Why does sound only come out of 1 speaker when I dock my iPod?

My son's Ipod only plays sound out of I speaker. When I dock the ipod on his ihome radio or my sony radio, sound only comes out of the left speaker. When I put other ipods on the same docks i get sound out of both speakers. It is just this one ipod that won't produce sound out of both speakers, no matter what docking station I use.

Likely it is a hardware issue for the iPod, you need to bring it for service

Similar Messages

  • Sound only coming out of 1 speaker at startup

    I recently bought an Maudio to replace my x-fi, and the sound is great, and everything works fine, except when I start up, sound only comes out of 1 speaker.  It isn't always the left or right, it changes. When I go into mixer and change the volume either up or down, sound returns to the missing speaker. Has anyone else had a similar problem?

    See thread.
    Worked around by running amixer to change volume levels in /etc/rc.local, IIRC.

  • Sound only come out one earphone.

    Hello,
    The sound in my iPod only comes out the left speaker/headphone. If I jiggle the connection to the iPod a bit it will fix it but if I don't continue you to hold it it will go back to just coming of the left earphone/speaker. It is not the headphones because it does it on any headphones and in the car. Anyone know how to fix this? Thanks.

    You might want to send your iPod in for service (if your iPod is under warranty).
    You can arrange an iPod service request online here:
    iPod service
    -Kylene

  • I hooked up external speakers and the sound will only come out of 1 speaker

    I have an electronic karaoke system on my HP envy dv7 Notebook and I just bought 2 new Mackey Powered Speakers and a new Mackey ProFX12 mixing board.   I can only get sound to come out of 1 speaker.   How do I get the sound to come out of the Right and the Left at the same time? Thanks for any input or help you can provide.  

    You may have dust or a small object in your headphone jack. You can purchase cans of air from computing stores that can clear any dust that may be causing the problem. If that doesn't work then a larger object may have damaged part of the jack at which point it would be advised to visit your local Genius Bar and see what repairs they can offer. Try not to insert any other objects especially ones with sharp edges into the jack as this often creates further damage. Hope everything is working again soon.

  • Why does my PDF come out rotated when I haven't selected that?

    Why does my PDF come out rotated when I haven't selected that?

    What you are trying to do is a process that we call “refrying a PDF file,” a process that we at Adobe most strongly discourage. There are facilities within Acrobat itself that allow you to remove objects and crop pages without having to ruin the PDF by creating PostScript and then distilling that back into PDF, a potentially very lossy process. You lose all color management, all live transparency, and could have font problems in the resultant PDF file.
    The Adobe PDF PostScript Printer Driver Instance is parameterized by joboptions set in its properties. These properties have a parameter for page rotation. If the options specify automatic page rotation, you may be getting these unexpected results on the basis of Distiller's analysis of each page and trying to second guess the orientation. You should also be aware that the PostScript generated by Acrobat (and Reader) is optimized for printing on a PostScript device, not for generation of PDF by distillation.
              - Dov

  • HT201343 my video plays but the sound only comes out of my computer not my tv???

    my video plays but the sound only comes out of my computer not my tv???

    I have tried to connect and Jambox and have the same problem; bluetooth speakers are connected and chosen but sound comes out of computer speakers.

  • IdeaTab s6000 F - Sound only comes from the left side when using headphones

    I have tried four different headphones including a set of Beats and the sound only comes out of the left side. It just started doing this three-four days ago. I have tried resetting the tablet back to factory but it did not work. Is there any way to get this to work? I would hate to have to return it as I love the tablet besides this one issue. 

    Hi Cory74,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that Audio is not working as expected from right side in your S6000-F Tablet even after performing the Factory reset, as the issue persists this seems to be hardware related. I would Strongly Suggest Calling Technical Support for Assistance to get the details of nearest Authorized Service Center to get the issue analyzed.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Why is does audio only come out of the left speaker when I press the latency button....?!?!

    Hello
    I have a small problem which I hope someone can advise me on ......
    Everytine I press the Latecny button on Logic 9 the audio will stop coming out of the LEFT and RIGHT speakers and only come out of the LEFT speaker ?
    Audio sent out of DAW --------> Mixng Deck  ------> back into Soundcard via SPDIF (digital) on inputs 9/10
    I am sening al my sounds out of the computer to be summed on a mixing decks and then the 2 channles of audio from the deck is coming back into my soundcard as an digital a signle on INPUTS 9/10.
    Can anyone please advise ..........!?!

    Might want to read on what Low Latency mode does + why and when you should use it.
    It's basically only used in realtime monitorinr when recording and/or when recording softsynths.
    By reading the docs you should be able to figure out why the right side is being muted.
    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=41%26se ction=2%26tasks=true
    Be sure software monitoring is Off when recording the summed input.

  • Why is my bluetooth speaker connected but sound only comes out of the computer speakers?

    My bluetooth speaker (JBL Charge 2) is shown as "connected in the blu tooth section of the task bar. I have also gone to system preferences and the speakers are also shown to be connected and chosen as the main speakers. However, no sound comes out of the bluetooth speaker but rather the sounds still comes out of the computer. speakers. I have tried connecting, reconnecting, and restarting computer. The bluetooth speaker is also shown as connected in bluetooth preferences. What is wrong?

    I have tried to connect and Jambox and have the same problem; bluetooth speakers are connected and chosen but sound comes out of computer speakers.

  • Sound only comes out from the right ear/head phone. :((

    My iTouch was working perfectly fine til it was connected to the school speaker for my dance. When I used it afterwards (with my headphones), the sound only came out from the right phone. I tried using my spare earphones and still no sound from the left. The headphones/earphones are working fine as I tested it with my laptop and mom's iPhone. So the real problem's with my iTouch!
    What do I do? I tried syncing it to iTunes, even resetting it... but nothing! HELP. :((

    If you connect your iPod with your computer, and if you can hear from both channels, that it is clearly something wrong with the earphone jack, there are few cases reported the dust in the earphone (metal parts?) causing the problem.

  • Vocals will only come out of left speaker

    When recording vocals in GB09 sound will only come out of my left monitor. This is the only program that does this. What are some settings that I can check?

    When you first create your 'real instrument' track the default setting is 'stereo'. However, you are inputting a 'mono' signal (your mic) so it will only appear out of one side. In the lower right corner of the inspector where it says 'input source' click on the drop down and switch the setting to 'mono' . Select either mono 1 or mono 2. You should now hear your vocals out of both sides!

  • I need help getting sound to come out of my TV when using HDMI. Any solutions?

    I'm able to pull up my picture when connecting my HDMI cable to my Macbook pro...however I can't get the sound to come out of my Toshiba TV.  When I go under system preferences, then sound and select my Toshiba TV as an option.  It says it has no output controls.  I fiddled with my sound setting in my TV and stil no luck.   Does anyone know any solutions for this problem.  Help is greatly appreciated.

    Hey jbarwins
    Check to make sure that you are up to date on your computer. Another recommendation would be to try a different cable and also reset the NVRAM on your computer.
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    OS X Mountain Lion: Use a television as a display
    http://support.apple.com/kb/HT1339
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Why does a skull come up on the screen when i turn the ipor touch on. it wont go away. how do i get rid of it?

    why does a skull come up when the ipod touch is turned on. it wont go away how do i get rid of it?

    Someone before you must have done it. Connect your iPod touch with your computer. In iTunes, under Devices, select your iPod touch, click Restore button and set up your device. Everything should get back to normal.

  • Why do my pics come out blue and hazy when i use my flash on my phone

    Is there something i can do to keep my  pics come out blue and hazy when i have my flash on?

    It could be the case you are using.  If your iPhone is in a case, take it out of the case and try taking a flash photo again.  If it comes out ok, you may want to get another case.  Look for a case with a larger camera hole.  If you are using a transparent case make sure it is painted black around the camera hole.

  • Sound only comes out from earphones

    Sound only when using earphones - can  you tell me what the problem could be. 

    When you remove the earphones and try to raise or lower the volume with the buttons, what is appearing on the screen? Do you see the speaker picture and the volume raise and lower? Just above the speaker, what does it say? If it doesn't say ringer, then there is something obstructing the headphone jack. Try inserting and removing the headphones a couple of times. If that doesn't help, then use a toothpick and see if you can remove any lint in the headphone jack. Generally a small piece of link will cover the sensor that tells the phone the headphones are plugged in.

Maybe you are looking for

  • Regarding internal table

    Hi ,      i have an internal table DATA: BEGIN OF tbl_infile OCCURS 0,          Aufnr(12) type c,          budat(8) TYPE c,          tubes(13) type c,          srap(13) type c,          batches(13) type c,          runmin(13) type c,          stopmin

  • F-32 ( User Exit / BTE ) Remove line items depending on condition

    Hi Gurus, When i run F-32 transaction, before the line items are displayed  I need to remove certain line items depending on some condition. Is there any user exit or BTE to do that ? Avi

  • More Bars - No service

    Working in Dutchess county my AT&T signal is very spotty, usually 1 to 2 bars. Recently I have been getting 5 bars, but no service. Meaing, I have 5 bars but if I attempt to make a call, i get "Call Failed", or, if it goes through, I hear "The number

  • Recently played Smart Playlist not working

    I read here that this was a problem back in 2005, but I'm only encountering it now with the latest iTunes upgrade. I noticed today that my Recently Played smart playlist did not update for all the songs I played today. It shows only 1 song played tod

  • Reset/change password error - cannot log in to builder - HELP!

    I'm encountering the same problem I described some time ago here: Reset/change password error - cannot log in to builder Briefly, the builder tells me I must change my password. When I attempt to do so, the password change page displays a null userna