Why does the new OS X update cause Safari to freeze when adding a bookmark?

Just installed the latest OS X update and now every time I attempt to add a bookmark Safari freezes (Not Responding) and the color wheel just spins and spins until I force the program closed. OS X 10.9.5 / MacMini

Try installing OS X Mavericks 10.9.5 combo update.
http://support.apple.com/kb/DL1760?viewlocale=en_US&locale=en_US

Similar Messages

  • Why does the new version of iTunes cause my CPU to spike?

    I've downloaded the newest version of iTunes (and even reinstalled it, to be sure).  [Version 10.7.0.21].
    When it is idle, or at least, when it is supposed to be idle, it causes my CPUs to run up quite a load.  Up to 27% from 4%.  This appears to be centered on the program AppleMobileDeviceService.exe, which accounts for about 25% of my overall processor load.
    The processors cool off and quiet down as soon as I end that task. 
    Is this a known bug in the new app, or is this just me?
    -Steve

    I just found out from another post on how you can fix the issue.  Open QuickTime Player on your computer and go to Edit >> Preferences >> QuickTime Preferences.  Once your in QuickTime Preferences, click on the "Advanced" tab then uncheck the box that says "Enable Direct3D video acceleration".  I tried this and it seemed to solve my problem.  Hope it works for you! 

  • Why does the new 61XL say it is for PSC 2510 when it doesn't fit??

    I have just purchased a new ink cartridge for my PSC 2510, and was advised to get the 61XL (I usually use the 56) which lists on the side that it is compatible with the 2510. However I have just tried to intall it but there is no way that I can get it to fit as the two tabs sticking up at the front go all the way to the sides of the cartridge as opposed to having a gap on each side on the old one, and this stops it from going all the way in, so I can close the tab over it... Can somebody tell me how this is supposed to fit or have I just wasted $50 for nothing???

    Hi,
    Sorry you bought a wrong cartridge, it is not compatible with your printer PSC 2510 , it is compatible with HP Deskjet 2510 All-in-One Printer. Please check the following list:
       http://www8.hp.com/au/en/products/oas/product-detail.html?oid=4024150#!tab=compatible_hosts  
    PSC and Deskjet are two different lines of printers.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Why with the new iOS 7 update does my music rewind a second once I unlock my phone? This is really annoying and they should fix it

    Why with the new iOS 7 update does my music rewind a second once I unlock my phone? This is really annoying and they should fix it

    Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion.  There should be a row of icons at the top of a grey field.  if the quarter-moon icon is bright white, tap it.  If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • Why does the new version not have back-up disc in the library file? And how do I fix it?

    Why does the new version of i-tunes not have back-up to disc in the library file? And how do I fix it?

    Fast backup for iTunes library  (Windows)
    Grab SyncToy  2.1, a free tool from MS. This can be used to copy your entire iTunes library (& other important data folders) onto another hard drive or network share. You can then use SyncToy periodically to synchronise or echo your library to the backup. A preview will show which files need to be updated giving you a chance to spot unexpected changes and during the run only the new or updated files will be copied saving lots of time.
    If your media is all organised below the main iTunes folder then you should also be able to open the backup library on any system running the same version of iTunes, regardless of the drive letter or path it appears on.
    Step-by-step guide to using SyncToy.
    tt2

  • Why does the new Itunes freeze/do nothing when i click on my Ipod touch icon ?

    Why does the new Itunes freeze when i click on my Ipod touch icon to manage my content? All buttones, video, tv, info, music, they all do nothing. i was only able to sync by bringing up the old sidebar. Is this a software glitch, or am i missing a step? I just spent two days reorganizing and labeling all my music for the new itunes, and had to restore my ipod so i could upload my new library. i know what is supposed to come up when you click on the music or info tabs, but nothing happens, only the eject button works. whats going on?

    The screen is telling you to connect the iPod to your computer with iTunes with the USB connector.  iTunes should open and give you instructions as to what to do.  Whatyou need to need to do is to restore the iPod via iTunes.

  • Why does the new version 5 of firefox show up all the graphics on web sites with a huge wide black border?

    Why does the new version 5 of firefox show up all the graphics on my web sites with a huge wide black border? They should be narrow and yellow!! I use iWeb for my web sites on an AppleMac iMac 22" wide screen.

    That is unfortunately a bug only in Firefox 5 and will be fixed in Firefox 6 (Aug).
    See:
    * http://forums.mozillazine.org/viewtopic.php?f=25&t=2240429

  • Why does the new MacBook Pro 13 no longer come with a graphics card?

    Why does the new MacBook Pro no longer come with a graphics card?  Or at least make it so you can opt for one.

    I know how you feel. Your MacBook Pro has integrated graphics 384 MB or 512 MB. If you are a gamer, creative professional or just want more VRAM get a 15 inch MacBook Pro with up to 1 gig of VRAM or a windows gaming laptop with up to 16 gigs of VRAM (a ridiculous amount!). If you get a windows pc, you can always install virtual box. There is no point in buying a 13 inch MacBook Pro unless you need a lightweight laptop with all of the extra "goodies". There is also no possible way to change the graphics unless you know how to "unhook" the card from the processor and install a new one. Sorry for the inconvenience.

  • Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC?

    Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC? How do I adjust settings to stop this from happening?

    Hi,
    This folder is probably treated as a program to run at startup.
    So you will have to look at the places where such programs are referenced.
    For instance, you may have a shortcut to that folder in your Start Menu > Startup.
    Or it may be in the Registry.
    Click on Start >  Execute, the type msconfig and click OK.
    This will show you in the Startup tab all the programs launched at startup.
    Astugev

  • HT5622 why does the wrong apple id come up on my iphone when I try to use apple app store?  how do I change it to the correct apple id?

    Why does the wrong apple id come up on my iphone when i try to use apple app store?  How do I change it to the correct apple id?

    Settings > iTunes and App Store > Apple ID = Sign Out... Then Sign In using the preferred Apple ID.
    It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID

  • Why after the new 5.1 update when the iPhone locks and sleeps the wifi goes what appears to be off and it 3G comes on?

    After the new update 5.1 whenever the iPhone locks and sleeps it changes from wifi to 3G.  Before the update whenever even in the lock screen the wifi bars were strong and seemed as if it's working even when the phones asleep. Now with the new 5.1 update in lock screen after the phones been asleep for a minute or two it shows 3G then like after 5 seconds or so the wifi comes on. 

    For some reason, today whenever I wake my phone from sleep the wifi seems to be running.  A few days ago when I first posted the 3G would be on then a few seconds later it would change to wifi.  Does this mean it's transferring data in my pocket all morning so far?

  • Why does the new update add a jquery-2.0.3.min.js file?

    So I updated adobe edge and instead of getting improvements I got problems. Whenever I publish my file it ads a jquery-2.0.3.min.js file that is so heavy that now my file is more 60kb.
    My file used to be 17kb.
    How can I change the publish settings so that I only have 3 javascript files=  edge.js, edgeActions.js, and an edgePreload.js
    Which were the original javascript files. It doesn't even publish a preloader anymore.
    What can I do?

    The old runtime used to depend on jQuery, however the new one does not. That's why on upgrade, jQuery is added as a dependency in the upgraded project as it might be used in the scripts. There are two options available:
    1. If you are not really using jQuery, then you can delete jQuery from the scripts section, preview and test the movie and publish. It will not have any jQuery dependency in this case. Please note that the new runtime has the support for basic selectors and some basic jQuery APIs (Adobe Edge Animate CC JavaScript API), if your use of jQuery is limited to these, then also you can get rid of jQuery dependency from the upgraded project.
    2. If you are using jQuery, then you have the option of using jQuery from the CDN. You can remove the local jQuery dependency and add a dependency by specifying a CDN URL for jQuery. We are looking for options to make this flow easier.
    Let us know if you need any other help.
    -Dharmendra

  • Why does the new update not recognize my new charger that i bought for my iphone ? it worked before but not anymore !!!

    i recently bought a new charger 2 months ago at best buy . (black friday sale) ! it worked so perfectly fine until today . i guess it's the new update ?! i don't really like it because the charger is a really good one . my warranty expired in december , and my charger burnt out like the other two chargers i had    ....

    Apple tried making it so iOS only allows "made for iPhone devices". You will have to get a different cable in order for it to work again.
    If you need just the USB section of it, amazon sells a nice cable, for a few bucks less than apple and it is a lot better made.

  • Why does the new Quicktime NOT play my old MOV files?

    Hi Folks.
    I'm using the lasted updated Yosemite on a 3-year old iMac.
    Back in my early iMac days (3 years ago), I imported my camcorder's AVCHD files
    into iMove or Final Cut Express and converted them to Quicktime MOV files.
    Turns out they were rendered by Apple or Final Cut into MOV files using the
    Apple Intermediate codec.  I had no choice over this.
    Until I upgraded to Yosemite, I was able to preview any of these movies
    very easily in the Finder.  Simply highlight the movie, press the spacebar,
    and it opens, in a real-time, real-size screen, with a simple play-pause button
    in the progress bar at the bottom.  Never had a problem with any previous
    Mac OS.
    Now when I click on the file in the finder, instead of a movie preview, I get a
    big, silent QT "Mov" icon that just sits there looking silly.
    I double click it to open it up in Quicktime, and it attempts to go through this
    lengthy conversion process, taking at least as long as the movie is in minutes,
    then asking me if I want to save this new "converted" version.
    Fortunately, I have an old version of Quicktime 7 on my Mac, and QT 7 opens it
    and plays it no problem.  No "conversion" necessary.  No cumbersome and
    space-hogging needs to create a "cloned" copy, just so the new, lame version
    of Quicktime can play it.
    What's up, Apple?  AIC was YOUR codec that YOUR SOFTWARE chose to
    transcode into.  Now, your new Quicktime does NOT support this codec?
    And your old version does?  And why might THAT be?
    Really, this is so elementary.  This is not rocket science.  Just like JPG images
    not displaying properly in Mac Mail now.  It begs the question "why" ...?
    I mean, for the elementary preview abilities that always made Mac such a
    friendly computer ... *uh* ... where is that?
    And here we go, wasting hours of time, looking for fixes that should not
    have to be "fixed"...
    Did I miss something?  Or did you?

    Aeclay: here's a couple of ideas.  And an answer to your earlier post.
    Basically two options to work with here:
    Store the files as native AVCHD files... OR
    Convert the files to Quicktime
    I keep two archives of my AVCHD recordings, partly for backup, and partly for Sony's ability to archive nicely in it's own native format on it's PC-friendly utility called "PMB".  (came wtih both my NEX and ALPHA cameras).   I have an old PC that I use for my complete archive; Sony's PMB utility works only on PC's and will do a good job both of archiving, providing a thumbnail database, and re-writing your choice to removable media in it's typical Sony hierarchy.
    If you've only got Mac's, you can still archive your AVCHD recordings; copy them to folders named or organized to your own spec's.   AVCHD is a high-quality compression format, and they'll take up way less disk space than converted Quicktime MOV files.   You can open and play all AVCHD movies quite easily with VLC player.
    The only extra trick to be aware of here is this.  The only reason you would need to preserve the intact "sony" folders (named "AVCHD" / "BMDV" etc) is is you were using Adobe Premiere as a video editor.  Somehow, it needs the hierarchical folder stuff in place to properly index the files.  Not mandatory, but helpful if  you are a Premiere user.  Otherwise, forget the weird "package" folders; just right-click (ctrl-click) on them, choose "view package contents" and MOVE the MTS files out of the Sony hierarchy for permanent storage.  Use VLC player to open and view them.
    From that point on,  you have control over how you manage the files and what intermediate or end-user format you convert them to for your own use.
    I'm not clear on your other question about the files that add the word "converted" on.  Of course Mac will convert to Quicktime MOV files.  Not sure what codec they're using now, likely H.264.  Anyway, don't bother converting.  It'll take up a lot of time and waste a lot of disk space.
    ps. I just found this free utility on the internet.  It's called "MTS CONVERTER". I have not tried it, but it claims to be able to convert all AVCHD files to various useable formats.
    Good luck!  (and happy Valentine's Day!)

Maybe you are looking for