Why I can't see the stroke on the Application bar on this view?

Instead I have essentials, covering something behind? I tried restore to default and didn't work. And anyway, I shouldn't need to do that. I'm using a Mac.
Thanks.

What have you got selected?
What tool are you using?
What have you got checked in the control bar’s flyout menu?
Your screen shot doesn’t help much.

Similar Messages

Why I can't see in ICLOUD all the contacts I entered manually in my iphone

I noticed that when I signed into ICLOUD I don't see all the contacts I have entered manually in my Iphone and I don't understand why when my Iphone is backup every day.

There is a difference between a backup to iCloud and having your phone set to sync Contacts (and other things) to iCloud. A backup to iCloud stores data on iCloud that you cannot access for any purpose other than doing a full restore to your device (e.g. in the event of a problem or when switching to a new phone). Contact sync to iCloud on the other hand is controlled by Settings > iCloud > Contacts. If you have that turned on and the contacts from your phone are not syncing to iCloud, the following may help: Get help using iCloud Contacts - Apple Support

Why i can not see the columns of "Tax Category" in transaction code FS00

Dear Experts,
Why i can not see the columns of "Tax Category" and "Posting without tax allowed" in tab of "Control Data" transaction code FS00?
How can i add the columns of "Tax Category" and "Posting without tax allowed"?
Looking forward to your reply.
Best Regards,
Merry

Hi,
Go to transaction OBD4, and check whether the field "Tax category" is suppressed in group "Account control" for your GL account group.
If not, then go to OB26 and check the field status for the same field for create, change activity.
Regards,
Gaurav

Why i can`t see my all my photos the streaming in my new i-phone? i have 815 and i just can see 175

Hello. do you know why i can`t see my all my photos the streaming in my new i-phone? i have 815 and i just can see 175

Photo stream photos are only kept in photo stream for 30 days, although up to 1000 will remain on your device until you delete them. When you connect a new device to your photo stream it will only receive photos added in the last 30 days as the earlier photos are no longer there. Chances are, the missing photos were more than 30 days old.
If the missing photos are on another device, you could create a shared photo stream including the missing photos and invite yourself, as explained here: http://help.apple.com/icloud/#mmc0cd7e99. You would see then be able to access the photos on your new phone. Another option is to import them to your computer (see http://support.apple.com/kb/HT4083), then sync them to your new phone using iTunes.

Why i can not see the Document goods movements from T-CODE CO03 ?

Hello,
why i can not see the Document goods movements list use T-CODE CO03 ? I'm sure i have issueed for this production order. thanks.
xinzhou.

Hi,
Is this a problem with only one order? or with all the Orders of the same "Order Type".
If this is with only one Order, check goods movements actually done or not?
If this problem is with other Orders as well (same Order Type), then with the T.Code; OPL8.
In the 2nd Tab Page (Implemenation) - Whether the Check boxes are filled for Documented Goods Movements??
Regards,
Siva

HT204291 Why I can`t see the apple tv in my iMac ?

Why I can`t see the apple tv in my iMac ?

Are you trying to mirror your Mac to your Apple TV? Airplay Mirroring is supported on only the following Macs:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)

Why I can't see the button fuse, when I drag and drop a folder into same name folder

Why I can't see the button fuse, when I drag and drop a folder into same name folder
I saw the option only one time, and i reseach in the internet and I find fuse option, but now never saw again.
And Yes, I drag folders with the same name.

Ok, Gracias por su pronta respuesta, yo necesito arrastar una carpeta a otra ubicacion con una carpeta del mismo nombre, entiendo que lion te advierte si desea reemplazar el contenido o fusionar (mexclar el contenido)
como lo dice aqui :
http://www.cioal.com/2011/06/29/las-cinco-novedades-mas-importantes-de-mac-os-x- lion/
3. Podrás combinar tus archivos y carpetas. Seguro que alguna vez has perdido algún archivo al combinar carpetas o archivos del mismo nombre pero distinto contenido. Ahora, cuando intentes mover una carpeta a un lugar con otra de idéntico nombre, tu equipo te preguntará si prefieres combinar ambas o cambiar una por otra. Los archivos serán tratados de una manera similar: Cuando coincidan archivos con el mismo nombre, el sistema te preguntará también si quieres mantener ambas copias.
y en muchas otras paginas que tratan el tema.
mi problema es que esa opcion no me aparece. solo la opcion de reemplazar (o no reemplazar o detener)
Lo increible es que alguna vez el mismo dia de hoy si me aperecio la opcion.

Why i can't see any image on flickr. That happens most of the times but not always? Both Safari and Firefox

Why i can't see any image on flickr.
That happens most of the times but not always?
Both, on Safari and Firefox i experience the same problem!
I reseted Safari but seems to be useless

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Why i can`t see the featured page of itunes store?

why i can`t see the featured page of itunes store?

What are you trying to do exactly and how are you trying to do it? You want to view artwork for tracks that on your iPod in iTunes? Why would you want to do that when you can just do that from your main iTunes Music library?
B-rock

HT203167 Hi does anyone know why I can only see some of my films in the purchased section on iTunes ????

Hi does anyone know why I can only see some of my films in the purchased section on iTunes ????

"Do you know if its something they are in negotiation to sort out ????"
No way to knwo unless Apple or the studios announce.

When i rotate i can see the stokes of the copies how do i manage to see the strokes of the copies?

when rotating a shape and copying it to create a geometrical pattern i cant see the strokes of the copies i only see the first shape fully and then copies just kind stacks under it
help me please im new to this and really lost sorry for the newbi questions

starvinmarv,
As I (mis)understand it, you may select everything and set the Fill to None (bottom of the Toolbox).

Can't see paint strokes

Ok, I am really new to Motion,so this may be an obvious question.
I am using the paint feature to animate some lines moving across the scren. I am using the write on behavior with write and erase.
I got three pretty good lines going in one group but when I go to ad the fourth, it show that it is there onthe timeline, and when selected I can see the object box move across the screen where the stroke is supposed to be but I can't see the stroke.
Even whe nI take write erase and change it to just write, I still get the box and no stroke. I checked it against all the setting for my other strokes and nothing seems to be different.
Any ideas? I am sure it probably pretty obvious, and Iam just missing it. It's definitely frustrating me.
Thanks!

Hi Ben,
I too am new to motion and I am also having the same problem. I just went down to the Apple Store and the Motion guy couldn't figure out why it was happening either. So I went on to post here and I'm not alone.
The strokes I have difficulty with are the ones with the .mov attached. My strokes are all in different layers, are directly on top of each other and are duplicates of each other but with different styles, as the top one writes the bottom one erases. I am very careful in making sure when I duplicate a layer and then move it to the top layer, that I wait for the green+ so I'm sure it's a new layer. I did learn that the in-point needs to be at the very beginning to get the .mov files to behave properly. Most of the time when I reapply the stroke style, leaving everything in the layer the same, it does start to work. I just re-apply the stroke leaving the .mov file where it is. Not a good solution. Then I pray it continues to work!
Lori
I hope we get some answers

Can you see a image in the Get Info Window?

After upgrading to Mt LIon and while using CS6, I can't see image previews in the Get Info window. Can't see images in the upper left corner of the get info window, so I can't make a selection and then do a copy- paste like I could do before I upgraded to Mt Lion with CS6. I want to be able to paste a image of the subjects in my folders.. IE folder of Panda Bears would have a image of a Panda showing on that folder. Folder of The Great Wall would have a image of the Great Wall on the Folder of Great Wall pictures. This has always worked for the past many years I have used a Mac and Photoshop. I started with Photoshop 2. All my photo folders are represented by images so I have a good idea of what is contained in each folder. Now after 2 weeks in China, 20 folders are represented by 10-11-12, 10-12-12, 10-13-12, 10-14-12 and so on. Shows me nothing but dates. I have tried saving as Jpeg, Tiff, and PAD, and still can't do a copy-paste in the Get Info window. Apple says it is a Adobe problem, Yesterday Adobe told me it is because I am uusing a Nikon D800 and Adobe does not have a patcdh for the NEW Nikon camera. I then tried using my Nikon D2Xs, Nikon D3X, Nikon 800 and even my wife's D50 and none of these camera allow me to copy paste the thumbnail image to the clipoboard like I have been able to do for YEARS... I can see images in a folder in Bridge, but the images dont show in my desktop folders.IE, a folder on my desktop with 200 pictures only show with words/ numbers/letters NO IMAGES appear in the folders on the desktop. On some folders the folders in a folder don't show up as Folders either.
Can Any one help me. Same thing happens on my MACPRO w 16 GB Ram and on my 17" MacBook Pro.

Allan Sicks wrote:
Thanks for your input. Problem might be with the EASTER BUNNY..... have to have someone to blame.
I can't blame you for saying that.
Adobe is the clear owner of the responsibility to make functional their product that they claim is compatible with your operating system. Adobe is the one who sold you the product.
I just went looking for what Adobe has said about Mountain Lion compatibility, and they both list Mountain Lion as compatible and include such language as that on this page (emphasis mine):
Adobe and Apple have worked closely together to test Adobe® Creative Suite® 5, 5.5 and CS6 editions and individual products for reliability, performance and user experience when installed on Intel® based systems running Mac OS X Mountain Lion (v10.8). Earlier versions of Adobe Photoshop® (CS3 and CS4) software were also tested with Mountain Lion and there are currently no known issues.
I suggest that Adobe needs to get on the ball and get this fixed. The time for user patience is over.
If someone from Adobe is saying "Adobe can't fix it" then that someone is at the wrong authority level and/or is thinking on the wrong level.
This is business and the business is making products that have value and are sold to people who perceive that value. Adobe doesn't get to keep selling products that don't work while standing on principles that "it's someone else's problem". Customers don't care why it doesn't work.
It's obvious to a child that if Photoshop CS5 can write the proper things to the Apple OS so that the thumbnails are visible, that there's something Adobe could do to fix it.
But EVEN IF this were something only Apple could fix, that Apple hasn't fixed it yet says pretty loudly that Adobe isn't making the right overtures to Apple for their mutual benefit. Adobe, are your executives so greedy that they can't grease a few palms of their friends over at Apple to put some priority on this? What's the problem here? Has Adobe actually forgotten how to do business?
-Noel
P.S., You should know that I don't use a Mac and am personally having no issues with seeing proper thumbnails and previews on my Windows 7 and 8 systems, since the software that does that isn't from Adobe.

Why dont i ever see downloaded pdfs in the "documents section" in adobe reader on my ipad?

Why dont i ever see downloaded pdfs in the "documents section" in adobe reader on my ipad? They only stay in the Acrobat.com section and when I try to move them the "documents" partion is not listed as an option. Only the folders i have within acrobat.com are listed

The pdfs have been uploaded to Acrobat .com (from my computer) I open the Adobe reader on my ipad and see them in the acrobat partition of the reader. I tap on them and they open. To test whether they were truly downloaded ,I turn off wifi and they still open. I consider this "downloaded" BUT... they stay in the acrobat.com partition of the reader. Nothing ever goes or lives in the "Documents" partition..nor can I move anything there.....Why not? What is the"documents" partition there for if nothing lives or can be moved there?

When downloading is complete, I can not see, run, nor access the file; it only appears in the "Downloads" window (and not the specified folder) and the only options permitted are to delete it, or to go to the download web site; what's blocking it?

My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and the only "Right Click" options permitted are to "Remove From List", "Select All", & "Copy Download Link" I also can not double click to run it. What's blocking it?
I have a similar problem when accessing .zip files that are attachments to my emails. Here, however, I can place the file in a designated folder, however, the .zip file and it's compressed content files are file-typed as "FireFox Document" and I get permissions errors when running an unzip tool.
Why are my download files being quarantined ??? Is there a security setting option I need to change???
To get around this, I'm using IE to download and install these files, but switching back & forth between FireFox & IE is a real pain.

It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''

Why I can't see the stroke on the Application bar on this view?

Similar Messages

Maybe you are looking for