WHY I CAN NOT SEE ANY FACE TIME IN MY IPHONE 4 IT DO NOT HAVE ANY OPTION FOR FACETIME
my iphone do not have any option for face time i see my friend iphone it have face time but my iphone do not have it why it is iphone 4 it must have i am refused that why i buy like this mobile in one name but diffrent option
All iP4's have FaceTime built into the iOS. Follow this... http://support.apple.com/kb/HT4319
Some middle eastern countries disable FaceTime, i.e. UAE
Similar Messages
-
Why do I not have the option for my mini bridge in photoshop?
I have a MAC and photoshop CC 2014 and I do not have any option to open mini bridge or even view in mini bridge anywhere in my settings, options or where it should be at the bottom of my photoshop.
Does anyone know where it is or why I don't have it?
Thanks,
NicoleThank you. I was finally able to take to tech support too and they tell me it has been removed. Thanks again. I will take a look at the link.
-
Why i can't see any image on flickr.
That happens most of the times but not always?
Both, on Safari and Firefox i experience the same problem!
I reseted Safari but seems to be uselessYou can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain. -
the billing address it's correct ! why we can't place any order for this address ? On the screen appear that the address is not correct !
Adobe Reader is free; you don't need to order it.
If you try to order another product or service I suggest to Contact Adobe Customer Care. -
Why i can't speak using Face Time
why i can't speak using Face Time
1 time ago (no so long time ago) i can but from few days ago no.
My Iphone tells Face Time doesn't workFace time tells to me that I can't contact the person I'm calling. It' s sounds strange because few days ago I was able to call the same person. It could be some particular ID settings?
-
HT1390 Why don't I see any option to rent films in iTunes? I only see the option to purchase
Why don't I see any option to rent films in iTunes? I only see the option to purchase
Yeah I agree, especially when some movies cost a whopping $20!! Kinda ridddiculous. Hopefully Apple or the film producers will realize they can still make a profit - if not more - if they just let us rent! Ahh!
Thanks again Jules and Happy New Year to u!!
M -
Why i can not download the appradio for my ipodtouch 2g firware 4.2.1
Why i can not download the appradio for my ipodtouch 2g firware 4.2.1 i need that app for sync to my car audio pioneer
What happens when you try?
Have you tried downloading it to your computer and then syncing it to your iPod? -
I am a student who subscribed to the 9.99 photography package, I didn't realize there was a discount for students. I would like to upgrade to the full package with the student discount. I can not find the option for this. How do I do this?
Hi Djmontanalv,
Please go through the link below.
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Regards,
Anand -
Why did Maverick not enable me to access my Documents in the previous format (Grid) and when using the alternative I could not 'clik' to open them. The same applied when I tried to open documents from within my back up disc (LaCie). I had to reinstall 10.8.5 and back up from my LaCie (thankfully) to gain access to all my critical Documents? To deal with this I spent 3 and hlafg hours on telephone to Apple Support ( very helpful - but unable to resolve issues - then 3 hours in Apple Store (again very helpful but only able to assist by clearinng Maverick from my HD and reinstalling 10.8.5. Fortunately LaCie came to the resuce and I was able to back up Mac HD with all my documents but lost about one week of work....!!
Why did I not have the option when upgrading to Maverick to select the new 'Tag" system which I did not want?10.8.5 is the lates ML edition. I use TM and also carbon copy cloner as my second backup. If I were you and you have a TM backup prior to Mavericks I would try another restore at bootup. You should erase your drive first in that process using disk utitlites and then use TM to put back you apps and files. The other choice is to do an internet recovery and then use TM to restore your apps and files. That should fix the permissions issue. I did the same thing and all was OK including getting my original iPhoto progam (9.4.3), iphoto11 and photos back.
-
I am new to FCP. I have a canon 60d camera and purchased fcpX. I was recommended to download mgep streamline and convert my files to prores422. I do not have an option for prores 422 in my download. How can I fix the problem.Please help. There was another suggestion by vimeo.com to use applexdcam ex 1080p30. I do not have that either in my mpeg download.
For future reference, you will most likely get more knowledgeable answers if you post in the FCP forum where the folks who use the product regularly hang out:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x -
Why I do not have the option to choose Wi-FI
why I do not have the option to choose wi fi it is grayed out on my Ipod
Not a good sign. If the following does not resolve the problem then it is a hardware problem and an appointment at the Genius Bar of an Apple store is required.
iOS: Wi-Fi or Bluetooth settings grayed out or dim -
i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.
Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab
Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!
-
When we go to Settings>General, we do not have an option for Software Update...only About and Usage. How do we update the system on our iPad?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I am trying to move my library and playlists to a new computer by burning to CD's. However, I followed the directions by going to File and then Library - then they said to go to burn CD(s) - I DO NOT have that option for some reason. How do I do this? I have done the library sharing thing but I am getting rid of my primary computer and am afraid I will lose the library.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD
Maybe you are looking for
-
Fonts in PDF created from Pages doesn't present correctly on Windows PCs
The fonts documents that I'm creating in Pages and then converting to PDF, aren't presenting properly to people using Windows PC's. Some of the fonts are "wonky". What I'm doing is creating documents in Pages and then creating PDF's either by Print,
-
Integration with PeopleSoft Applications Using Oracle SOA Suite 11g BPEL
Hi, I'm integrating BPEL with Peoplesoft FSCM 9.0 Application on tools 8.49 using Oracle SOA Suite 11g. The BPEL invokes the web service method generated from Peoplesoft Component Interface in a synchronuos manner. I have deployed the BPEL in Oracle
-
Will iMac Intel based computer see Sony DCR-HC96?
Anyone out there had experience downloading image data from the Sony DCR-HC series camcorder to iMovie? I under that a 4-pin to 6-pin firewire connection via Sony's Handycam station is required. Optimally, iMovie should open automatically. I've read
-
class file for pick.ShapeList not found for(int i = 0; i < gooi.shapeInfo.size(); i++)Hi Above is the error thats popping up when I compile. This happens when I edit other classes and try compiling. For some strange and intriguing reason this
-
How to use mobile broadband using sim slot in my lenovo B570.
Hello...Plz. provide the sufficient information of how to use / activate the mobile broadband using the SIM in the SIM slot. Information provided asap will be appreciated.