Why does Remote App no longer work since upgrading to IOS 6?

Since updating my Touch to IOS 6, I can no longer use the Remote App to connect to my itunes library on my iMac.  I have tried both homesharing and "add an itunes library" and both have failed.  I have been through all the posted support articles with no success.  By the way, I can still use my first generation IPAD to connect with no problems.

I have this problem also,
We have an iPad 2, iPod Touch, iPhone 4,4s and iMac. 
The printer is a HP LaserJet CP1525nw and is listed as a compatable AirPrint printer.
The two iPhones and iPad 2 were upgraded to IOS6 last week.
We wanted to print something out today and when selecting printer it came up with "No AirPrint Printers Found".
This happened on the Other iPhone and the iPad as well. However all the other devices that were not upgraded still work.
I have upgraded the firmware on the printer to the latest version, however this has not helped. I have restarted all devices as well as my network router multiple times to no avail.
Apple need to provide a fix as this provlem is evidently as a result of their IOS6 upgrade.

Similar Messages

  • Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)

    I am unable to use my Remote app 2.1.1 with my iTunes 10.2.1.
    I recently updated all software/firmware as follows:
    1st Gen iPad - iOS 4.3 (8F190)
    iTunes - 10.2.1 (1)
    Remote - 2.1.1
    I am using an iMac circa 2005 (6.1)
    Mac OS X 10.6.7
    2.33 Ghz Intel Core Duo; 2 GB 667 MHz DDR2 SDRAM
    Wirless Router: Netgear WNDR3400, SSIDs off, WMM enabled.
    I have turned on Home Sharing on both iTunes and the Remote app.
    I have made sure that both iMac and iPad are on same network.
    I have made sure that iTunes is allowing incoming connections through the firewall settings in system preferences.
    I have deleted and reinstalled both iTunes on the iMac and Remote app on the iPad.
    I have trashed the preferences for iTunes.
    I have gone to Settings on the iPad and turned on Home Sharing through the iPod app.
    I no longer see "Automatically search for iPods, iPhones, or iPads" in the iTunes preferences...ANYWHERE.
    I have reset the router.
    I have reinstalled iTunes 10.1.1 - didn't work, re-updated to 10.2.1
    Installed Mac OS X 10.6.7 combo update.
    Nothing seems to work.
    iTunes does not show my iPad when the Remote app is launched and gives me the 4 digit code to type in to pair it.
    Anyone else having this issue?
    Any solutions?
    Thank you,

    same issue iphone 4

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • Remote app no longer works with Yosemite.

    Since downloading Yosemite, my Remote app no longer works. Have also been having recurring problems with email security certificates.

    Same problem here after updating my iPad to iOS 6.1 and the Apple TV to the newest firmware. I open the remote app then I select Apple TV the screen switches to connecting to Apple TV but it never finishes it is stuck at connecting to Apple TV. The App has no problem finding the Apple TV but it seems unable to connect, home sharing is activated on the
    App, the iPad and the Apple TV.
    Tried resetting setting and factory restore on the Apple TV, deleting and installing the Remote App in my iPad 3 but the problem persist.
    On a twist the the Remote App on my iPhone 4S updated to iOS 6.1 works perfectly and it has no issues connecting to the Apple TV it seems to be an iPad issue. I will tried connecting to the Apple TV with an updated iPad 2 later and I will report back.

  • After I upgraded my iPhone to 7.1, my REMOTE app no longer works. Any ideas?

    After I upgraded my iPhone 5 to 7.1, my REMOTE app no longer seems to be connected to my Apple TV. Has anyone had and solved this problem?

    I rechecked each question you posed; I even turned off and turned back on the Apple TV and iTunes Home Sharing, deleted the app and redownloaded it several times. I am still getting the message on my phone to turn on Home Sharing in iTunes on my computer or on Apple TV. I can't think of any changes I made since the REMOTE app worked except I downloaded the iOS 7.1. About a week before uploading the new iOS, I moved my router. Could this have been a cause of my problem? Everything else seems to work. Do you have any other suggestions? Or do you think the REMOTE app isn't working correctly with the new iOS 71.? Thank you for responding. This is above this Nana's head.

  • Remote app no longer works

    I have an iPod Touch ios 4.2.1   and an imac osx 10.8.2
    The 'remote ' function stopped working. I followed the advice to remove the remote app and re-install it. When I tried to reinstall it said I needed ios 5 on my ipod! I can't se how to (or whether) Ican update the ios on my ipod and it won't re-install the app from my itunes as it says I need ios 5 to run it!!! What ion earth is goingon?
    Chiggsy11

    Same problem here after updating my iPad to iOS 6.1 and the Apple TV to the newest firmware. I open the remote app then I select Apple TV the screen switches to connecting to Apple TV but it never finishes it is stuck at connecting to Apple TV. The App has no problem finding the Apple TV but it seems unable to connect, home sharing is activated on the
    App, the iPad and the Apple TV.
    Tried resetting setting and factory restore on the Apple TV, deleting and installing the Remote App in my iPad 3 but the problem persist.
    On a twist the the Remote App on my iPhone 4S updated to iOS 6.1 works perfectly and it has no issues connecting to the Apple TV it seems to be an iPad issue. I will tried connecting to the Apple TV with an updated iPad 2 later and I will report back.

  • Why does the Autofill no longer work on my macbook

    Why is the autofill no longer working on my macbook?

    Have you tried connecting to your computer and sync using iTunes? If it will sync that way, the means the problem is the wireless sync. One step in the troubleshooting process. You also might want to consider posting here.
    iPad Community

  • Brand new IPOD Touch Apps no longer work after upgrading software

    I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
    Message was edited by: 2009 IPOD TOUCH

    I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
    The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
    Message was edited by: IPatronius

  • HT1665 Why does my ihome no longer work properly since my iPod update

    My ihome no longer works properly since I updated my iPod to the most current software update. Is there a fix?

    Sometimes thisworks:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    However,sometimes an iOS update breaks compatibility and you have to wait for either an iOS update or and update to the iHome firmware. Go to iHome's support site

  • Keynote remote app no longer working with keynote for ipad

    noticed after upgrading that the keynote remote does not pair with keynote for the ipad.  Any suggestion on a resolution or anyone else experiencing this issue?

    I didn't realize until I went to a class to lecture in front of a couple hundred students that what worked on Friday no longer worked on Monday.  (I upgraded to iOS 5 over the weekend.)  My iPad with lecture slides was plugged in 25 feet away.  I finally recruited a student to tap the iPad screen when I needed the next slide.  A nightmare.  What is usually slick and seamless was a wreck. 
    Here's my deal.  My remote app works fine at home where my iPod Touch and iPad are on the same wifi network.  At school they're on different networks for some reason.  Bluetooth doesn't work anywhere.  So Apple needs to find this bug and fix it.  I can't believe whoever is responsible for this didn't test this out before they released iOS 5.  Sheesh. 

  • IPhone remote app no longer working after iPhone update to version 4.2.1

    I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
    I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
    After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
    "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
    Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
    Home sharing is enabled on all the Apple TV devices
    I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
    This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
    I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
    Suggestions ?

    Update:
    Issue is still occuring, after resetting wireless router.
    Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

  • Why does my ipod no longer work with my alpine car stereo

    my ipod connects directly to my alpine car stereo and up til now it has worked great. i recently synced my ipod to my computer and i think it updated the software on my ipod and now my ipod no longer works with my alpine stereo. what is up? did apple change something that would make my ipod no longer compatible with my car stereo? if so, what do i do? i have about $1000 invested in my car stereo and ipod specifically for car use. this is a serious issue for me! i just want my ipod to work like it did…
    i just connected my friends ipod and it works fine. he has version 1.1.1 software on his. i have version 2.3 on mine. since my ipod works fine by itself i’m assuming that the incompatibility between my ipod and my alpine is due to the software update.
    here again, what do i do? how can i get an older version of software back on to my ipod?
    ipod v.2.3   Mac OS X (10.4.9)  

    what kind of connection do you have? do you use the ipod 30 pin cable that connects directly to the head unit? it so, maybe you could get help on the alpine site, or a similar site?it could just be a bad connection. you may just have to go oldschool and use rca cables and plug those in...

  • Why does my button no longer work in Flash Player 8?

    Hi,
    I have built a site in Flash MX a while ago. Now I’d
    like to upgrade things a bit while testing the new Adobe Flash CS3.
    To be able to use a new function (“anti-alias for
    readability”) the program warns me that “this feature
    is not supported by Flash Player 6. To use this feature, you must
    target Flash player 8.”
    So I change the setting to Flash Player 8, leaving
    Actionscript to version 2.0.
    However, now one of my main menu buttons no longer works!
    When I change settings back to Flash Player 6, things are fine
    again. What am I overlooking?
    Below is the script for the button (which has an instance
    name). Does anything change with the actionscript in CS3?
    Thanks for any advise!
    on (rollOver) {
    gotoAndPlay("s1");
    on (releaseOutside, rollOut) {
    gotoAndPlay("s2");
    on (release) {
    _root.Play();

    That's it! It works fine again. Thanks a lot, you made my
    night!

  • TS1741 I have home sharing on both my computer and my iPad remote app. But the remote app no longer works.

    My remote app. Use to work perfect. It quit working and now I get a blue screen telling me o turn on home sharing. I've done that on both my mc and iPad with no luck getting the remote and iTunes to pair. Any suggestions?

    in remote app click on the
    lower left corner on the text
    top of the context menu click devices
    choose the appletv rather then your shared lib in the list
    if you are trying to view a movie that is located on your ipad on your tv using the appletv then
    you should use airplay mirror not the remote app

  • Samsung remote app no longer working

    Bought Samsung SMART tv (Internet) and downloaded the Samsung Remote app onto my iPad-all worked well for 2 weeks then suddenly the app says No Device. I know the Internet connection on the tv is ok. Any ideas anyone? Thanks

    On the Samsung try:
    Menu > system (scroll down to) network control
    May show "on" ... Select this as there more 'inside'
    Devices associated with TV are listed.
    I had the same problem and my iPad was listed here as "denied"
    Apparently the tv will reject until this is reset.
    Hope it helps.

Maybe you are looking for