Why I get CRC error when copying outlook.ost file?

My workstation is using NTFS, Outlook 2007 with Exchange 2007 server.
My outlook.ost file is 1.7GB.
As my Outlook runs into problem, I tried to copy the outlook.ost file to another location for repair, but I keep getting CRC errors and the file was not copied.
I also tried to use winrar to compress it and it runs into the same CRC error.
Q#1. What causes this CRC error? hard disk error or software?
Q#2. How to repair such CRC error?
Thanks.

Hi Peter,
The cyclic redundancy check, or “CRC” error, indicates a bad spot/corruptions within the file that you are trying to copy and in lot of cases with your hard disk.
To make sure if the problem is with the .ost file or your hard disk, you can fire up a Command Prompt window, and then copy the file to NUL:
C:>CD (path of your .ost file)
C:(path of your .ost file)>copy name.ost NUL
If this succeeds, the problem is with your .ost file. If this fails, it should be a hardware based disk issues.
If it's an issue with your .ost file, I'd suggest to run
scanpst.exe tool to repair your data file, then check if this fixed it.
When the issue is hardware based, you probably need to find Disk Errors in the System log of your Event Viewer. You can access the Event Viewer by going to:
Control Panel-> Administrative Tools-> Event Viewer
By the way, .ost file is actually a local copy of your mail items on the server. For a corrupted .ost file, you actually don't need to "copy the outlook.ost file to another location for repair". You can simply rename it to .ost.old
or delete it, and then re-launch Outlook to let it generate a new .ost file from server.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

I get an error when I try downloading files - 8520 Curve

I get an error when I try downloading files with my 8520 curve...and they say must contact my webmaster

Hello !
Could you please be more elaborative for explaining your issue?

I dont understand why i get this error when trying to type "else"

Hello Everybody,
Im new to java and am writing a simple program which gets a input number between 0 and 100 and is to print A for (grade>=90), B for (90>grade>=80) and so on, when grades < 60 get F.
i use a series of if/else, but when i get to the FINAL else it gets an error (red wavy line under the last else). this ruins the program bcoz now a grade 61 will output "D" AND "F".
can anyone explaing why this error msg? and how can i fix it?
this is the code:
public class Assignment02Q04 {
     public static void main (String[] args){
          int grade = (Integer.parseInt(args[0]));
          if (grade >= 90){
               System.out.println("A");}
                    else {if (grade >= 80){
                    System.out.println("B");}
                         else {if (grade >= 70){
                         System.out.println("C");}
                         else {if (grade >=60);{
                              System.out.println("D");}
                         else System.out.print("F");
     }

Please ignore the rude bits... this is a pro-forma post most often trotted out to suspected trolls... i.e. It's NOT directed at you personally.
h1. The Ubiquitous Newbie Tips
* DON'T SHOUT!!!
* Homework dumps will be flamed mercilessly.
* Have a quick scan through the [Forum FAQ's|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ].
h5. Ask a good question
* Don't forget to actually ask a question. No, The subject line doesn't count.
* Ask once
    - Don't Crosspost!
    - Two people answering one question independantly is a waste of there time.
* Don't even talk to me until you've:
    (a) [googled it|http://www.google.com.au/] and
    (b) looked it up in [Sun's Java Tutorials|http://java.sun.com/docs/books/tutorial/] and
    (c) read the relevant section of the [API Docs|http://java.sun.com/javase/6/docs/api/index-files/index-1.html] and maybe even
    (d) referred to the JLS (for "advanced" questions).
* [Good questions|http://www.catb.org/~esr/faqs/smart-questions.html#intro] get better Answers. It's a fact. Trust me on this one.
    - Lots of regulars on these forums simply don't read badly written questions. It's just too frustrating.
      - FFS spare us the SMS and L33t speak! Pull your pants up, and get a hair cut!
    - Often you discover your own mistake whilst forming a "Good question".
    - Many of the regulars on these forums will bend over backwards to help with a "Good question",
      especially to a nuggetty problem, because they're interested in the answer.
* Improve your chances of getting laid tonight by writing an SSCCE
    - For you normal people, That's a: Short Self-Contained Compilable Example.
    - Short is sweet: No-one wants to wade through 5000 lines to find your syntax errors!
    - Often you discover your own mistake whilst writing an SSCCE.
    - Solving your own problem yields a sense of accomplishment ;-)
h5. Formatting Matters
* Post your code between a pair of {code} tags
    - That is: {code} ... your code goes here ... {code}
    - This makes your code easier to read by preserving whitespace and highlighting java syntax.
    - Copy&paste your source code directly from your editor. The forum editor basically sucks.
    - The forums tabwidth is 8, as per [the java coding conventions|http://java.sun.com/docs/codeconv/].
      - Indents will go jagged if your tabwidth!=8 and you've mixed tabs and spaces.
      - Lines longer than 80 characters should be wrapped.
      - Proper indentation illustrates program logic.
* Post your error messages between a pair of {code} tags:
    - That is: {code} ... errors here ... {code}
    - To make it easier for us to find, Mark the erroneous line(s) in your source-code. For example:
        System.out.println("Your momma!); // <<<< ERROR 1
    - Note that error messages are rendered basically useless if the code has been
      modified AT ALL since the error message was produced.
    - Here's [How to read a stacktrace|http://www.0xcafefeed.com/2004/06/of-thread-dumps-and-stack-traces/].
* The forum editor has a "Preview" pane. Use it.
    - If you're new around here you'll probably find the "Rich Text" view is easier to use.
    - WARNING: Swapping from "Plain Text" view to "Rich Text" scrambles the markup!
    - To see how a posted "special effect" is done, click reply then click the quote button.
If you (the newbie) have covered these bases *you deserve, and can therefore expect, GOOD answers!*
h1. The pledge!
We the New To Java regulars do hereby pledge to refrain from flaming anybody, no matter how gumbyish the question, if the OP has demonstrably tried to cover these bases. The rest are fair game.
Edited by: corlettk on 17/03/2009 23:25 ~~ Doh!

Why I get an error when I call Snipping Tool with System Exec?

Hi to everyone, I want to call Snipping Tool from LabVIEW using the System Exec VI, but I always get an error 2; this not happen when I call another executables like calculator or paint; I hope someone can help me or tell me why this error occurs.
Thanks in advance, I have attached a couple of images of the VI that I have done so far.
Solved!
Go to Solution.
Attachments:
block diagram.PNG ‏11 KB

Hey there ;
I am guessing you are using the command: SnippingTool or SnippingTool.exe, just as you would use mspaint; but it is giving you Error 2; this is a Windows Issue more than a LabVIEW one, ,you can try using command:
C:\Windows\Sysnative\snippingtool.exe;
it worked for me; i found this info in the KB below.
Command Not Recognized When Using System Exec VI
Good luck

Why I get an error when running a sequence using the LabVIEW operator interface ?

I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
Thanks

Hello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering

Error when copying large (65bg) file to TC

I recently switched to aperture from iphoto and want to move my iphoto library file (65gb) to my time capsule for storage. I am using the hd in the TC for storage now, while my time machine backups go to a new external HD connected to the TC.
Problem is, when I try to copy the iphoto library file I get an error after it has copied 26.7mb. It says
"...can't complete the operation because some data in "iPhoto Library 1" can't be read or written. (Error code -36)"
So I rebuilt the library using iphoto library manager and had it put the new rebuild file on my TC. That worked, but the new file is 40gb instead of 65gb which is freaking me out.
I also tried making a copy to my internal drive to see if the file would copy at all. It did. Then I tried to move that file to the TC and got the same error, again at 26.7mb.
Any thoughts on why I can't copy this file? I have managed to write and read other files to the TC just fine. And the iphoto library file opens fine so it doesn't appear to be corrupt.

Hi Rudolf,
Thanks, I looked into the erro but it does not give any clue what could cause the error. It just says number of error exceeded. I looked into the access database table and data seems fine. Now I am not sure if the error is causing by the reading from access
or writing to the SQL server. Is there a way to find out what is causing the error?
Thanks.
Ripon

Getting: Unexpected Error when trying to upload files with my post!

Hello,
i tried today to post a reply to someone`s message t the forums but when i tried to attach 2 .php files i get unexpected error message and prevented me from posting the reply.
but when i delete or reloaded the page, i shows me an error message again, but the reply was posted without letting me know!
hope you can find a quick fix for that!
Best Regards
Waleed Barakat
[signature deleted by host]

waleed,
i tried today to post a reply to someone`s message t the forums but when i tried to attach 2 .php files
Did you really mean .php files? I am not sure if you can actually post a .php file. I suspect you will have to either post a link to where the .php files are located or simply post the contents of the .php file into the reply. OR zip the file and attach the .zip file.
I hope that helps.
Hopper

Getting an error when try to upload file , "The document you are trying to access is locked"

Hi All,
I have installed WCC11.1.1.6.0successfully and configured to Primavera P6EPPM P6R83 aplication.
when i try to upload file to P6 EPPM ,i am getting below error.
"*The document you are trying to access is locked. This can occur if the document is open, has been updated, or has been deleted by another user. Please refresh your data to see the latest information*."
Note: After refreshing the page, the folder is gone. It was uploaded successfully from repository .
Is there any setting for Folder Permissions in UCM11g?
Please take a look at this at earliest.
Thanks in advance.

If you have not seen this yet - https://docs.oracle.com/cd/E40872_01/English/Technical_Documentation/connecting_the_content_repository_to_primavera_unifier.pdf
HTH
- Anand

Getting a error when loading the flat file

Hi,
I have created a infoobject called ID and i have a attribute name.I have assigned a data source and done the update rules.When i try to upload the flat file i get a error.
Error 8 when compiling the upload program: row 227, message: A newer version of data type /BIC/CCDHIO_SRPID_ATT
I have faced this problem earlier but now i am not able to rectify it .Can someone suggest me what to do.I am working on 3.5 version.
Thanks
Regards
Harish

Hi,
Check the Flatfile Infoobjects and in datasource structure ,It should be same order and check whther you you are ignoring header rows or not in infopackage
Regards,
Marasa.

CRC error when uncompress the gtz file

I downloaded the 9 files of Oracle 8i for Linux, then concated
them together. But everytime when I tried to gunzip it or tar
it, I got this Incorrect Compressed Data - CRC Error. I thought
the problem was with the downloading, so I downloaded the files
again, but the problem still occurs.
Anybody knows how to fix this problem?
Thanks a lot
null

Chun (guest) wrote:
: I downloaded the 9 files of Oracle 8i for Linux, then concated
: them together. But everytime when I tried to gunzip it or tar
: it, I got this Incorrect Compressed Data - CRC Error. I
thought
: the problem was with the downloading, so I downloaded the
files
: again, but the problem still occurs.
: Anybody knows how to fix this problem?
: Thanks a lot
There is no way but download the files again.
As far as I know, you do that again.
null

Any help on why I get an error when running OA_UPLOAD_AND_LINK in background?

Hi experts,
I am attempting to run the OA_UPLOAD_AND_LINK program in the background to upload employee photos placed into a directory on a shared drive by each HR manager. When I check SM37, I see the job was cancelled and the error "Frontend parameter (parameter error)" Message no. OA501 was the reason.
If I run the program in the foreground using the same variant, I don't have any issues and the photos load just fine. Any suggestions on what parameter it's complaining about?
My goal is to schedule this program to run nightly and process any pictures in the shared drive. I'll have a second job remove the files from the shared drive at a later time.
Regards,
Garrett Meredith

FYI,
After looking at the code:
* reject process if running in background and frontend = 'X'
if sy-batch = 'X' and frontend = 'X'.
message id 'OA' type 'E' number '501' with 'Frontend'. "#EC NOTEXT
leave.
endif.
This is the code inside the program preventing it from running in the background. WHY!?! would they do this?
Regards,
Garrett

Why i get the error when i expdp data

处理对象类型 SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
ORA-39127: 调用 local_str := SYS.DBMS_EXPORT_EXTENSION.GET_DOMAIN_INDEX_METADATA
('TEGEOA_JC_5H_IDX','LANDINFO','SDO_INDEX_METHOD_10I','MDSYS',11.01.00.00.00,new
block,3) 时发生意外错误
ORA-01403: 未找到任何数据
ORA-01403: 未找到任何数据
ORA-06512: 在 "SYS.DBMS_EXPORT_EXTENSION", line 270
ORA-06512: 在 line 1
ORA-06512: 在 "SYS.DBMS_METADATA", line 5331
ORA-39127: 调用 local_str := SYS.DBMS_EXPORT_EXTENSION.GET_DOMAIN_INDEX_METADATA
('TEGEOC_JC_HOUSE_5H_IDX','LANDINFO','SDO_INDEX_METHOD_10I','MDSYS',11.01.00.00.
00,newblock,3) 时发生意外错误
ORA-01403: 未找到任何数据
ORA-01403: 未找到任何数据
ORA-06512: 在 "SYS.DBMS_EXPORT_EXTENSION", line 270
ORA-06512: 在 line 1
ORA-06512: 在 "SYS.DBMS_METADATA", line 5331
ORA-39127: 调用 local_str := SYS.DBMS_EXPORT_EXTENSION.GET_DOMAIN_INDEX_METADATA
('TEGEOL_JC_5H_IDX','LANDINFO','SDO_INDEX_METHOD_10I','MDSYS',11.01.00.00.00,new
block,3) 时发生意外错误
ORA-01403: 未找到任何数据
ORA-01403: 未找到任何数据
ORA-06512: 在 "SYS.DBMS_EXPORT_EXTENSION", line 270
ORA-06512: 在 line 1
ORA-06512: 在 "SYS.DBMS_METADATA", line 5331
ORA-39127: 调用 local_str := SYS.DBMS_EXPORT_EXTENSION.GET_DOMAIN_INDEX_METADATA
('TEGEOP_JC_CTRLPNT_5H_IDX','LANDINFO','SDO_INDEX_METHOD_10I','MDSYS',11.01.00.0
0.00,newblock,3) 时发生意外错误
ORA-01403: 未找到任何数据
ORA-01403: 未找到任何数据
ORA-06512: 在 "SYS.DBMS_EXPORT_EXTENSION", line 270
ORA-06512: 在 line 1
ORA-06512: 在 "SYS.DBMS_METADATA", line 5331
ORA-39127: 调用 local_str := SYS.DBMS_EXPORT_EXTENSION.GET_DOMAIN_INDEX_METADATA
('THGEOA_JC_5H_IDX','LANDINFO','SDO_INDEX_METHOD_10I','MDSYS',11.01.00.00.00,new
block,3) 时发生意外错误
ORA-01403: 未找到任何数据
ORA-01403: 未找到任何数据
ORA-06512: 在 "SYS.DBMS_EXPORT_EXTENSION", line 270
ORA-06512: 在 line 1
ORA-06512: 在 "SYS.DBMS_METADATA", line 5331
ORA-39127: 调用 local_str := SYS.DBMS_EXPORT_EXTENSION.GET_DOMAIN_INDEX_METADATA
('THGEOC_JC_HOUSE_5H_IDX','LANDINFO','SDO_INDEX_METHOD_10I','MDSYS',11.01.00.00.
00,newblock,3) 时发生意外错误
ORA-01403: 未找到任何数据
ORA-01403: 未找到任何数据
ORA-06512: 在 "SYS.DBMS_EXPORT_EXTENSION", line 270
ORA-06512: 在 line 1
ORA-06512: 在 "SYS.DBMS_METADATA", line 5331

but i get this information from dba_index and sdo_index_metadata
INDEX_NAME INDEX_TYPE DOMIDX_STATUS
TEGEOA_JC_5H_IDX DOMAIN VALID
TEGEOA_JC_5H_CODE_IDX NORMAL
SQL> select count(*) from sdo_index_metadata where sdo_index_name='TEGEOA_JC_5H_IDX';
COUNT(*)
0

Getting an error when Importing a security file

Hi,
Im struggling to import a security file into planning..this is the error i get
Enter password: Tue Mar 30 09:30:53 SAST 2010 :: Validating the Secfile.txt...
Tue Mar 30 09:30:53 SAST 2010 :: ---------------FILE NOT FOUND EXCEPTION COMING-------
The server is running unix: I'm running the command from the directory where the ImportSecurity.sh utility is...I have also copied the secFlie.txt file into the same directory. But still get the same error.

There is a slight issue with the unix versions
If you use the exportsecurity utility it will create a file called :- secFile.txt
When you use the importsecurity utility it looks for a file called :- Secfile.txt
As it is case sensitive you have to update the exported secFile.txt
Cheers
John
http://john-goodwin.blogspot.com/

Error when Writing Metadata to Files in Bridge (Mac) but not in Bridge (PC)

We get an error when writing metadata to files in Bridge (Mac) but not in Bridge (PC). In the same drive and folder, the PC can successfully write a keyword to a file on the PC, where the Mac returns an error. I have researched this at the Adobe Knowledgebase, but their answer seemed to indicate it was a global issue, and we don't see that behavior on the PC.
The client is a Mac of course, and the server volume is a Windows share volume. The Mac is bound to AD, and the domain\username and username formats have both been tried when logging in, but you receive the error in both.
Any help would be appreciated.
Thanks!
Rich Oliver

Hi, I'm having the same problem using FreeNAS (which uses Samba and Netatalk in the backend), but I tried with both AFP and SMB on Mavericks and Yosemite, I still have the same issue. I think it might be a timing issue with how lightroom interact with a slower write delay using network shares. I suggest you also chime into this thread: Lightroom 5 can't write metadata to DNG files I really hope this is resolved as this is impacting my productivity as I moved my workflow to my Macbook with a shared NAS.

Get 8004 error when using copy past command transferring pictures from one USB drive to another, why ?

Why do I get 8004 error, when I use copy past command to transfer pictures from one USB drive to another ?
There is no problem if the second drive is empty.

mumbles27 wrote:
one is MS-DOS
would that be in FAT32 or NTFS ?
mac OS extended (case sensitive)
i'm not 100 % sure but i have a fancy such a combination may not play well together.
nothing bigger than 2GB for one file
i was asking because FAT3 has a limitation in that it will not allow you to copy files larger than 4 GB.
JGG

Why I get CRC error when copying outlook.ost file?

Similar Messages

Maybe you are looking for