Why is audio missing from some news app videos

No audio for: CNN, DISCOVERY, PBS, 60 Minutes,
AUDIO OK FOR: NYTimes, ABC, The Daily, FOX News

Similar Messages

Why is audio missing from movie

why is audio missing from movie

I think I may have confused you a little bit, sorry. Hope this might be easier to follow.
1. Copied nieces VHS tape to DVD discs. Tape runs approximately 2hr. 39min.
2. Put first part on work copy 1. This consisted of the lead up to the ceremony and the ceremony itself, ending with still shots of the wedding party, in the park. About 1hr. 1min.
3. Put second part on work copy 2. This consisted of the wedding reception, beginning to end. About 1hr 38min. No possibility of overlapping content.
4. Ran both work copy 1 and work copy 2 on the VCR that's hooked up to the TV. (Not the Toshiba copy machine). Both ran through, beginning to end with no glitches.
5. Opened Adobe Premiere Elements and loaded work copy #1 so as to make three finished copies, one for bride and groom, one for bride's parents, one for groom's parents.
6. When placed on the timeline, contents of work copy 1 had no audio for VTS_01_1.VOB while VTS_01_2.VOB and VTS_01_3.VOB were whole.
7. Tried for several days to eliminate the problem with no success. A.P.E. showed file sizes of .99GB, .99GB and 47MB respectively. The 47MB is actually about 2 minutes of still pictures of       the wedding party. I was not going to attempt to burn the project until correcting the audio problem.
8. Wrote in to the community forum and happily received your response. Tried every thing you offered without success. Though I am thankful for all your time and effort. While nothing worked       so far, I have learned a few things and will retain my notes so as to keep this information at hand. (Don't know how you're able to maintain all that info).
9. At this point, in view of the results of step #4, I thought to try Windows DVD Maker to see what developed. Loaded work copy 1 into that program, which recognized the audio in the first clip       (VTS_01_1.VOB). I did not run the work copy, beginning to end, in this program. But I felt that as long as the audio was present in the first clip, this program would allow me to burn the           copy. When the burn button was pushed, I received the error message "Will Not Fit", and the duration of 30 min for clip 1, 30 min. for clip 2 and 25 hours and 30 min. for clip 3. Clip 3 being       the 2 minutes of still pictures. After trying unsuccessfully to remedy this problem it was time to try a different approach.
10. Opened A.P.E. and loaded work copy 2 onto the timeline. Successfully made three finished copies of this disk in a short period of time.
11. Took the VHS tape back to the Toshiba to make another copy (work copy 1A) of the first segment.
12. Played copy 1A in the TVs VCR and it played fine, no glitches.
13. Opened A.P.E. and put work copy 1A on the Timeline. This time there was audio in clip 1, which could be seen on the audio line, but it was the audio from work copy 2. This, even though       I had deleted the files from work copy 2.
14. Accepted the fact that this has become a career. Can't imagine what you're thinking. Since beginning this endeavor I have become much older and grouchier. My dog will no longer walk         with me. Neighbors go back in the house when they see me coming. Oh, and my wife sticks out her tongue and makes funny noises whenever I turn my back.

Why is audio missing from MP4 video?

I am using - - Adobe Premiere Elements 10, Windows OS7
I have 11GBs of high quality (1.5GB = 15 min) mp4 video clips and I would like to edit and burn a couple of DVDs. When I import the clips they look fine, but there is no audio. (Yes, I have audio elsewhere on my computer and can hear these clips when I use any other player.)
I tried converting them to .avi with Format Factory and I *can* hear them when I import to Adobe, but they are now "frozen" or "jumpy" and it is very difficult to navigate through the clips because the Play/Pause button has quite a time lag before responding.
Should I convert to some other format? I'd like to keep as much quality as possible. I did convert them all to VOBs and made a "test" disc, but it dropped 11GB down so low that it will all fit on a 4.7GB disc. I'd rather make 2 discs and keep the quality up (though the one I made looks and sounds pretty good).
Any suggestions would be appreciated. Thanks.

Val8583
Let me recap to make sure we are in sync on this.
Knowing what you started with and the video properties as they evolve through needed conversion....
You come telling us and demonstrating to us that you have source video
AVCHD.mp4 (1920 x 1080 @ 29.97 frames per second) and that has MPEG1 audio.
When you import that into Premiere Elements 10 Windows, you get video but no audio.
The destination for that Timeline is NTSC_Widescreen Dolby DVD.
In terms of setting the correct project settings, it would be important to know if you have
interlaced or progressive video. But, since you not hear audio at that point, more
important/pressing things to pursue.
Aside from the pressing audio issue, at this point the choice of project preset would still be
NTSC/AVCHD/Full HD1080i30 (if you have interlaced video)
or
NTSC/DSLR/1080p/DSLR 1080p30@ 29.97 (if you have progressive video).
Either way, we need a 1920 x 1080 frame size project preset to match the 1920 x 1080 frame size of your source so that
when you are in the Edit area you can edit your video in the correct space there. The final export setting is another matter. You
should not be using a NTSC DV Widescreen project preset for a 1920 x 1080 video import.
AVCHD.mp4 with MPEG1 audio (no Premiere Elements sound) to ????.avi with ???? audio (unstable in Premiere Elements but with sound)
Conversion of the problem file sounds like a reasonable next step. And, you indicate that you do convert
to an ".avi" file which has then has audio with the video in Premiere Elements 10, but the file is highly
unstable in Premiere Elements 10. But, when I ask what video compression goes with the .avi wrapper, you
wrote
I just drag/drop the files to "Convert All to (whatever)" and the software does it.
All .avi files are not created equal. And, AVCHD.avi, if that is what you ended up with, is highly unstable, and for most will
not import into Premiere Elements. So, now the pressing questions include:
a. what is the video compression and audio compression and other properties of this .avi file with the stability problems in Premiere Elements 10
b. again, what are you setting as the project preset to match the properties specific to the source .avi.
Now back to the present
If you use Format Factory you should have control over your conversion settings. AVCHD.mp4 is a stable format for Premiere Elements. I suspect that the MPEG1 is problem. So, we agree conversion is the way.
I would suggest taking the time to set the settings for your converter so that you produce AVCHD.mp4 (1920 x 1080 @ 29.97 progressive frames per second) and use AAC Stereo for the audio. Then bring that file into Premiere Elements 10 with the project preset of
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
and proceed, ending with the Share/Disc/DVD disc with preset = NTSC_Widescreen_Dolby DVD.
Since this project is destined for DVD-VIDEO widescreen on DVD, you could use your converter to produce NTSC DV AVI Widescreen and then import that into a Premiere Elements 10 project with the project preset =
NTSC
DV Widescreen
and proceed, ending with the Share/Disc/DVD disc with preset = NTSC_Widescreen_Dolby DVD.
As for disc capacity, the standard DVD disc 4.7 GB/120 minutes is in reality 4.38 GB. And the DVD disc double layer single sided 8.5 GB/240 minutes is in reality 7.38 GB. When you get to the burn dialog Quality Area (just before you hit Burn), look to see the values for Space Required and Bitrate (have a check mark next to "Fit Content to Available Space"). If you see a Bitrate reading below the max 8.00 Mbps, then go to the DVD double layer single sided disc or use two DVD standard discs.
Do your intended viewers have players that support playback of DVD double layer single sided discs?
Please review.
I will try to make the reply not so long next time. I wanted to cover all the bases this time.
We will be watching for your progress.
Any quesitons or need clarification on anything, please do not hesitate to ask.
Thank you.
ATR

Why is Podcast missing from the Music App. in iOS7

I'm dissapointed on the fact that Podcasts are no longer supported by iOS7's music app.
I used it on a daily basis and its hard for me to believe that Apple purposely made this change. I hope this is just an error which can be acceptable and hopefully fixed soon.
Apple..... I hope you're listening...

Which is a horrible app that shows every **** podcast you subsctribe to, whether or not you have a new episode, and doesn't let you arrange them properly to only show unplayed episodes. It's also a completely needless app since the Music app handles podcasts just fine.

Audio missing from saved project

Hi All...
New user here, first-time "test movie" combines video with ambient audio, stills and a music track. Based on Mr. Hunt's article, here's the background information:
Dell Precision T1500 / Windows 7 Professional 64-bit OS, no pen or touch input
Processor: Inter Core i7CPU 870 @ 2.93 GHz
Installed memory: 8 GB
Single hard drive: 930 gb SATA file system, NTFS, compression unchecked / no RAID
"D" drive is HL-DT-ST- DVD+-RW GH50N DVD burner
"E" drive is HL-DT-ST BD-RE BH30N CD ROM drive
No external drives
Virtual memory: 8151 mb dynamically controlled by windows
Video Card: NVDIA QUADRO FX 580 / pci BUS 1 / driver no. 8.17.12.5896, driver date 7-9-2010
Audio System: Realtek high definition audio, 2-channel 16-bit 48000Hz / driver version 6.0.1.5919 / driver date: 8-18-09
Using PE 8.0.1, updated July 14
Project settings: Editing Mode: HD 1080i, timebase 29.97 fps, frame size 1920 x 1080, 16:9 / pixel aspect ratio: square pixels (1.0) / Fields: No Fields (progressive scan) / Display Format 30fps drop-frame timecode / title safe area 20 % / action safe area 10 % audio sample rate: 48000 Hz
Video clips: MPEG movies, image size 1440 x 1080, pixel depth: 32, frame rate 29.97. Average data rate 630-650 KB/second (there are a couple dozen clips, I didn't check them all...)
Source audio format: 48,000 Hz Compresses stereo; project audio format 48,000 Hz 32-bit floating point stereo
Music track: MP3 source audio format: 44,100Hz compressed stereo; project audio format 44,100 Hz 32-bit floating point stereo; average data rate 23KB/sec
Still images: all JPEGs, some 1280 x 960, some 2048 x 1636, pixel depth 32, pixel aspect ratio 1.0.
Other app's typically running: IE and/or Firefox, perhaps MS word and/or Publisher, Mozilla's Thunderbird. However, I've "saved" this project with *no other apps* running, and there's still no audio.
Hope all this suggests a solution...
Thanks for your help, all...
T

Thanks for all this information, T.
So why are you editing a 1440x1080 video in a 1920x1080 project? If this is AVCHD footage, it's very important to use the right project settings.
That has no effect on your audio, of course. But it could affect your video quality when you output your file.
That say, can you explain what you mean by "Audio missing from save project"?
Do you mean that you don't hear the audio in Premiere Elements -- or that you don't hear it when you output, say, an MOV or WMV file?
What file format are you exporting and what are you playing soundless this file on?
And, finally, is there no audio whatsoever, or is only some audio (music, for instance) missing from your output?

Why is help missing from help dropdown menu?

Why is help missing from Ps CC help dropdown menu in preferences?

bumpkin wrote:
Why is help missing from Ps CC help dropdown menu in preferences?
???? I see help being shown in some of Photoshop preferences pages but both of you questions confuse me.

Why i cannot download From any site short videos ntwith Iernet Download Manager in new Mozilla Firefox?

'''
Why i cannot download From any site short videos with Iernet Download Manager in new Mozilla Firefox?'''
I want to install the new version,but the Last one it is
Better.
Thank you ...

You need to update Firefox to 3.6.17 via Help | Check For Updates.
Then install this add-on: https://addons.mozilla.org/en-US/firefox/addon/flash-video-downloader-youtube/
Some security issues affecting your system.
Go to Tools | Add-ons | Plugins and disable "Fun Web Products Plugin". This is spyware.
Update the following plugins. 
* Adobe Flash via http://get.adobe.com/flashplayer/ 
* Adobe Shockwave For Director via http://get.adobe.com/shockwave/ 
* Adobe Reader via http://get.adobe.com/reader/?promoid=BUIGO 
* Java via http://www.java.com/en/ 
Here's the relevant Adobe security advisory: http://www.adobe.com/support/security/advisories/apsa11-02.html

"Princeton" font is missing from my new iMac. How can I obtain it?

"Princeton" font is missing from my new iMac. How can I obtain it?

A simple Internet search reveals a number of places to download it for free. By the way, the Princeton font is not a default included font with OS X.

HT1918 I have my iPad from a US store (Miami). Why I cannot buy from the US app store?

I have my iPad from a US store (Miami). Why I cannot buy from the US app store?

Are you in the US with a US based account and a US billing address ? If you aren't then you can't buy from the US store - you can only buy content from your own country's store. If you are in the US then do you get any messages when you try to purchase from the store ?

Itunes radio icon is missing from my music app on my ipod touch 5. how do i get it back?

Itunes radio icon is missing from my music app on my ipod touch 5. how do i get it back?

If you are in the USA (iTunes Radio is only USA now)
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
It worked for others

I was downloading some new apps on my new iphone 5s that it turned off , I tried to restore it , but I couldn't

I was downloading some new apps on my new iphone 5s that it turned off , I tried to restore it , but I couldn't

Try:
Broken headphone jack! 3.5mm dillemma....: Apple Support Communities

Does the EQ setting affect only audio played from the Music app?

Does the EQ setting in Settings -> Music affect only audio played from the Music app or does it also affect any other audio? Specifically, I'd like to know if the setting is applied to audio podcasts that are played from Downcast. Thanks!
--VV

They will only affect the Music app.

Analogue Stereo Audio Output from the New Mac Pro

Does anyone know what the analogue stereo audio output from the new Mac Pro is? From the specification, there appears to be a stereo output for headphones, but it is unclear what other audio outputs are available and whether a stand-alone amplifier is required to drive small stereo speakers. Yan (UK)

It is line-level. You will need powered speakers or an amplifier.

I cant watch youtube vids, listen to music from some sites or videos from FB or anywhere else. Help!

I cant watch youtube vids, listen to music from some sites or videos from FB or anywhere else. Help! I have read some of the help answers but the Flash settings change hasnt helped me. I am on tumblr, soundcloud, Fb etc and Im frustrated that I cant play music or watch videos without switching to IE or AOL. :(

First off, you are on a VERY out of date version of Firefox, which could be the problem, but is also leaving you wide open to attack from many different security holes. You first thing to do is to go to [http://www.getfirefox.com www.getfirefox.com], download the newest version to your computer and install it.
AFTER doing that, do the following:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
and finally, if you still are having trouble, reset Firefox. [[Reset Firefox – easily fix most problems]]

Why are Albums missing from the Albums "tab" in Photos app?

I just upgraded to the new version of OS X with the new Photos app. All of my photos transferred over to the new app correctly, but not all of my Albums are showing up in the new Albums "tab" in the Photos app.
For instance, my "Honeymoon" album does not show up on the Albums "tab," but when I search for in the Photos app it will appear.
How do I get all of my Albums to show up on this tab?
Additionally, does anyone know how to change the "timestamp" on photos?
Any help would be greatly appreciated!

Terence,
I appreciate the reply, but that did not solve my issue. Several of my albums are still "missing" from the list, even though I can find them when I search:

Why is audio missing from some news app videos

Similar Messages

Maybe you are looking for