Why does only the first movement of a symphony play?

I have all of Mahler's symphonies on Itunes. I try to play them on my Ipod and the first movement of each symphony plays and then it shuts off as if the album is done. Any ideas what I did in loading these CDs onto Itunes that could cause this?
In case you're wondering:
Each symphony is listed as an album, with each movement as a track of that album. The disk of symphony #1 says "disk 1 of 13". Part of a compliation: No. Include when shuffling: No.
Thanks for any help.

The Apple guy told me yesterday that you have to RECORD it first.
Start from the first slide and go thru all of them.
Then they will playback.

Similar Messages

Why does only the first page of seach results show, with further pages graying out?

In a search, I may get >1,000,000,000 hits, but only the first page is readable. "Next" gives me a grayed out screen and FF freezes. Any of the offered searches at the bottom of that first screen will do the same thing. Repeated hitting "back" will clear it.
This has been true, through all the upgrades, including a backgrade to 3.6 (?) for 64-bit. This makes FF useless as a search platform, though it is my preference, even over Chrome, if it would work.
Windows 7 Ultimate, 64-bit, 8GB Ram
High speed to house, wireless lan in house

That does seem rather useless.
Use Automator - it has a "PDF to Images" action that will do exactly what you need. Drop your document into the workflow, drop the "PDF to Images" action in right after that, set any options that you need (like where to save) and then click "run"
Barring that, I've found that sometimes Adobe Reader will sometimes work well for documents that Preview can't print, and I've found some documents that Adobe Reader chokes on but Preview handles flawlessly.

I purchased a album and only the first part of each song plays, even though the entire length is listed in the file properities. Any Ideas?

I purchased a album and only the first part of each song plays, even though the entire length is listed in the file properities. Any Ideas?

Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library and then download again from your purchased history. If the problem persists, or that facility is not available in your region, contact the iTunes Store support staff through the report a problem links in your account history.
tt2

Why would only the first line of my data set txt file work?

Hi -
I had a lot of success using variables and external data sets until today.
I have an external text file that I have imported as a data set (Image/Variables/Data Sets/Import...). All of the variables have been defined and confirmed (at least PSD hasn't told me it can't find something which is the typical error msg.)
This external text file, with the extension ".txt" has 12 lines on it, each line is 7 comma separated values, and each line is ending in a carriage return.
YESTERDAY when I used File/Export/Export Data Set as Files... the procedure went beautifully for the 8 times I used it. TODAY I only get the first of the 12 lines completed and then the export stops. There are no error messages or other signs that Photoshop has choked on something so I guess something is wrong with my text file... BUT WHAT??
Any insight on any step in this would be helpful. You all know that if I'm using this feature it's because I have TONS of repetition ahead of me if it doesn't work.
TIA your expertise,
JL

Fixed it!
When Exporting as Data sets as files... the step I missed was to select "All Data Sets" from the Data Set drop down.
Thanks all.
JL

Elements11 QUE: Why does only the audio-portion transfer to timeline when I drag a video file down.

Elements11 - 1st time user
When I drag a known good video file from the "My Videos" Folder on my laptops disk down to the "Drag Here" box in my project Timeline, only the audio portion transfers NOT the video.
I am trying to create an "Instant Movie" after watching a youtube video on the subject.
The end goal is to combine portions of three video clips into one for my sons school project.
Any help is greatly appreciated.

Elements11DRC
What version of Premiere Elements are you working with and on what computer operating system is it running?
Can we assume by your selected ID, that the program is Premiere Elements 11?
Pending further details, I will assume that you are working with Premiere Elements 11 on Windows 7, 8, or 8.1 64 bit.
Where is this "My Videos" Folder - on a DVD disc being used as a DataDisc for video storage purposes?
If so, Add Media/DVD Camera or Computer Drive/Video Importer and from there automatically into the project in Project Assets as well as on the Timeline.
If your "My Videos" Folder is a folder on the computer hard drive, then Add Media/Files and Folders to get the video into Project Assets from where you drag the video to the Timeline.
Now for the video that you are trying to import...what are its properties
Video Compression
Audio Compression
Frame Size
Frame Rate
Interlaced or Progressive
File Extension
Pixel Aspect Ratio
Probably answered the easiest by knowing the brand/model/settings of the camera that recorded the video.
Prime interest, that video compression. It could be MotionJPEG which can be problematic for Premiere Elements. It could be AVCHD.avi which cannot be imported.
We can go into greater detail on your project details once we rule in or out any of the factors mentioned above.
By the way, what is the destination for this project....burn to disc DVD or Blu-ray...export to file saved to the computer hard drive...other?
More later.
Thanks.
ATR

Why does my just rented movie say I can play it in 48 hours?

So we came home on a Friday Night and commenced our family Pizza and Movie Night, sat down covered with cheese and for the first time decided to rent a movie on the Apple TV. We had watched NetFlix movies for almost a year, with no issues. But... now my boys wanted to watch Transformers 3... we'll have to rent that. No problem! Apple TV has us covered. Rent, play, keep eating. Not so much. The spinning "thinggy," as I the 7 year old calls it, greeted us with a message we couldn't believe. "Your movie will be ready to play in 48 hours and 26 minutes."
You can imagine our house was not a pleasant place to be...
So, is this normal? Is the vaunted Apple TV rental system not a streaming service?
Jayden (the 7 year old) sends..

Sounds like this is indicative of the Apple TV not getting a good connection from which to stream... that is, data is trickling in.
If the rest of your Internet connectivity appears to be OK (you can browse around in the iTunes Store, watch YouTube videos, examine people's Flickr photos, etc.) then the only thing left is that Apple's TV rental services are in a slump. I suggest you contact the iTunes Store support channels and tell them what you are experiencing.
The URL for iTunes Store support is:
https://expresslane.apple.com/GetproductgroupList.do
for the United States. Of course, if you are not in the United States, use the support channels appropriate for your country by using this link:
https://expresslane.apple.com/GetCountriesDetails.do
Good luck!
—tonza

TS2634 Why does only the short lightning cable supplied with my iPad work and longer cable don't?

I have the latest iPad purchased through Kogan. It is a 64mb with retina display. It will only accept charge through the short cable supplied. I have purchased (3rd party i admit) longer cables to use for charging so I can sit at a sensible distance from a power outlet and still work on my ipad. I have now tried four separate cables from two different suppliers and none work. Curiously the last two work perfectly on wife's iPad which is identical except for being 32mb. I don't wont to now spend $25 on the longer cable now available from Apple to find the same result. Anyone else experience this fault?

The lightening cable is not a simple cable. It has active electronics within it and is quite clever in that the pins being used are changed depending on how the cable is being used and what is connected.
The longer the cable, the more the level of the signals on the cable will drop. This drop is sometimes enough to properly transmit and receive power or information/data. This drop is clearly too much for your iPad so it does not work. Your wife's iPad must have a slightly better tolerance on this and therefore works but it probably only 'just' works. iI would recommend that you do try Apple's cable as it is, no doubt, much more expensive, might have higher quality and will therefore work better. If the cable from Apple and your iPad do not work then you have something to ask Apple about - possibly a swap of or your iPad but I would guess that the Apple cable will work.

Why does only the USB cable that came with my phon...

I recently acquired a Nokia Lumia Icon from Verizon. I have a Lenovo Yoga Pro 2 computer running Windows 8.1 with the Windows Phone App for Desktop (WPA4D) installed. I had a very difficult time getting my Icon to be seen by my computer when connecting it with one of the half dozen micro USB cables I have laying around. WPA4D would not recognize it. Then, I connected it using the USB cable that came with the phone, and WPA4D immediately recognized it. Then I unplugged it and went back to a different cable - it was again not recognized.
What is different about the USB cable that ships with the Nokia Lumia Icon? If I want to order more, like from Monoprice, what do I order to get the same thing? Why is Nokia (apparently) using some sort of proprietary cable??
Thanks,
Eric

It is not proprietary.The charging/data cable for my GPS works.
A lot of the cables are just for charging and that is all they are wired for and they don't even have the data pin. Full size USB cables are the same way.
If I needed an extra I would get it from Nokia.

Why does only the left side of my headphone working after ios6 except in phone calls ?

After i updated my software to ios6 , i realised that the right side of my headphones doesn't work with music player nor with typing, yet it does work perfectly when i am on a phone call so it's not a hardware problem ....

thats what i meant, if the same problem persists on two headphones its the jack, but the fact that one side of the original headphones works makes me think its the headphones. plug the headphones up to the computer and see if they work then

Why does ONLY the up arrow work

I have a USB keyboard that came with my imac isight intel. I love it cuz it has the numbers on it as well but suddenly the bottom row of arrow keys no longer work. The up arrow works but the down and left and right have no results upon pushing, or even just holding down. Any thoughts? Can I take them off and clena them or something...
help
smiles
kt

Hi kt misener,
Here is an article for you that should be able to help you address this issue:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Why does only arrow move on desktop?

Why does only the arrow move on desktop but it doesn't do anything?

By arrow do you mean the mouse pointer? What are you expecting it to do?

I purchased a movie pack (2 movies) and only the first one downloaded? i have tried to download the second movie but the itunes thinks the iphone allready has it and gives the option to "watch" instead of "download"? help

i purchased a 2 movie pack from itunes, only the first movie downloaded? how do i get the second one, when i go to download the second movie i only get a "watch" button where the "download" button would normally be? help

Hello there, matt12003.
The "Watch" button in the iTunes Store usually indicates the movie is already on your device. The following link from iPhone Basics shows the steps on how to view your content on your iOS device:
Videos - Learn more about iOS 7 and iPhone - Apple Support
http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= Videos#TI209
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

ITunes movie playlist full-screen on tv for only the first one

Hi,
I am experimenting with getting what's on my MacBook Pro (15" 2ghz quad core, bought 5/11) displayed/played on my HD TV. I have tried all kinds of approaches (XBMC, Plex, Boxee (the software version), Front Row, Miro, Serviio, TV Mobli, Twonky, and who knows what else on the MBP as well as XBMC on an older Powerbook as well as using DirecTV's Media Share) but none are satisfactory. The current approach is to connect the MBP to the TV by a display port to HDMI cable.
The problem I am having is: when using iTunes to play movies on a playlist, I can get the TV to display the first movie as full-screen but when it comes to the next one, I lose full-screen. It reverts back to the original size of the video. When I play the same playlist on the MBP display, successive movies stay in full-screen. (Of the two movies i have tested, the first is an mp4; the next one is an m4v.)
Is there any way I can get movies played on an iTunes playlist to stay full-screen when displayed on the TV?
All of my movies are things I've recorded with EyeTV or otherwise captured or digitized and most are converted to QT. Some are flash, some are Mpegs and I may have a few other formats. Nothing has DRM. I don't have any copyrighted "real" movies; they're all little things (music videos, segment from home movies, etc) I have put together. (Features like "scraping" with Plex for example, are completely worthless/inappropriate for me and otherwise ruin what could be a good approach to dealing with all of my media.)
I would also be curious about anyone's ideas about the best way overall to display movies and pictures from the MBP onto the TV. For streaming video I will just drag a browser window over to the TV and then go full-screen. That works for me. It is important that I keep the MBP display free for the usual computer stuff. I don't want it blacked out or otherwise made useless so any suggestion has to bear that in mind. So far I can do almost all that I want but I haven't settled on the best way yet.
I am ok with having to switch the audio output on the preference pane to the TV when I do this.
I am having one other issue: Sometimes I will lose audio half-way into one of these short movies (3-4 minutes long) on my iTunes playlist. I have dragged the movie window back to the MBP display and it still has no audio. I will then restart that movie and it will play fine on the MBP. I don't know what is going on with that. I am worried that the cable may not be able to carry audio ALL the time but why would I still get no audio when I have dragged the movie window back to the MBP if the cable was at fault? Any ideas on what is going on here?
Many thanks.
John L

EDIT: Please disregard the previous post. I am swimming on vicodan after surgery this morning and did not realize how atrocious my sentence structure and spelling were. Yeesh.
Not sure what the problem is. Using my iPhone 3G and component cable I watched Iron Man in widescreen on my Mitsu 62" tv but when I tried to play Journey to the Center of the Earth it will only play full screen. When I play it on the iPhone it will play in widescreen. Does anyone have a clue here because I sure don't. Thanks. Happy Thanksgiving.

Why do only some QuickTime movies play on the iPhone?

Why do only some QuickTime movies play on the iPhone?
I have noticed that only some QuickTime movies play on the iPhone, does anyone know why?
Thanks,
Brandon

Depends on how the movies are encoded for Quicktime (i.e. which compression/codec). The iPhone supports only H.264 video.

Lately when I do an images search only the first page actually shows the images- the rest show blank squares- why, and how do I fix it?

Over the last week I have noticed more and more that my searches do not show up properly. Today only the first page of images actually show, the rest are blank spaces, but if I click they go to the image site. The rollover does not show either.
What can cause this, and how do I fix it? I have tried various safe settings but this has no eefect at all.
Thanks.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Why does only the first movement of a symphony play?

Similar Messages

Maybe you are looking for