Why does Opera mini 7.1 always fail to install on ...

Since saturday while i was on opera mini 7.1 jar version, the app exited itself and a lock symbol appeared. I switched off the phone and when i on it the app had disappeared didnt find it in the app settings as well so i tried to dwn it again but a msg keeps popping up 'opera mini 7.1 already exists replace' and Everytime i click yes and save to memory card it says unable to instal. I have cleared all the cache, dmgr and temp files on the C drive and my memory is 48MB AND for the memory card its 1.6GB I HAD a software update done recently as well

And it happens for every version of opera whether 4.5 etc

Similar Messages

  • Why does the setting of trackpad always changes everytime i turn off my Macbook pro?

    why does the setting of trackpad always changes everytime i turn off my Macbook Pro?

    Sure ,  just refer to:
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/HT3964

  • Why does my 1st gen iPad always turns itself off and goes back to the screen. Whether I'm reading news, iBooks, etc, suddenly it goes off.

    Why does my 1st gen iPad always turns itself off and goes back to the screen. Whether I'm reading news, iBooks, etc, suddenly it goes off.

    If that doesn't help, the battery may be dying and need replacement. See here (tap on Battery Replacement): http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Alternately, might consider start saving for a new iPad. The newest iPad 6 should come out in the next few months. When it does, sellers will want to get rid of old inventory with good deals.

  • Why does my mini ipad reset when I click the camera icon?

    Why does my mini ipad reset when I click the camera icon?

    Try doing a manual reset:
    Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
    If that does not work, restore your iPad: http://support.apple.com/kb/HT1414.

  • Why does my mini iPad not receive emails?

    Why does my mini iPad not receive email ?

    We need a bit more to go on than that please.
    Have you tried to reboot the app? Double tap the home button, when you see the previews for the apps on the screen, scroll sideways if needed to bring the mail app up on the screen. Flick it up and off the screen to close it. Then single tap the home button or tap on the home page preview to exit the mode.
    If that doesn't work, try to go into the settings, mail, contacts and calendars, delete and then re-add your mail info
    Beyond that we need more details to go on to offer help.

  • HT4623 Why does connecting to S/W download fails whether from the computer or iPad?

    Why does connecting to S/W download fails whether from the computer or iPad?

    Where are you trying to download? My App Store app is working just fine.
    First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Why does iOS 5.0.1 always say, my iCloud Password is incorrect, when i try to use my iCloud email account?

    Why does iOS 5.0.1 always say, my iCloud Password is incorrect, when i try to use my iCloud email account?
    Btw: The password works in all other issues.

    I GOT IT !
    JUST BE SURE UR DESCRIPTION IS NOT (f.E.) iCloud OR SO ON.
    THE DESCRIPTION MUST BE JUST LIKE UR EMAIL NAME !!!
    IF U GOT "[email protected]" => UR DESCRPTION MUST READ "MY-NAME"
    This is how it worked for me, so ...
    ... just hope it help´s
    greez

  • Why does mac mini with snow leopard download skype for windows instead of mac

    why does mac mini with snow leopard download skype for windows instead of mac ?

    Are you using this link?
    http://www.skype.com/en/download-skype/skype-for-mac/

  • HT6162 Hi guys, I downloaded this new iOS7.1 but it always fails to install. It says I am not connected to the Internet while I have all the network and second excuse it gives is that the software update is currently unavailable. Please help.

    Hi guys, I downloaded this new iOS7.1 but it always fails to install. It says I am not connected to the Internet while I have all the network and second excuse it gives is that the software update is currently unavailable. Please help.

    Hi Romantilizer,
    Hook your phone up to iTunes on the computer you sync with and do your update from there. This is a robust iOS release, and doing it OTA is not always successful. I tried on my iPhone a couple of times, and it aborted the update twice. Did it via the Mac, and it was fine.
    It takes a bit of time, so hook it up, make sure it is updating your phone, and then find something else to do for a couple of hours.
    Cheers,
    GB

  • Why does Captivate 2 not think I have Flash installed?

    Why does Captivate 2 not think I have Flash installed?  It will not start up even though I have the most recent version of Flash.  It tries to redirect me to the download page every time.

    The issue is actually due to the way all versions of Captivate prior to version 5 were coded. They were not able to understand the Flash Player numbering beyond a given version. Once that version of Flash Player is exceeded, they give the same error message as shown when your Flash Player version is too LOW.
    When Captivate 4 had this issue Adobe provided a download patch to resolve. But you have absolutely NO chance now of getting a fix for something as old as Cp2.

  • IOS 7.1 downloaded to my iPhone 4S (186 MB), but it always fails to install.

    iOS 7.1 downloaded to my iPhone 4S (186 MB), but it always fails to install.

    Hi EarlT,
    If you are having issues updating iOS on your iPhone over the air, you may want to try updating it directly from iTunes. You may find the following article helpful:
    Apple Support: Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    Regards,
    - Brenden

  • Why does a motion control unit constantly fail during config

    Why does a drive fail during config.... I am trying to control a machine using faulhaber motors (5 of them) with faulhaber controls, one drive fails during config (fatally fails) and it is not wired any different to any of the others... even with only 24v supply, it dies... Blue screen and restart of pc... the others all worked perfectly, with no fault. The process we are using for the troublesome drive is exactly the same... We are stuck, can anyone please help?

    thank you, but faulhaber are all on holiday, and I am really struggling..... tis only one unit and only when it is positioned in one place... checked all electrical connections, no shorts, no loose wires, even fails when just power and serial connected.... so not even motor problem.....

  • Why does iPad say connection to server failed when I am at home and have wi-fi, Why does iPad say connection to server failed when I am at home and have wi-fi

    Why does iPad and 4s iPhone say connection to server failed.  I have been getting mail until this started popping up going to beat with sledgehammer

    Hi -I was having the above problems on both my ipad and iphone,  and I trawled the internet for hours and hours trying to find a solution to this.....tried  resetting both devices,signing back in to the mail app, and did a full reset of both iphone and ipad., I removed the email account from both devices too.. I knew that the problem occurred after receiving an email- as it happened whilst opening the email- you might not have realised that's what it was at the time?.... I tried deleting the email from both phone and ipad, and hotmail was working fine on a webpage,it was JUST the mail app that was giving the  error messages..... I was receiving the above message and ' cannot send mail- an error occurred while sending this message'  and ' cannot get mail- the connection to the server has failed' then I suddenly realised that even though I had deleted the mail from both ipad and iphone the message was still in trash, so I emptied trash and made sure the mail was completely removed from my hotmail account ANYWHERE and then the problem disappeared.....I think an email I received was maybe corrupt- I hope this at least helps someone and saves you the hassle it caused me!
    Good luck!!

  • Why does the Flash player update push me to install McAfee Security Scan Plus?

    When Flash asks me if I want to update, it takes me to an Adobe page to update it, but there is a checkbox already checked to install McAfee Security Scan Plus. I already have an anti-virus program installed. Why does the flash update page assume that I want to install this software?

    Generally this occurs because there's a third-party plug-in that affects how the JavaScript on the page got executed.  Ghostery, AdBlock Pro and NoScript are common candidates.
    Under normal operating conditions, you should see an opt-out dialog like the one below.  While cost-recovery measure are a reality for a product that is tremendously expensive to develop and distribute free of charge, the intent is absolutely to allow you to opt out.
    If you want to avoid the download and installation experience for Flash altogether, switch to a browser that includes Flash Player as a built-in component, like Google Chrome or Internet Explorer on Windows 8 and higher.

  • Why does my window update history list 11 updates install status as PENDING?

    HISTORY: I recently (June 10, 2014) up
    graded the operating system (OS) on this computer from Windows 7 Home Premium 32 bit to Windows 7 Professional 32 bit. After the new OS was installed on this computer, the next step required that I run Windows Update. More than 150 updates were downloaded.
    Most of the updates were installed successfully, however, a few failed to install. The "Failed" updates were later downloaded and installed successfully. There were eleven (11) updates that were label as  "Pending", and was not effected
    by the running of Windows Update a second or third time. The Status of the "Pending" updates is still "Pending". My question is: "How do I get these Pending updates install successfully? The Importance ratings of the 11 Pending Updates
    is seven (7) "Recommended" and four (4) "Important". The error code that appears when I click the details button is 80242014.   The Pending Updates are listed below.
    UPDATE NUMBER
    IMPORTANCE
    INSTALLATION STATUS
    (KB2647753) Recommended Pending
    (KB982018) Recommended Pending
    (KB2913152) Recommended Pending
    (KB2532531) Important Pending
    (KB2925418) Important Pending
    (KB2732487) Recommended Pending
    (KB2229755) Recommended Pending
    (KB2923545) Recommended Pending
    (KB2515325) Recommended Pending
    (KB2953522) Important Pending
    (KB2912390) Important Pending

    Hi,
    This issue can be caused by security application block or corrupted system files.
    Please first run System restore to get your computer back to the point before Windows updates. Then follow these steps to check the issue.
    1. Reset Windows Update components with "MS Fixit 50202"
    How do I reset Windows Update components?
    http://support.microsoft.com/kb/971058
    2. Disable any security application protection installed on your computer;
    3. Check for updates (so the uninstalled updates will be re-presented to you)
    4. Install those updates that were Pending again (note, the Pending status will remain in the history, but since you have just uninstalled them, you can now install them again)
    5. Restart the computer to check the results.
    If the issue still persists, please post back the %windir%\windowsupdate.log
    here for our research.
    Kate Li
    TechNet Community Support

Maybe you are looking for

  • Set monitor settings to res too low for flat panel - reset w/o boot?

    Hello I wanted to play an old OS 9 game on my Powermac G4 (Sawtooth, 400 Mhz, OS 9.2.2 and 10.4.11), and for the sake of readability, wanted to set the monitor to the game's native 640x480. The monitor control panel (when booted under OS 9) allowed f

  • WPA2 Security and Recv Errors.

    Copy of a post I posted a couple of hours ago in the Airport Extreme 802.11n forum. As the issue could be MBP related I thought I'd post here too. Any (relevant) suggestions most welcome. Thanks. In the ongoing quest to try and find out as much as I

  • Use of MYSQL when installing Business Objects Enterprise XI 3.1

    Hello Team, I am quite new Business Objects and right now I am using Business Objects Enterprise XI 3.1. when installing BO XI 3.1, I was prompted to select the database server to be created. I chose MySQL. Now, I am curious to know the pupose/involv

  • Assist with my SQL Reporting Script

    I have started writing a HTML SQL reporting script based off of Jeffrey Hicks tutorial Here is my entire script: ###################START SCRIPT##################################### #requires -version 3.0 #Create a SQL Server report of said SQL envir

  • Workflow Builder Not Connecting to Database

    Hi, Just few days ago,I got Oracle workflow builder installed in my machine. When I am trying to connect to databse, It is running for hours to connect, but no response. I pasted the updated tnsnames file in C:\workflow\network\ADMIN directory...anyt