Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is  turned  off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

Similar Messages

  • HT4993 why does my internet not work when not connected to wifi?

    why does my internet not work when not connected to wifi

    Hi farmgirl0812,
    Thanks for using Apple Support Communities.  This article has steps to try if you are unable to connect to a cellular network:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Ari

  • Why does Apogee Jam not work with the Ipod Touch 4G

    Hi,
    I have a Apogge Jam an it works fine with my Mac Book, but it does not seem to be compatible with my Ipod Touch 4g.
    Only the Gibbson L&M app recognize the Apogee Jam, but no other App (Ampkit, ....) :-((
    With the IPhone 4 it shall work, can tell me anybody why Apogee Jam is not compatible with the Ipod Touch 4g (
    although the Gibson-App works)?
    Is there perhaps still other Apps which work with the Ipod Touch and Apogge Jam?
    Thanks
    Michael

    I cannot answer the specifics, but I would guess it is a software issue because Griffin iTalk app will cooperate with the Apogee JAM on an iPod Touch 4g running iOS5.  If this app can do it, then one would presume the other apps could be updated to do it also.
    From last week up until yesterday, Apogee actually listed the 4G Touch as a compatible device with the JAM.
    Apparently there was some confusion about Garageband now supporting iPod Touch and its functionality with JAM.

  • Why does my printer not work when i plug in the internet? (ethernet)

    hey guys,
    i have the Mac connected to a large digital printer via the ethernet connection. works fine, no problems untill i plug in the internet. I get an error message in my software and can't print any jobs, but the internet works fine.
    I have a feeling that its a network problem, but don't want to mess around too much with the settings.
    This is a company internet connection.
    if anyone could advise of the possible network settings, I would be very greatful.
    thanks again.

    Your Mac sends traffic to the interface at the top of the list in
    System Preferences > Network
    When you plug in the second Ethernet, that Interface jumps to the top of the list and all traffic goes there.
    The solution is to cable that Printer to your Router, not to your Mac.
    Alternatively, you could add a small Switch and connect your Mac and the printer to it.
    If you really want to you can use Internet Sharing to add the Ethernet port going to the Printer to the Network connacted to the Internet.

  • Why does my ipod not work when i plug it into the wall and work when i plug it into my computer?

    hello?

    What do you mean by works?  Do you mean the battery chares on the computr but not with the wall charger?
    Did the wall charger ever charge the iPod?

  • Why does "enclosing folder" not work from the SEARCH window?

    I do a command+F search.
    Command+2 to view as list rather than groups
    and then sort by date modified.
    When I find the file/folder I want I'd really like to do a command+[up arrow] which in the GO menu is a valid command.
    Why does this work in finder windows but not in the search window?
    I'm not using spotlight, just the good old command+F
    This used to work in Sherlock 1 [using command+E] and when you opened the enclosing window, the file was already hi-lighted, faster to locate and saved mousing.

    You'll note that in the Go menu that command is grayed out meaning it's not active in the search results display.
    If you upgrad to Leopard then you can go to the Finder's View menu and select "Show Path Bar." The full path to any selected item in the Finder's window will be displayed in a path bar in the lower portion of the window. You can then double-click on any displayed folder to open a window on that folder.

  • Why does my ipad not work when powered up and screen just lights up dark blue?

    IPad Model A1219 does not respond when powered up, screen barely lights up just a dark blue screen thats it. will not do anything else, why?

    I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
    Attachments:
    Pass_a_Reference.vi ‏11 KB
    GL_Flicker_mod.vi ‏66 KB

  • Why does my cursor not work when hovering in certain sites?

    My cursor does not bring up information when i hover in sites like appointment plus. I use safari, when i downloaded firefox and signed on the cursor worked, is there something i am missing? I prefer safari, but will switch to firefox if i have to.
    At my office i have an old mac with snow leopard and the cursor works on that while on safari. my home computer has lion and it doesn't work

    Your Mac sends traffic to the interface at the top of the list in
    System Preferences > Network
    When you plug in the second Ethernet, that Interface jumps to the top of the list and all traffic goes there.
    The solution is to cable that Printer to your Router, not to your Mac.
    Alternatively, you could add a small Switch and connect your Mac and the printer to it.
    If you really want to you can use Internet Sharing to add the Ethernet port going to the Printer to the Network connacted to the Internet.

  • Why does my .vi not work when used as a sub vi

    I have a vi that produces a picture on the front panel. Displayed in the picture are solid grey levels for testing. Two grey levels are chosen inside the vi and then the picture flickers betwen the two. When I run the vi by itself it runs wonderfully, but when I run it as a sub vi it does not work. Even when I just place the sub vi in the block diagram and connect all of the controls and indicators up it doesn't work.When I use the highlighter it shows that the control values go into the sub vi and the sub vi lights up, but there is nothing output from the sub vi to the wired indicators. When I open up the Block diagram of the original vi from which the sub vi came, and highlight it while running the subvi, it
    shows that it is working with information running to all of the indicators. If I start a new program with only the sub vi in the block diagram and all of the controls and indicators connected, should it not behave as the sub vi? I will attach the vi that I am using as a sub vi, and I welcome anyone to place it in the block diagram of a new vi, connect all of the controls and indicators up and see if it works. I know that there is something completely obviopus that I am missing, but I can't see it. Any help would be greatly appreciated.
    Attachments:
    GL_Flicker.vi ‏74 KB

    I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
    Attachments:
    Pass_a_Reference.vi ‏11 KB
    GL_Flicker_mod.vi ‏66 KB

  • Why does diadem intellisense not work when using scriptinclude or for global object

    I have a script with a different classes in it (scripted 1).  When I create an object of a class in the script 1 intellisense works.  Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object.  But when I write another script and use scriptinclude(scripted 1) the intellisense does not work.  I also tried a global object and intesllisense does not work.  Is there a way to get intellisense to work when using scriptinclude?  I am working with version 2012. 

    Here is more information on the issue.
    I have a script with a different classes in it (scripted 1).  When I create an object of a class in the script 1 intellisense works.  Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object.  But when I write another script and use scriptinclude(scripted 1) the intellisense does not work.  I also tried a global object and intesllisense does not work.  Is there a way to get intellisense to work when using scriptinclude?  I am working with version 2012. 
    'Test.vbs
    class test
        public function test1()
             msgbox("test1")
        end function
        public function test2()
             msgbox("test2")
        end function
    end class
    'now create a object of the class
    dim oTest
    set oTest=new Test
    'now when you type oTest. you get the following functions to choose from
    oTest.test1
            .test2
    Now if you remove the object from Test.vbs and create a main program with scriptinclude(Test.vbs) it will not show the two functions
    'Main.vbs
    Option Explicit  'Forces the explicit declaration of all the variables in a script.
    call scriptinclude("c:\1atmp\Test.vbs")
    dim oTest
    set oTest=new test
    'now when you type oTest. it shows none of the functions in the object oTest
    oTest.

  • Why does this script not work when run with osascript cli?

    I wrote the following to interface with geektool to display a list of todo's on my desktop (i'm sure it's been done elsewhere, but I wanted to try it myself). I had it working fine until I tried ordering the output to place the highest priority items at the top of the list. The following code works properly during development in Script Editor, but when geektool launches the command using osascript ~/Library/Scripts/todos.scpt it only displays the initial "TODOS:" without displaying the rest of the info. Searching the Applescript Release notes, I found that some versions of Applescript 1.8 had issues with null characters when using the osascript cli, however, I'm running 1.10.7 so it shouldn't be an issue (and I'm not sure how to check for null characters in Applescript even if it were). Anybody have any ideas on what's going on here?
    set output to {"TODOS:
    set highpri to {}
    set medium to {}
    set low to {}
    set nada to {}
    tell application "iCal"
    repeat with i in calendars
    repeat with j in todos of i
    if (completion date of j as string) is equal to "" then
    if priority of j as string is equal to "high priority" then
    copy summary of j & "
    " to end of highpri
    end if
    if priority of j as string is equal to "medium priority" then
    copy summary of j & "
    " to end of medium
    end if
    if priority of j as string is equal to "low priority" then
    copy summary of j & "
    " to end of low
    end if
    if priority of j as string is equal to "no priority" then
    copy summary of j & "
    " to end of nada
    end if
    end if
    end repeat
    end repeat
    end tell
    return (output & highpri & medium & low & nada) as string

    well, i'd been pulling my hair out for quite a while with this and decided it was time to ask for help, but I thought I'd give it one last shot and found a resolution almost immediately. I figured that problem had to be caused by the way applescript was concatenating the lists, so I got rid of the lists completely and it still wouldn't work. This convinced me that it must be newline related since that was the only special character left in the string. I opened up the script in vi, but the default compiled script format is not human readable. The osascript man page indicated that it would accept both compiled and text scripts, so I gave it a try, and osascript handled the raw text file wonderfully.

  • Why does Apple Bluetooth not work? iPad iPhone and iMac

    Quick post, Bluetooth won't work on my new ipad air, trying to connect to sound bar, works on all other non apple devices!?
    Have iMac, ipad 2, ipad air and iPhone, non of the apple devices have ever worked properly when trying to use Bluetooth?
    Can someone help, already tried apples troubleshooting, no joy!
    Apple seriously get on this, your products are way too expensive for basic features not to be working!?

    There are various issues, both accessing this forum using iDevices as well as even on the PC/Mac side. The issues seems to be the fault of the forum software itself (Jive software) so there's not much that can be done about it other than wait for fixes (which we've been doing for quite awhile now).

  • Why does Live View not work with the following: @media only screen and (max-width: 480px)?

    When I use the above media query in my stylesheet Live View ceases to update the viewport.  I have to update it manually each time I add or change a style.  This is not the case when I use styles under a common tablet sized query @media only screen and (max-width: 768px), or when there is no query at all.  Is this a bug or is there something I am missing here? 

    Code errors might account for the discrepancy. Validate your code and fix any reported errors.
    CSS - http://jigsaw.w3.org/css-validator/
    HTML - http://validator.w3.org/
    Nancy O.

  • ICal alarms not working when my mac has been off during time of alarm.

    Surely there is a way to make all the missed alarms go off when I do turn my mac on? Please help!

    To clarify, I set an alarm for 10am.
    My Mac is off all night until 11am when I turn it on. When I do turn it on I do not get the 10am alarm!
    Am using Macbook Pro 15" OS X 10.6.8

  • Why Does Dynamic Link Not Work

    I purchased the CS5 Adobe Production Premium.  I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere.  When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
    Adobe Dynamic Link Requires Adobe Production Premium.
    Since I own production premium, I do not know why I am getting this message.  I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message.  What can I do to get Dynamic Link Working.

    Thank you for the tip.  Could you possibly tell me how to deactivate and
    then reactivate the suite.  I am using a Macbook Pro laptop running OS
    10.6.4.  I do not even know where to start.
    From:   Colin Brougham <[email protected]>
    To:     Dan Seanor <[email protected]>
    Date:   03/15/2011 09:55 AM
    Subject:        Why Does Dynamic Link Not Work
    Deactivate the software (not uninstall), and then reactivate the suite.
    This often fixes this. You can opt to leave the serial number on the
    system; no need to clear it and re-enter it.

Maybe you are looking for

  • Error Validation In PO Creation

    Hi Gurus, I'm trying to create a PO in transaction ME21N. There are no validation on vendor and company code mapping, error message should occur. This error should come up upon PO creation since the vendor is not created for company code. How can I d

  • Obviously confused about input and output resolutions

    I have a screen recording (using iShowU HD Pro). Here's the info of that file: Dimensions: 1024x812 Codecs: Apple Intermediate Codec Color profile: HD (1-1-1) Duration 2:07 Total bit Rate: 19,498 I import the file to FCE and place it on the timeline,

  • Rule+ in transformations

    hi,     can any body explain me what is rule+ and what is rule- in transformations and what is the use?. i have tried adding the object and its populating to the target . but what is the use of it? regards, manju

  • Macbook Pro Fan noise

    I have had a 2012 macbookpro (15 inch) since they came out, and just now, I have begun to notice fan noise sort of like a faint grinding sound. It only occurs when I tilt the computer to the left, and then back to a level position, or fowards and bac

  • Can I update iOS 5 without connecting to PC?

    Can I update to ios5 without connecting to PC?