Why doesn't LightScribe work with my Snow Leopard?

Why doesn't LightScribe work with my Snow Leopard? It downloaded and is in my printer folder, but won't open.

Are you really still running 10.6.3? If you are you should run the combo update as many issues were resolved within the updates themselves.
Mac OS X 10.6.8 Update Combo v1.1

Similar Messages

  • Why doesn't Nike+ work with the 1st Gen Ipod touch with 2.1 software?

    Why doesn't Nike+ work with the 1st Gen Ipod Touch with 2.1 software?

    The second gen iPod Touch has firmware version 2.1.1(5F138) whereas the 1st Gen only allows 2.1 (5F137). Don't know if that has anything to do with it, but it's likely.
    Why doesn't Apple allow those with the Nike+iPod sports kit to use their external sensor on the 1st Gen iPod Touch?!?! I can't see why the sensor would be incompatible with the right firmware upgrade!!

  • Linksys WRT54G router--Why doesn't it work with my Macbook?

    I have a perfectly functional Apple MacBook (Unibody, late 2008) running Leopard 10.5.6. I have used it to connect to public Wi-Fi but it is unable to connect to my home Linksys WRT54G router. I called Apple Tech Support, and they suggested that I change the wireless channel and/or temporarily remove the WPA encryption. I did both, the computer still could not connect. In System Preferences on the MacBook, it tells me that "AirPort does not have an IP address and cannot connect to the internet." The tech support guy tried to help, but in the end basically told me that the router just plain might not be compatible with Apple products. (My iPod Touch cannot connect either.)
    I can buy a new router, but this one works perfectly for the rest of the computers in the house (PCs) and they're expensive--and there's no guarantee that those will work either.
    So: Does anyone know any solutions short of buying a new router that would make my Linksys compatible with my Macbook AND our home PCs? Or, failing that, a good, WPA-encrypted router that WILL work with both?
    I have a Snow Leopard disk (I just received the computer on Thursday). Would upgrading to Snow Leopard be of any help? I'm planning on doing it anyway one of these days.
    Many thanks in advance,
    Sola Gratia

    You are in the wrong forum but I'll try and help anyway. That model of Linksys router has a long history of not getting along with Apple products. That is not to say it will never work, but it does require that you download and install the latest firmware for the exact model of router that you have. There are multiple sub-models of that router so make sure that you get the right one.
    Once you have done the firmware update, restart your router and try it again. WPA-psk should work but for troubleshooting purposes, turn off encryption and see if you can get your MacBook and touch working. You might want to use WPA2-psk instead of WPA.
    I would hold off on Snow Leopard until you get WiFi working. Nothing like changing to too many things at one time to really mess things up.

  • Why doesn't Timecapsule work with Windows 7?

    I've been trying for a week and it just doesn't work. All I have is an expensive network switch not a network drive as it constantly crashes under Windows 7 and has to be unplugged and reinstalled only to crash again. I have a BT Homehub 3 and the Timecapsule does not work with it.

    jakeloveslucy wrote:
    Though bridging the Time Capsule might prevent some issues, it also takes away some functionality. Also, Apple will not support troubleshooting that setup. It would be recommended to disable the wireless mode on the BT Homehub device. Time Capsule prefers to be the main router, it works best that way.
    BT hub provides voip / phone services.. you will not be able to use any of them if you bridge it. And disabling wireless still doesn't take away double NAT if you keep the TC as router.
    In fact it is harder than that. Because most ISP in the UK use pppoa authentication you cannot bridge the modem. So I am afraid you are stuck with bridging the TC or double NAT.. turning off wireless or not in the TC is no great issue.. they can work together.. simply by manually locking channels instead of auto selection.

  • Why doesn't Norton work with new windows 10 Microsoft Edge

    Norton is telling me I have to use Internet Explorer to work with Window 10.  It is not compatible to Microsoft Edge which is the browser on Windows 10

    Our apologies for the inconvenience, our toolbar can work only after Microsoft allows browser extensions for edge. Please read the information provided in our Knowledgebase article:
    https://support.norton.com/sp/en/us/home/current/solutions/v113038371_EndUserProfile_en_us
    Harry
    Norton Support

  • Iphoto8 can work with osx snow leopard

    i have a old macbook air with i photo 8, i have installed osx snow leopard last week and after this i can not see my video from my iphone in the iphoto, why?
    when i drag it to desk top can play.

    Welcome to the Apple Discussions. When you installed Snow Leopard did you also select the option to install Quicktime Player 7. If you don't have Quicktime Player 7 installed use the SL install disk to do a custom install and install just Quicktime Player 7. Then see if you can play the videos from iPhoto.
    Actually, with iPhoto 8, the videos will open outside of iPhoto when double clicked on from inside of iPhoto.
    OT
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    NOTE: this is not the same as routinely backing up your entire iPhoto library folder to protect your photos. It only protects the loss of your organizational efforts that the database file contains.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • I took Lion off my Macbook Pro and put Snow Leopard back on and now I can't access Mail or iPhoto. How do I get Mail and iPhoto to work with the Snow Leopard I just put back on?

    Hi. I was having slowness problems with my Macbook Pro and thought I would re-install Lion but put Snow Leopard back on by mistake. I bought the computer used with Lion on it and don't have access to the USB drive or a username/password to reinstall Lion. Now I can't access Mail or iPhoto since I put Snow Leopard on.
    Is there a way to get my Mail and iPhoto working again with Snow Leopard or do I have to "re-upgrade" to Lion?
    Thanks!
    Steve

    You can't. When you converted those libraries to Lion's format, you lost the ability to go backwards. Unless you saved a bootable backup./clone or Time Machine backup of your previous SL installation, you're up the proverbial creek w/o a paddle.

  • Why doesn't my Macbook recognize/accept Snow Leopard 10.6.3?

    I am trying to load Snow Leopard 10.6.3 on my Macbook but it is not compatible.  Why?  When I purchased it there was
    no mention of system compatiblity issues that I recall, other than what was reasonably obvious.  I thought I did my homework.
    Am I hopefully just missing something?  Thank you in advance if anyone might know!

    No. it is my sister in law's Macbook. I installed OSX 10.6.3, then updated software but when completed it shut down and I have not been able to restart. i have reset the pram but that's about it. I will get the install disc and try that next. Thanks. BTW .. when I try to restart it goes thru the motions, gets to a blue screen but before the desk top sets up ... it goes to black with the curser in the upper left corner ... and frozen.
    Thanks again for your reply.

  • Why doesn't mail work with Att Yahoo servers?

    Ever since Bellsouth went to using Yahoo to handle their email it hasn't worked regularly. Now that my system is so old they are incapable of helping. They do not have any tech support for Apple products nor do they seem to care. The conversation all ways ends up that they say something is wrong with the mail program or the computer. Since i had it checked out I know that is BS.
    I know there are a number of people using older Mac Mail programs with one of the At&T companies that someone must have found a solution, or not? There are pages of Mac owners complaining on the ATT site but no solutions.
    Looking for someone that has succeeded in dealing with ATT and what is it?
    It may be that the solution is using a different email program than Mac Mail or forwarding from a different email supplier. Any suggestions?

         Thanks to all whom replyed to my query. I have spent more time with ATT and I hired a local computer guy to help. Using you alls info and my high priced friend the email works most of the day. I have found a couple things... some say the servers are IMAP and some say they are POP. What I have had to do is have both set ups available to me to use to get and send mail. Right now the POP is working best.
         ATT will tell you either, depending on the fool you talk to. The last guy said only POP will work. The guy befoe said they were IMAP. They also like to send people to their 3rd party tech people. Unfortunately they don't know anything about macs and they won't tell you that until after you pay them. What the final say from ATT is that they only guarantee that you can get you mail via web-mail and will do little to nothing to help you othet than what is correographed on their computer screen. If that doesn't help thay basicly say tuff luck. My suggestion to all is find someone else other than ATT OR IT'S SUBS.
         Currently 2 of my three bellsouth.net emails address work a couple days at a time. One only works for 15 minutes. To get it to work you can open the Connection Doctor and run it usually once and the email will begin working again. You can access it (OS 10.8.4) by clicking on the little "triangle with exclaimation point" that comes up next to you email box name. I leave open all day to make it easier to access. It also makes the G5 work at the same time. Nor because they are connected but because the problem is with Yahoo-ATT.
         Current POP settings are:
                                        inbound.att.net     port 110 with SSL and password authentication
                                        outbound.att.net   port 465 with SSL and password authentication on two of the emails
         On one of the emails I have a GoDaddy web account that uses:
                                           pop.secureserver.net  default port selection with SSL and password authentication
    for the out going mail server which works for the bellsouth email. Seems like it shouldn't but it does.
    I also keep the IMAP settings as noted by "goodmanrc" as sometimes it works.
                       Incoming Mail Server
                          Host Name       pop.att.yahoo.com
                          Use SSL          ON
                          Authentication  Password
                          Port                995
                       Outgoing Mail Server
                          Host Name      smtp.att.yahoo.com
                          Use SSL         OFF
                          Authentication  Password
                          Port               25
    The settings as noted by Andrew99 use to work before I got Uverse. Now they no longer work. At least not this week.
    Thanks again to all.

  • Why doesn't itunes work with lion 10.7

    iTunes doesnt work after the instalation of Lion 10.7.2

    I've the same problem... you manage to get it solve?
    Process:    
    iTunes [1316]
    Path:       
    /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier: 
    com.apple.iTunes
    Version:    
    10.5.3 (10.5.3)
    Build Info: 
    iTunes-10530301~1
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [198]
    Date/Time:  
    2012-02-19 02:26:22.477 +0800
    OS Version: 
    Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:     
    27026 sec
    Crashes Since Last Report:      
    5
    Per-App Crashes Since Last Report:   5
    Anonymous UUID:                 
    69DFAEFC-EAB5-42B1-8456-540B7EA44299
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
    0x10b3b7000 -   
    0x10c441fef  com.apple.iTunes (10.5.3 - 10.5.3) <F2A947DF-4408-401C-43EF-340F966C91CC> /Applications/iTunes.app/Contents/MacOS/iTunes
    0x7fff6afb7000 -
    0x7fff6afec1ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.27f3
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x393930353239352D3035322E4130304C4600
    Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x393930353239352D3035322E4130304C4600
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.5)
    Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHY2200BH, 200.05 GB
    Parallel ATA Device: HL-DT-ST DVDRW  GSA-S10N
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5

  • I love Safari...But why doesn't it work with MySpace???

    For some reason MySpace is the only site I always have problems viewing images. On my home screen, 90% of my friends pictures all come as the blue box with the question mark. When I look at someone's page, almost all user pictures are blue boxes with question marks. Whenever I browse for users...again, almost every single picture comes up as a blue box with a question mark!
    Seriously, what gives? Every other site works perfectly and this problem with Safari and MySpace is the one thorn in otherwise superb browser.
    I've tried, emptying the cache, deleting cookies, clearing history...I've even Reset Safari multiple times...Still, even with the new update...Safari and MySpace images do not work!
    Can someone please help me shed some light on the situation...Cause it seems not many other people are having this problem. Thanks in advance.

    It probably says more about MySpace than Safari but anyway you could try the latest nightly build of Safari's Webkit web browser engine. I always use this now and find it offers greater all round performance.
    Try it and see if it helps.
    Just click the big 'Download Nightly builds' button on this page.
    http://webkit.org/
    In case you don't know, you just run the webkit application instead of Safari but in use it will seem no different than Safari because all you're doing is running an updated version of the rendering engine in Safari. Safari 3.1 remains untouched and you can switch back to that if you wish.

  • Why doesn't Firefox work with Yahoo pages?

    I have Firefox 23 and just reinstalled adobe flash but most of the pages/videos that I try to open from Yahoo (i.e. news articles) won't display. Either it's a blank page or the video won't load on the page. Every other browser (Safari, Chrome) that I've tried works just fine. It would be nice if Firefox stepped up and decided to work.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • HT1349 I keep getting a compatability message trying to run my iTunes on Windows 7.  I have reinstalled iTunes and ran diagnostics and keep getting the message.  I also have been intouch with Apple Support.  Why doesn't it work with Windows 7?

    I keep getting a compatability message trying to run iTunes on Windows 7.
    I have tried contacting Apple Support and sent a print screen picture.

    Refer to this article:
    iTunes for Windows: How to turn off Compatibility Mode
    http://support.apple.com/kb/TS1489
    Uncheck all boxes in Compatability tab.

  • HP 1006 printer not working with new Snow Leopard drivers

    My MacBook Pro is connected to my HP 1006 LaserJet via TimeCapsule. After trashing the HP folder in Library>Printers, I downloaded the latest drivers, and restarted the MacBook. I opened a document to print, and selected the HP printer from the Printer drop down. The Printer opens in the dock, and when I click on it, the Status of the job is printing, but it hangs on a message that reads, "Printer busy; will retry in 10 seconds…" then nothing happens.
    Any thoughts?

    Same issues here...same setup. This has been an intermittent issue for some time now. My latest incident was when power was lost during one of the big snow storms. Print jobs hang when going trough Time Capsule (wired or wireless) but are fine if plugged into computers USB port. I have resolved this issue before by following similar steps outlined above, but the solution seem to be hit or miss.

  • Iphone 3g - why doesn't it work?

    I purchased a new pair of Nike running shoes excited to link up the sensor and get started using with my iphone 3G. However, I find out the Nike Plus only works with an iphone 3GS. I'm now going to have to return the Nike Sensor for a refund instead of having to upgrade to another Iphone model. Is there anyway around this? Why doesn't it work with the Iphone 3G? What makes the operating system in the 3GS different so it works?

    As evidence too there is a hack which gets it working as well:
    http://mymojo.ca/index.php/2009/12/31/weekend-project-nike-and-iphone-3g-part-1/

Maybe you are looking for

  • For a SharePoint list LVWP - how to open links in new window? (Without SPD - Without access to server)

    Hi there, I canNOT use SharePoint Designer nor do I have access to server to change any 14 hive files. I have a SharePoint 2010 List with a field of type Hyperlink. I need these links to open in New Window. Only links with-in this LVWP should open in

  • How to make extensionless files open as PHP in Dreamweaver

    I currently have some files that do not have any file extension. For example, my file would be "test" instead of "test.php". Is there a way to tell dreamweaver to open an extensionless file, by default, as a php file? Right now it just opens it up as

  • Automator to open a folder of files

    I'm trying to set up a kiosk to display students' work. I have movies and presentations. The movies and presentations are set to play on opening. I would like to put these in a folder and have automator open each file and play it, then loop through t

  • ITunes Plus in Malaysia

    Hi, I can't seem to find iTunes Plus under the quick links section. Does Malaysia not have iTunes Plus, as I will need to burn couple of songs into CDs for a media event? Kindly advise. Thanks!

  • Find Documents in KM

    Dear Readers, Can someone let me know what classes I need to use to find documents in KM for a given property/value and vice-versa. Portal Version EP6 SP2 Thanks and regards, Mandar