>>:
Muse Site does not display completely, amazingly, in Safari. In Chrome, Firefox and IE, however, the site is displayed correctly ...
created by Aishvarya Raj Rastogi<https://forums.adobe.com/people/aishvarya+rastogi> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6640545#6640545> -
From time to time when I click a searched link the color of visited links does not change. It works fine after I delete history and cookies. Can I fix that. I am using windows XP. Thanks
Here's the error message I get.
Note the TC is connected to my Airport Extreme via ethernet and my iMac is also connected to the AX via ethernet so it's not a wifi issue.
I can see the TC in the finder so it's not 'gone' from the network either.
Also note that just then the TM system pref pane was claiming a backup error, citing my 'network password' and still refusing to backup. I waited 5 minutes and did some tidying of my office while I pondered this and then tried again and voila it worked ok. -
after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?
If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...
Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory. -
Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?
All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then? -
When I switch libraries I "lose" the majority of the material in my main library (or at least I can't see it) and can only restore it by repairing the database. Can anyone tell me why this is happening and how I can resolve the problem? Thanks
I seem to have found a way around it. Rather than switching libraries by going into files/switch libraries I used Aperture Preferences to change them. I've done it a couple of times and it appears to work OK.
That is an interesting finding. It suggests, that your "Preferences" file "com.apple.Aperture.plist" may have been corrupted and you fixed it this way. Can you now switch between libraries the usual way? If not, I'd try to remove the "preferences" file from the user library to the Desktop and relaunch Aperture.
The Aperture 3: Troubleshooting Basics:http://support.apple.com/kb/HT3805
describe how to remove the user preferences. -
in iMovie:
I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?
please help.
J. AalbersShouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project? -
When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?
mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?
Step by step, how did you arrive at seeing this agreement?
-
I updated to the new version of Itunes and now I can't sync my ipod or iphone. It's not recognizing either in Itunes, but both are charging. How can I get Itunes to recognize my devices (that have always been recognized until this latest software update)?
Hi there bowlerinager75,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting suggestions that’ll resolve most issues like the one you described, where your iOS devices are no longer recognized by iTunes on your PC.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Cheers,
-Jason -
My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?
Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory. -
I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?
how new is the Notebook ?
Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB
Maybe you are looking for
-
Toplink - JPA ignores lazy fetchtype , when it should NOT
I'm using Blaze Data Services (The open sourced component of LiveCycle Data Service) , as well as Spring. Basically, I have concluded that even while closing the entity manager within the DAO, calls to get a collection on an object after the service
-
Geetings, We run the SM20 audit log reports each month for DDIC activity when its associated with a terminal name. I understand best practice says to lock DDIC but because it is used for so many automated jobs the Basis group has not had the time to
-
Investment order to asset class
hai, Is it possible to assign investment order to asset class (apart from AUC) instead of Asset Master. govind.
-
Fsck on HFS+ File System and bad block counter
Hi community, does the fsck command check also for bad blocks in single user mode? Is in Mac OXS a similar command available like the dumpe2fs command for ext2/3 file systems to print out the actual number of bad blocks? Thx & Bye Tom
-
Computer shut down and restart
My HP Pavilion dv4 shuts down and restarts whenever it wants to. The first warning is that my cd drive will engage then my screen goes black and white writing appears that says "A problem has been detected with your computer. Windows has shut down