Why is iPhoto rotating my photos when I import them from my iPhone?

I have the latest iPhoto software and am using an iPhone 6.
This was happening with my iPhone 5 as well.
When I import my photos they are all rotated once counter clockwise.  The only photos that get imported without being rotated are photos that have been manipulated(like Instagram posts, of edited photos or screen shots of my iPhone).
Does anyone have any idea why this happens/how I can stop it?  I have thousands of photos rotated once counter clockwise with instagram and edited photos sprinkled throughout, so I can't even select them all and rotate them because then I would just be messing up the photos that imported fine.
Thanks.

In what orientation were the photos taken, i.e. portrait or landscape?  As a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos from your iPhone and test to see if the same problem persists. Does it?

Similar Messages

  • Iphoto removes my pics when i remove them from my iphone.  how do i keep on iphoto

    I am trying to free up space on my iphone by removing pictures that are already on my computer on iphoto. When I remove a picture, it removes it from iphoto too; but I want to keep it there

    In iPhoto on your computer, add the photos in the iCloud section to the Events, Faces, Places section before you delete them. In the future you can make that happen automatically for new photos by going to iPhotos > Preferences > iCloud and setting Automatic Import to on.

  • Why does aperture convert my raw files to jpegs when I import them from iPhoto?

    Why does aperture convert my raw files to jpegs when I import them from iPhoto?

    It doesn't.
    When you import  Raw to iPhoto the app makes a jpeg preview of the Raw automatically. When you import from iPhoto then Aperture brings over both versions.
    Regards
    TD

  • I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

    I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT4436 Why is my daughter receiving my text messages on her itouch when I send them from my iphone? We are both on icloud so how can I separate the two? Do I need another icould or apple account??

    Why is my daughter receiving my text messages on her itouch when I send them from my iphone? We are both on icloud so how can I separate the two? Do I need another icould or apple account??

    It's happening because you are using the same Apple ID for iMessage.  You don't need to do anything with your iCloud account to fix this.  You should create a separate Apple ID for her device to use with iMessage and FaceTime.  (You can continue to share the same ID for purchasing from the iTunes and App stores if you wish; it doesn't need to be the same as the ID you use for other services.)  Once you've done this, on her device go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with the new ID.  Do the same thing in Settings>FaceTime.
    Another caution is that if you share and iCloud account with her, any data you both sync with the account such as contacts, will be merged and the merged data will appear on both devices.  If you don't want to end up with each other's contacts, calendars, etc. on your devices, you should have separate iCloud accounts to.  If you want to make this change, go to Settings>iCloud on her device and tap Delete Account.  (This only deletes the account from the device, not from iCloud.)  When prompted about what to do with the iCloud data be sure to choose Keep On My iPod.  Then set up a new iCloud account with her new ID, turn on iCloud data syncing again, and when prompted choose Merge.

  • TS2289 I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

    I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

    What version of iMovie?
    What camera?

  • How do i avoid from photos getting deleted that were stored in iCloud photo library when i delete them from my iphone?

    How do i avoid from photos getting deleted that were stored in iCloud photo library when i delete them from my iphone?

    You can't delete it from your purchased list, as that is permanently maintained by the iTunes store.  You can, however, prevent it from appearing in your song list by going to Settings>iTunes & App Store and turning off Music under Show All.

  • When I import video from my iphone to imovie it doesnt look right, it makes everyone look wider and shorter. Is there a way to fix this?

    When I import video from my iphone to imovie it doesnt look right, it makes everyone look wider and shorter. Is there a way to fix this?

    This is close.  I did a bit more digging I have found a few more things.   It appears that the input dialog is a read once on connect and then it never updates.  I had my iPhone connected to my Mac when I did my convert from FILMiC Pro to my Camera Roll.  Just on a whim, I dissconnected my iPhone with FCPX open and then connected it again.  This time when I opened up the Import window the movie I converted showed up.   It appears my issue may have simply been related to the specific series of operations that I happened to use at the time I was trying to perform an import to FCPX.
    One last item of note.  There is a movie in my Camera Roll that FCPX still does not see.  This was a movie shot by my son-in-law of my grandaughter on his iPhone and then it was sent, via message, to my iPhone.  Obviously it is a highly compressed video of unknown compression and frame rate.   Regardless, FCPX does not see this video.  I'm guessing it is not a .mov quicktime file but some other format specific to imessage video.
    Thanks for the help Russ.  It at least pointed me in the right direction.  I understand why no one else could comment as I'm guessing no one else has had an issue.  A very subtle "feature".

  • I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

    I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

    ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
    to setup a comcast imap account on your iphone:
    go to mail, contacts, etc in settings
    under accts, select add account
    select "other"
    new screen, choose "add mail account"
    now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
    hit next
    then the acct verifies
    when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
    select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
    then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone.  The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

  • Where are my photos when I save them from facebook?  They are not in the photo stream.

    The photos cannot be located in the photos stream in either location.

    In what orientation were the photos taken, i.e. portrait or landscape?  As a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos from your iPhone and test to see if the same problem persists. Does it?

  • Why are forms or passwords not filled, when I imported them from Safari?

    I've used the Import function to import "saved form history" from Safari, twice already, both times it says it completed the task, yet whenever I go to a site requiring passwords or forms filled out, nothing happens, & I must manually fill everything out! Why is this not working?

    The form history will not include passwords. Firefox can not access the passwords from Safari so can not import them.

  • Is it possible to delete Outlook emails when I delete them from my iPhone 4?

    I use Outlook 2002 on my PC with Road Runner as my carrier. Is there a way to set my email account up so that when I delete an email from my iPhone that it will delete it from Outlook? This worked on my Blackberry but won't work on my iPhone.

    If they support IMAP, make sure both outlook and the iPhone are configured to use it. This will completely synchronize both devices. Messages deleted on one will be deleted on all (including the server). Same goes for filing messages in folders.

  • Bridge is opening all of my RAW files as jpegs when I import them from iPhoto

    I have set my iPhoto preferences to send my RAW photos as RAW when using an external editor. If I only use ACR, this works fine, but if I want to use CS4 they are all coming over as jpegs and I then have to work w them as jpegs. I have PSE 8 . Do I have to do something before I open CS4 to have them come over in RAW format?

    Not Very familiar with iPhoto but I think you do confuse two approaches for
    your files. If you choose to work from iPhoto it takes the originals but
    when using Bridge it might be an exported version in jpeg.
    If you have PSE 8 with Bridge CS4 I would suggest you make a choice in
    workflow and use Bridge as starting point. You can import your Raw files in
    Bridge using Photodownloader (get photo's from Camera in Bridge) preferable
    use a card reader for this.
    And/or copy the older original Raw files to a new folder.
    You can find the originals that have been imported using iPhoto in the
    picture folder/iphoto library. Click on the icon and with right mouse click
    choose show package content. In this new window you will see a file called
    originals with subfolders. Inhere find the ones you want and copy them to a
    new folder from your choice (either in the picture folder or elsewhere, but
    obvious not in the package window for iPhoto, you won't see them after you
    closed the package content window...)
    Choose copy because in this way your iPhoto library and folder structure
    stays as it is.
    Now point Bridge to the folder with this copied files and let it cache the
    files first (takes some time).
    With this workflow you can manage your Raw files (rate, rename, adding
    metadata and keywords etc.) and develop them in ACR and PSE. If you do want
    to use the album structure from iPhoto you can choose to save your developed
    files either as jpeg or tiff and place them in iPhoto.
    It might be a better workaround because iPhoto is not the best application
    to handle and develop Raw files, you have a lot more options in Bridge and
    PSE
    I have set my iPhoto preferences to send my RAW photos as RAW when using an
    external editor. If I only use ACR, this works fine, but if I want to use CS4
    they are all coming over as jpegs and I then have to work w them as jpegs. I
    have PSE 8 . Do I have to do something before I open CS4 to have them come
    over in RAW format?

  • IPhoto - I deleted photos by mistake, restored them from an external hard drive, now the photos can't be edited, moved, or anything????

    Please help. When I click on an affected photo, a grey exclamation mark shows up. Some photos were restored properly most were not.

    The exclamation mark is an indication that the file path/link to the orignal file has been broken. Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    iPhoto 8 (09) and earlier- run the options indicated
    iPhoto 9 (11) and later- run  Option #4 to rebuild the database
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager (iPhoto 8 or earlier or IPhoto 11 and later) and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the
    File ➙ Rebuild Library (iPhoto 8 or earlier)
    or
    Library ➙ Rebuild Library (iPhoto 9 or later)
    menu option to rebuild the library.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • How do I get ALL the photos off my phone on to an external drive? When I import them from my phone it only moves the ones from the last time I plugged I plugged my phone in. How do I go back and grab all those other photos?

    I h

    When I open my computer and move the DCIM folder to the external drive and then open it it's empty. I've synched my phone and the photos are taking up all the space on my pc and my phone.

Maybe you are looking for

  • [SOLVED] xfce+slim, suspend to RAM causes black and white strips

    I recently installed a fresh copy of Arch. When I click the "suspend to RAM" xfce button the screen turns off as it should, but when I try to resume I see 5 columns of black and white stripes (like a flattened checkerboard ). Alternatively when I cli

  • Data Source CE in Visual Composer

    Hello Experts, we are running on CE 7.2. I wanted to read BPM  task details into a custom application or generate a report of who has claimed the task,currently being processed by whom  and the history of this information relating to every task in uw

  • Connect to 2 Networks?

    How do I utilize my internal network (std 192.168.x.x config) with my corporate network (which uses a 172.16.x.x config)?  Both are set up to use 255.255.255.0 subnet. I configured the router with a subnet of 255.255.255.128 but I don't know what to

  • Invoice report by document value

    Hi Gurus, I need your assistance in producing a report. Basically we need to get a report showing how much invoices we have entered on a Sales Org with a value below £250.00 for the last 3 months (Oct, Nov & Dec). Can you please advise how I should p

  • Update a table from other table

    Hi Guys, I have 2 tables i.e. tableA, tableB both have same structure. I want to update tableA with tableB's data using a unique column in both table. Which is the easiest way to do that? Thanks,