Why doesn't Timecapsule work with Windows 7?

I've been trying for a week and it just doesn't work. All I have is an expensive network switch not a network drive as it constantly crashes under Windows 7 and has to be unplugged and reinstalled only to crash again. I have a BT Homehub 3 and the Timecapsule does not work with it.

jakeloveslucy wrote:
Though bridging the Time Capsule might prevent some issues, it also takes away some functionality. Also, Apple will not support troubleshooting that setup. It would be recommended to disable the wireless mode on the BT Homehub device. Time Capsule prefers to be the main router, it works best that way.
BT hub provides voip / phone services.. you will not be able to use any of them if you bridge it. And disabling wireless still doesn't take away double NAT if you keep the TC as router.
In fact it is harder than that. Because most ISP in the UK use pppoa authentication you cannot bridge the modem. So I am afraid you are stuck with bridging the TC or double NAT.. turning off wireless or not in the TC is no great issue.. they can work together.. simply by manually locking channels instead of auto selection.

Similar Messages

  • HT1349 I keep getting a compatability message trying to run my iTunes on Windows 7.  I have reinstalled iTunes and ran diagnostics and keep getting the message.  I also have been intouch with Apple Support.  Why doesn't it work with Windows 7?

    I keep getting a compatability message trying to run iTunes on Windows 7.
    I have tried contacting Apple Support and sent a print screen picture.

    Refer to this article:
    iTunes for Windows: How to turn off Compatibility Mode
    http://support.apple.com/kb/TS1489
    Uncheck all boxes in Compatability tab.

  • Why won't icloud work with windows vista anymore?

    why won't icloud work with windows vista anymore?

    I had to re-install after the newly released iTunes - for Vista it does work with iClud 2 - not 3. You can download from this site.

  • Why doesn't LightScribe work with my Snow Leopard?

    Why doesn't LightScribe work with my Snow Leopard? It downloaded and is in my printer folder, but won't open.

    Are you really still running 10.6.3? If you are you should run the combo update as many issues were resolved within the updates themselves.
    Mac OS X 10.6.8 Update Combo v1.1

  • Why doesn't Nike+ work with the 1st Gen Ipod touch with 2.1 software?

    Why doesn't Nike+ work with the 1st Gen Ipod Touch with 2.1 software?

    The second gen iPod Touch has firmware version 2.1.1(5F138) whereas the 1st Gen only allows 2.1 (5F137). Don't know if that has anything to do with it, but it's likely.
    Why doesn't Apple allow those with the Nike+iPod sports kit to use their external sensor on the 1st Gen iPod Touch?!?! I can't see why the sensor would be incompatible with the right firmware upgrade!!

  • Why doesn't Norton work with new windows 10 Microsoft Edge

    Norton is telling me I have to use Internet Explorer to work with Window 10.  It is not compatible to Microsoft Edge which is the browser on Windows 10

    Our apologies for the inconvenience, our toolbar can work only after Microsoft allows browser extensions for edge. Please read the information provided in our Knowledgebase article:
    https://support.norton.com/sp/en/us/home/current/solutions/v113038371_EndUserProfile_en_us
    Harry
    Norton Support

  • Why won't itunes work with windows 8.1?  i tunes can not locate my music.

    Why won't windows 8.1 let itunes locate my music?  I deleted and downloaded, still won't do it.  But like majic after I installed windows 8.1 my computer had a XBOX music player appear, that found my 3200 songs and it was able to play the entire library no problem.  Any ideas on how i get itunes to start working with windows 8.1?

    Hi zachwill10,
    Welcome to the Support Communities!
    To resolve this issue you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    I hope this information helps ....
    - Judy

  • Why can´t I work with windows 7 in a local network

    I just installed the new OS, but I use my Imac to work in a Windows Network with all my team, some how, since I installed the new system I can´t log in and work with my local network, does anyone knows why this happens?

    Hi,
    SQL Server Management Studio does not support SSCE 4.0. You can use SSCE 4.0 Design Tools(SSCEVSTools) which installs the SQL Server Compact
    4.0 design-time components with Visual Studio.
    Does Sql Management Studio work with SSCE 4.0?
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7588375e-3069-4d68-9365-29feb25b7296/does-sql-management-studio-work-with-ssce-40?forum=sqltools
    VS 2010 SP1 and SQL CE
    http://weblogs.asp.net/scottgu/archive/2011/01/11/vs-2010-sp1-and-sql-ce.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Why does Thunderbird not work with Windows 8.1

    I have used thunderbird now for about 6 years, for all my website accounts. During that time I have had very few problems, about 9 months ago I started using Windows 8, I transferred all my accounts from my old machines running on XP pro to new machines running Win 8 and thunderbird ran ok. I have auto updates running so I am assuming both thunderbird and windows are updating whenever! About 4 weeks ago I started experiencing major problems with Thunderbird, it would start then freeze, then it would start again then freeze, if I ran it in safe mode it would work for a while. Now it opens and freezes, the message at the top just says ' Thunderbird is not responding'. Even in safe mode now it will not work! I have tried uninstalling and re-installing, I have even tried installing an earlier version of Thunderbird, I Have deleted the profile and forced it to produce a new one, I have spent hours trawling different sites trying to find an answer, and you know what, the only conclusion I could come to was, nobody seems to care whether this problem is solved or not, so reluctantly I have had to give up and I moved all my accounts to Outlook, which works perfectly with Windows 8.1. I think that should have been the answer, right from the start of the problem!

    The point is, it shouldn't matter if you're using McAffee or Norton or not using any anti-virus at all. Thunderbird works on XP. Thunderbird works on Vista. Thunderbird works on 7. But despite what the FAQ says, Thunderbird does _NOT_ work on Windows 8. This is a problem that many people are having and Mozilla _OUGHT_ to be able to fix it.
    I hate to bitch because Thunderbird is free and it's a damned good program. But this damned good program that worked through three earlier iterations of MicroSoft operating systems is unusable on 8.1. Anybody who has any knowledge of user experience can tell you that a program becoming unresponsive at random for anywhere from 1 to 3 minutes is simply not acceptable.
    This problem has been known for quite some time now. Is anybody in Mozilla support even looking at it?

  • Linksys WRT54G router--Why doesn't it work with my Macbook?

    I have a perfectly functional Apple MacBook (Unibody, late 2008) running Leopard 10.5.6. I have used it to connect to public Wi-Fi but it is unable to connect to my home Linksys WRT54G router. I called Apple Tech Support, and they suggested that I change the wireless channel and/or temporarily remove the WPA encryption. I did both, the computer still could not connect. In System Preferences on the MacBook, it tells me that "AirPort does not have an IP address and cannot connect to the internet." The tech support guy tried to help, but in the end basically told me that the router just plain might not be compatible with Apple products. (My iPod Touch cannot connect either.)
    I can buy a new router, but this one works perfectly for the rest of the computers in the house (PCs) and they're expensive--and there's no guarantee that those will work either.
    So: Does anyone know any solutions short of buying a new router that would make my Linksys compatible with my Macbook AND our home PCs? Or, failing that, a good, WPA-encrypted router that WILL work with both?
    I have a Snow Leopard disk (I just received the computer on Thursday). Would upgrading to Snow Leopard be of any help? I'm planning on doing it anyway one of these days.
    Many thanks in advance,
    Sola Gratia

    You are in the wrong forum but I'll try and help anyway. That model of Linksys router has a long history of not getting along with Apple products. That is not to say it will never work, but it does require that you download and install the latest firmware for the exact model of router that you have. There are multiple sub-models of that router so make sure that you get the right one.
    Once you have done the firmware update, restart your router and try it again. WPA-psk should work but for troubleshooting purposes, turn off encryption and see if you can get your MacBook and touch working. You might want to use WPA2-psk instead of WPA.
    I would hold off on Snow Leopard until you get WiFi working. Nothing like changing to too many things at one time to really mess things up.

  • Why does coverflow not work with windows 7

    I installed windows 7 on my computer and now my iTunes does not show coverflow. I get a black screen that says "iTunes is unable to browse album covers on this computer."
    I thought a patch would be issued to resolve this, but it's been quite a while and no changes. I use the most up-to-date copy of iTunes.
    Does anyone have a solution?

    The point is, it shouldn't matter if you're using McAffee or Norton or not using any anti-virus at all. Thunderbird works on XP. Thunderbird works on Vista. Thunderbird works on 7. But despite what the FAQ says, Thunderbird does _NOT_ work on Windows 8. This is a problem that many people are having and Mozilla _OUGHT_ to be able to fix it.
    I hate to bitch because Thunderbird is free and it's a damned good program. But this damned good program that worked through three earlier iterations of MicroSoft operating systems is unusable on 8.1. Anybody who has any knowledge of user experience can tell you that a program becoming unresponsive at random for anywhere from 1 to 3 minutes is simply not acceptable.
    This problem has been known for quite some time now. Is anybody in Mozilla support even looking at it?

  • Why Can't Camera Work with Windows Messenger for Mac and give output video?

    I can see from the other end, but my camera won't come on so they can't see me. I hear them and can type in Messenger, but I'd like to have 2-way video, not just receive.
    My camera works as I use it in Photo Booth, so that's not the problem. I can't find a way to setup the video within Messenger. Don't know if it's problem with Messenger or Leopard.
    Whatever it is, it's very annoying that I can't output video.
    Anyone with similar problem or have the answer? I'd be forever grateful!
    junroe

    Microsoft Messenger doesn't have video support on the Mac version. If you want crossplatform videochat, ask your friends to join AOL Instant Messenger. You can get video chat crossplatform between AOL Instant Messenger for PC & Apple's iChat which supports AOL Instant Messenger screen names. Skype is crossplatform too. An open source program called ophonex supports Microsoft Messenger's Netmeeting protocol for video chat as well. IRC is also crossplatform in videochat though its setup is a bit more complicated with the software known as Ircle for the Mac.
    Message was edited by: a brody

  • Why doesn't mail work with Att Yahoo servers?

    Ever since Bellsouth went to using Yahoo to handle their email it hasn't worked regularly. Now that my system is so old they are incapable of helping. They do not have any tech support for Apple products nor do they seem to care. The conversation all ways ends up that they say something is wrong with the mail program or the computer. Since i had it checked out I know that is BS.
    I know there are a number of people using older Mac Mail programs with one of the At&T companies that someone must have found a solution, or not? There are pages of Mac owners complaining on the ATT site but no solutions.
    Looking for someone that has succeeded in dealing with ATT and what is it?
    It may be that the solution is using a different email program than Mac Mail or forwarding from a different email supplier. Any suggestions?

         Thanks to all whom replyed to my query. I have spent more time with ATT and I hired a local computer guy to help. Using you alls info and my high priced friend the email works most of the day. I have found a couple things... some say the servers are IMAP and some say they are POP. What I have had to do is have both set ups available to me to use to get and send mail. Right now the POP is working best.
         ATT will tell you either, depending on the fool you talk to. The last guy said only POP will work. The guy befoe said they were IMAP. They also like to send people to their 3rd party tech people. Unfortunately they don't know anything about macs and they won't tell you that until after you pay them. What the final say from ATT is that they only guarantee that you can get you mail via web-mail and will do little to nothing to help you othet than what is correographed on their computer screen. If that doesn't help thay basicly say tuff luck. My suggestion to all is find someone else other than ATT OR IT'S SUBS.
         Currently 2 of my three bellsouth.net emails address work a couple days at a time. One only works for 15 minutes. To get it to work you can open the Connection Doctor and run it usually once and the email will begin working again. You can access it (OS 10.8.4) by clicking on the little "triangle with exclaimation point" that comes up next to you email box name. I leave open all day to make it easier to access. It also makes the G5 work at the same time. Nor because they are connected but because the problem is with Yahoo-ATT.
         Current POP settings are:
                                        inbound.att.net     port 110 with SSL and password authentication
                                        outbound.att.net   port 465 with SSL and password authentication on two of the emails
         On one of the emails I have a GoDaddy web account that uses:
                                           pop.secureserver.net  default port selection with SSL and password authentication
    for the out going mail server which works for the bellsouth email. Seems like it shouldn't but it does.
    I also keep the IMAP settings as noted by "goodmanrc" as sometimes it works.
                       Incoming Mail Server
                          Host Name       pop.att.yahoo.com
                          Use SSL          ON
                          Authentication  Password
                          Port                995
                       Outgoing Mail Server
                          Host Name      smtp.att.yahoo.com
                          Use SSL         OFF
                          Authentication  Password
                          Port               25
    The settings as noted by Andrew99 use to work before I got Uverse. Now they no longer work. At least not this week.
    Thanks again to all.

  • Why doesn't Firefox work with Yahoo pages?

    I have Firefox 23 and just reinstalled adobe flash but most of the pages/videos that I try to open from Yahoo (i.e. news articles) won't display. Either it's a blank page or the video won't load on the page. Every other browser (Safari, Chrome) that I've tried works just fine. It would be nice if Firefox stepped up and decided to work.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Why doesn't itunes work with lion 10.7

    iTunes doesnt work after the instalation of Lion 10.7.2

    I've the same problem... you manage to get it solve?
    Process:    
    iTunes [1316]
    Path:       
    /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier: 
    com.apple.iTunes
    Version:    
    10.5.3 (10.5.3)
    Build Info: 
    iTunes-10530301~1
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [198]
    Date/Time:  
    2012-02-19 02:26:22.477 +0800
    OS Version: 
    Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:     
    27026 sec
    Crashes Since Last Report:      
    5
    Per-App Crashes Since Last Report:   5
    Anonymous UUID:                 
    69DFAEFC-EAB5-42B1-8456-540B7EA44299
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
    0x10b3b7000 -   
    0x10c441fef  com.apple.iTunes (10.5.3 - 10.5.3) <F2A947DF-4408-401C-43EF-340F966C91CC> /Applications/iTunes.app/Contents/MacOS/iTunes
    0x7fff6afb7000 -
    0x7fff6afec1ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.27f3
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x393930353239352D3035322E4130304C4600
    Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x393930353239352D3035322E4130304C4600
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.5)
    Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHY2200BH, 200.05 GB
    Parallel ATA Device: HL-DT-ST DVDRW  GSA-S10N
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5

Maybe you are looking for

  • What's new in the CS5.5 SDK?

    OK, well, not a whole lot. But since I went through and diffed it against CS5, I though I'd share. This is from the Mac perspective. Some documentation reorganization -- getting-started.pdf moved into docs/guides and whats-new.pdf disappeared and we

  • Eulapi error while creating EUL for APPS12

    Dear Guru please help to resolve the following error, we need to create the EUL for disoverer 10.1.2.3 integration with APPS12. here is the error ============================= $ORACLE_HOME/bin/eulapi \ -CREATE_EUL \ -APPS_MODE \ -CONNECT system/passw

  • PO Number not showing in RE Document Type

    Hi, When i run the transaction FBL3N with a G/L Account (205030 - MODVAT CLEARING), it shows the Purchase Document Number in some line items, but not in all. When I check, it shows that in Document Type SA, Purchase Document No. is showing but in RE

  • Change sender email for submitted Form emails

    I built a website for a client using Muse and the Form widget through Business Catalyst. However, now whenever the client gets emails from a submitted form, it says its coming from MY email. How do I change the sender so that they recognize that it's

  • TestStand 4.1 manual

    Hi Ni-Guys, Thank you for releasing TS.4.1 But before downloading and installing. I would read the Teststand Reference Manual (the big pdf one). I am especally interested in the multicore stuff. Please post it as an attachment here or show me a link.