Why doesn't my php service work on the mobile device but in the emulator?
I currently have a browser version of my Flex app that uses a series of php services to provide database functionality. It works well- now I am looking to add a mobile version. I have segmented all my code such that I have a core of code that both the desktop and the mobile can use with the specifics placed on top. I have been testing my mobile version in the emulator and the php services work fine. But when I use the mobile application on the device it has no connectivity.
I have checked and:
<uses-permission android:name="android.permission.INTERNET"></uses-permission>
is in my manifest and in the application the permission says full network access.
I am attempting to run it on a Droid Bionic running ICS.
Also the webservice endpoint is secured. I have manually set it in the project in several locations (I don't think I missed any...)
Any suggestions would be appreciated.
Thanks,
-Jonathan
If serials don't work, you may simply have the wrong installer like one that is for an upgrade or different region of the world and using site license serials may not help the matter. Assuming your really mean Premiere 6, not CS6, that is. Anyway, beyond that generic advise nobody will be able to help you much. It's simply old software and even I can barely remeber those versions anymore much less any specifics regarding install and licensing back then.
Mylenium
Similar Messages
-
Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!
Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store -
Why doesn't my E4200 wireless router show all attached devices when viewing the DHCP Client table?
I recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results.
Other than a factory reset, any suggestions to get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago? Thanks!barrysegal wrote:
I recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results.
Other than a factory reset, any suggestions to get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago? Thanks!
It is strongly recommended that you upgrade the firmware to a smart wifi, which may resolve lot of bugs. You can also download the firmware here:
E4200v2 Linksys Smart Wi-Fi Firmware11/19/2012
Ver.2.1.39.145204
Download
18.3 MB -
Lost my iPhone and why doesn't find my iPhone work
Lost my iPhone and why doesn't find my iPhone work
A friendly reminder: In order to use Find My IPhone Successfully, you need to 1. Turn on Location Services, 2. Lock Location Services (Using Restrictions in Settings, General, Restrictions) so that if some one else finds your IPhone, they can NOT turn off Find My IPhone And/Or Location Services itself! 3. Add your Mobile Me and/Or ICloud Account to your IPhone. 4. Lock Accounts (Again in Restrictions) from being changed or Deleted so that your Mobile Me And/OR ICloud Account can NOT be Deleted! 5. Look Up the Location of your IPhone Before Suspending Service to the IPhone, NOT after Suspending Service (simple common since applies here as well).
-
Why doesn,t my mail iccon work?
Why doesn't my mail icon work?
If you moved Mail out of the Applications folder, then applied the security update, Mail has been disabled.
It must stay protected in the Applications folder, or you risk the possibility that malware might change it and use it to send spam.
Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004 -
Why doesn't my VGA adapter work to connect my iPad2 to my projector. I haven't had any problems in the past?
Hey MarieF-D,
Thanks for the question. The following article provides basic troubleshooting steps that may help to resolve your issue:
iOS: About Apple Digital AV Adapters
http://support.apple.com/kb/HT4108
Troubleshooting
If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
Disconnect and reconnect the adapter from the iOS device and display.
Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
Remove any VGA or HDMI extension cables or converters.
Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
Note: When using an Apple Digital AV Adapter manufactured before early 2012 with iPad (3rd generation), you may see the "This accessory is not supported" alert. Dismissing the alert will allow you to use the adapter.
For optimal performance, you may need to adjust the video resolution or settings for your display. If your display offers an "auto detect" or "factory default" setting, you may be able to use these options to optimize video resolution and display.
Thanks,
Matt M. -
Why doesn't my duplicate frame work in photoshop 2014?
why doesn't my duplicate frame work in photoshop 2014?
I draw a figure in frame 0 then duplicate frame. After the frame is duplicated I move the figure over to make sure there are different frames but as soon as I check the first frame Ive noticed that both frames have moved together. So nothing has changed. Why?I always create the individual frames in layer groups first. So build what you need, break them up or duplicate them, position them where you want them and then create your frames by turning off all the layer groups or layers you don't need.
Here is an example of one of my layer pallets:
Each scene is a frame and I turn them on and off as I need them. -
Why doesn't my email address work for apps
Why doesn't my email address work on my envy printer?
You don't give us anything like enough data to go on. What is your operating system? Do you have a functioning iCloud account - i.e. are you signed in in System Preferences>iCloud?
Were you originally a MobileMe subscriber? If so, did you migrate to iCloud?
Was your email still working recently? Do you get any error messages? What happens when you try to use it?
Have you been using an @icloud.com address or an @me.com address?
(Please do not post your email address when answering.) -
Why doesn't my iWeb page work with google chrome?
Why doesn't my iWeb page work with google chrome?
Bonjour
Don't test your website with Google Chrome if you publish it into a local folder.
Publish to a server. You need an URL with http:// and ( not file://) to view an iWeb site in Chrome.
You can also
activate the web sharing on your computer (Preferences system > Sharing > Check web sharing)
publish to Sites folder (MacIntosh HD > Users > Home folder >Sites)
and use the URL (with http) given by the web sharing tab in preferences system http://computer_name.home/~user_name/site_name/ -
Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?
Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection. -
How can I administer a Gen1 Airport Express from, my MacPro (OS 10.9, Airport Utility 6.3.2). I can see the Express in the WiFi window but from the Airport Utility I get the following message: " This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Of course there's nothing of value on the support page. Any clues anyone?
Apple has dropped support in Mavericks (10.9) of the AirPort Express and AirPort Extreme models that were discontinued more than six years ago.
You can still administer the older AirPort models if you have a Mac running Leopard, Snow Leopard, or a PC. -
At my home, Location Services work great on my iPhone but not at all on my iPad.
At my home, Location Services work great on my iPhone but not at all on my iPad.
Check to make sure they are turned on.. Settings > Location services > ON. You can also check to make sure certain apps you want to with location services are turned on as well!
-
I got the message "the ipod cannot be used because the mobile device service is not started"...when i plugged my ipod in with itunes running
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
It switches to the Classic view but not the new view which I really like.... My laptop has Google Chrome and it has not problems with this new view of Windstream only with Mozilla Firefox 5, the other version never had any problems either...I had 3 and had no problems till I up graded....
The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is. -
Why do some images not show on the mobile browser but do on the normal Firefox
I have an HTC desire hd. I have had a site built.
the images don't show on the mobile browser. when using the standard browser which came with the phone 'internet' it works fine. is there a reason for this?I get a content encoding error when trying to load one of the problem images.
http://www.signapedia.com/gethumb.php?path=userfiles/31_prodimg_55856_img04.jpg&size=85
Why this happens will take some additional research.
Maybe you are looking for
-
Trying to uninstall an older version of iTune on a PC running XP pro. It goes to end of install and has a conflict. Uninstalls the new version, but will not reload the older version. No iTunes will boot up.
-
How to open and edit CRP files?
Hi, at my workplace I see the following folders: C:\Program Files\Novell\ZENworks\Asset Management\bin\UsageLogs In this folder I see secret files like: 20090115.CRP and 20090115-web.CRP Each days ZenWorks create this 2 files. How can I open and edit
-
Welcome to the Service Providers General discussion
Welcome to the Cisco Networking Professionals Connection Service Providers Forum. This topic will provide you the opportunity to discuss issues surrounding General Service Provider solutions. We encourage everyone to share their knowledge and start c
-
How do I stop B/W photos changing to colour?
I am running LR 2.7 on a Mac and this weekend for the first time, I set my camera to black & white mode and took a series of raw photos. When I imported them they all came across in the filmstrip as black & white but as soon as I started viewing them
-
Can anybody confirm to me that the itrip works ok with the 1st generation ipod? I am thinking of buying one ... any other issues that people have had with the itrip would be worth knowing about.