Why I get an error when running a sequence using the LabVIEW operator interface ?

I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
Thanks

Hello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering

Similar Messages

I am getting JavaScript Errors when I attempt to use the Multiscreen Preview function in DW CS 5.

When I attepmpt to use the Multiscreen Preview button in DW CS 5 I get the following error:
"While executing onShow in MultiscreenPreview.htm, the following JavaScript error(s) occured:
In file "Multiscreen Preview":
onShow is not defined"
This leads to either an unusable multiscreen preview box or another series of similar JavaScript errors.
Is there a solution to this problem and if so what is it?
Thank you for your time.

Follow this KB article:
http://kb2.adobe.com/cps/405/kb405604.html
Start with 12 & 4 and then go through the rest if needed.

Any help on why I get an error when running OA_UPLOAD_AND_LINK in background?

Hi experts,
I am attempting to run the OA_UPLOAD_AND_LINK program in the background to upload employee photos placed into a directory on a shared drive by each HR manager. When I check SM37, I see the job was cancelled and the error "Frontend parameter (parameter error)" Message no. OA501 was the reason.
If I run the program in the foreground using the same variant, I don't have any issues and the photos load just fine. Any suggestions on what parameter it's complaining about?
My goal is to schedule this program to run nightly and process any pictures in the shared drive. I'll have a second job remove the files from the shared drive at a later time.
Regards,
Garrett Meredith

FYI,
After looking at the code:
* reject process if running in background and frontend = 'X'
if sy-batch = 'X' and frontend = 'X'.
message id 'OA' type 'E' number '501' with 'Frontend'. "#EC NOTEXT
leave.
endif.
This is the code inside the program preventing it from running in the background. WHY!?! would they do this?
Regards,
Garrett

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

Error when running a script using upsshell.exe

I have a simple custom script which is
Sub Test1()
Set fso= CreateObject("Scripting.filesystemobject")
Set ts = fso.CreateTextFile("D:\DATA\****\Outbox\Templates\Test.txt")
ts.writeline "hi"
End sub
When I am running it manually in workbench, the script runs fine but when I try to run it using upsshell.exe(command provided below)
D:\Oracle\MIDDLE~1\EPMSYS~1\products\FINANC~2\SHARED~1\upsShell.exe CustomScriptEx=****~admin~****~~****~D:\DATA\test\Outbox\Logs~Test1~1033~0
i get the following error
ERROR:
    Code............ 438
    Description..... [Script failure caused error]: Object doesn't support this property or method
    Procedure....... modupsShell.ExecuteCustomScriptEx
    Component....... upsShell
    Version......... 1112
    Process ID...... 292496
    Thread.......... 290292
IDENTIFICATION:
    User............ admin
    Domain..........
    Computer Name... *******
    App Name........ ****
PROCEDURE STEPS:
    1-Split Arguments
    2-Create Load balancer=*******
    3-Authenticate
    4-Get Next App Server
    5-Open App Server=*******
    6-Execute the script=Test1
    7-Step was not reached, a previous step failed
Any ideas on the error?

Hello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software.

I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software. after about 50% of the way, it just crashes.
Thank you,
JTF

I am having the same problem - the install crashes around 40%.
I am using MAC OS 10.10.2 and purchased Acrobat Pro monthly subscription. The error message is:
'Acrobat installer has encountered an unexpected failure. Please try again. If it continues to fail, contact Adobe support.'
I have tried several times but keep getting the same error message. Any ideas?
Thanks,
Cindy

TS4020 I get "server error" when I try to use icloud on my Windows 7 pc

I get "server error" when I try to use icloud.1 on my Windows 7 pc
How do I resolve this problem?

Hi doggywag,
Yes, you must have an iOS device or a Mac to create an iCloud account.
Cheers,
GB

I am upgrading from Tiger to Snow Leopard. I keep getting an error when I try to load the Mac Os x update combined. It says that it was corrupted during download. Have try loading from Apple website V10.6.7 upgrade combined but it still won't do it?

I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.

Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update.

Getting an error when i try and download the free photoshop trial

getting an error when i try and download the free photoshop trial

I have no problem downloading the trial from http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
If you still have these problems, try downloading from http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
Make sure you follow the Very Important Instructions on that page.

Error when I try to use the XMLElement(), XMLForest(), etc functions?

I'm getting an "invalid column name" error when I try to use the xmlelement() function (and the like). Is this function only available on 9i Release 2? How do I find the SQLX functions and/or load them up for use? Hopefully someone will see this as a quick question and answer it for me!
Cheers,
Fish

Reply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

Everytime I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Every time I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Hello teachermama10, The Factory Data Reset does remove all data including files and photos. I understand that making sure your phone information is backed up is of the upmost importance. You can ensure your phone data is backed up using these links: http://vz.to/1uM5mwZ and http://vz.to/1vEzYok. You can also try our great Verizon Cloud feature as an option for backing up and syncing your phone info! Check it out: http://vz.to/1s4GctA.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

Why am I getting Run-time menu error (Error 88 occurred at One or more illegal menu item index in...) in my built application (single .exe) , but don't get any error when running/debugging it?

I am using LabVIEW 6.02 & also downloaded the application builder patch. For my runtime menus, I've a subVI that first calls "Delete Menu Items.vi" to get rid of the standard menu items and then "Insert Menu Items.vi" to add my own. I only get an error when I try to run the built application.

There was a similar issue in LabVIEW 5.0 where you would get the error if you passed an empty array to the 'items' input of Delete Menu Items. This was corrected in version 5.0.1. Did you mass compile your VI's after upgrading to version 6.0.2?
I tried to reproduce the problem in a small VI but was not successful. I can run an executable built from this example without any problems. I am attaching it for you to test.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect
Attachments:
menu.llb ‏33 KB

Getting an error when running OPENROWSET on remote SSMS

Hi!
I'm getting an error when I execute OPENROWSET command
from a remote SQL Server Management studio. But has no problem when directly execute the command on our database server.
Msg 7303, Level 16, State 1, Line 2
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
Is there anything I need to enable or configure?
Thank you in advance for your help!

OK, this is the information that we need.
"It is already opened exclusively by another user, or you need permission to view its data."
Please check those 2 options:
* "already opened": at time the connection is ot working try to open the file localy with the excal application. If the file is in used then the excel will promp about this. If it is not give you any error localy then
try again from remoe (since the excel might take control if the connection is opened but not in used by remote connection). If you get that this might be the problem pls repeat this several time to make sure.
* "you need permission": This is much more common situation
>> By default, when you use OpenRowSet to remote server it's the SQL Server Service user that needs access to the file. This is why lot of time it work ocaly and not from remote. check the service's user's permission.
You can change the SQL server to run as a AD user (with the security implications it has) and then give that user access to the file on the network
>> You are trying to use a share network folder. check thi link:
http://technet.microsoft.com/en-us/library/ms175915.aspx
"To use BULK INSERT or INSERT...SELECT * FROM OPENROWSET(BULK...) to bulk import data from another computer, the data file must be shared between the two computers. To specify a shared data file, use its universal naming convention (UNC) name, which takes
the general form"
>> check this link as well:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ac615f7e-a4af-44d9-8bba-8e5c20be3c76/using-credentials-with-openrowset?forum=sqlintegrationservices
>> make sure that you use the right provider. Are you using 64 bit or 32?
[Personal Site] [Blog] [Facebook]

Get an error when run eclipse

Hi
after download sdk1.3, sdkee1.3.1, eclipse2.0.2 and when run eclipse i got the following error
JVM terminated. Exit code=2
c:\WINNT\syste,32\javaw.exe
-cp E:\program Files\eclipse\startup.jar org.eclipse.core.launcher.main
-os win32
-ws win32
-arch x86
-showsplash e:\program files\eclipse\eclipse.exe -showsplash 600
pls tell me what is the problem

Hi,
You certainly have an older version of java.exe and javaw.exe in your windows directory.
Replace them with the corresponding programs you will find in the jdk1.xx/bin you are using. (jdk1.4/bin for example).
I have had the same problem running eclipse under windows2000 .So I have replaced the too old java.exe and javaw.exe (which were old verions from year 2001) with the newest version from my last jdk1.4 install and now all is working fine.
hope that's help
Regards
Olivier Constans

Why I get an error when running a sequence using the LabVIEW operator interface ?

Similar Messages

Maybe you are looking for