Why is my calendar not holding the correct color. I have reset the color of a particular calendar posting and within second the color reverts to purple.
Why is my calendar not holding the set color. I have reset the color of a particular calendar and within seconds it reverts back to purple. I am using ICloud on a calander linked to my IPhone and IPad.
set them at icloud.com on a computer. its a work around. Peace, Clyde
Similar Messages
-
My ipad mini 3 is not showing that it is connected to the wifi, but it is saying it is not connected to the internet. I have reset network settings and then reset all settings and it has not worked. I have tried to change it to static and change the IP address and the subnet mask and that is not working either. I have also tried to use the wifi in different places and that doesn't work either. Please help!!!! iPad is useless without the internet.
1. Set router back to Auto DHCP.
2. Turn off router for 30 seconds and on again.
3. Re-boot iPad. -
Why does my ipod not hold the battery charge
my ipod has to be plugged in to come on and most of the time it wont come on it will just bring on the apple start up logo and then shut back off it keeps repeating this action
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Why is my battery not holding a charged now that I have ios7 on my iPhone 4
Why is my battery not holding a charged now that I have ios7 on my iPhone 4
The same is happening to me on my 4 and 4S... Before the software update my battery used to hold up to 1 day for both 4 and 4S. Now I have to charge twice a day the iPhone 4 and three times a day the 4S. Apple should really fix it... I hope they release a new update for iPhone 4 and 4S users...
-
Why are my videos not playing the right way up
Why are my videos not playing the right way up
I took four video clips while on a trip this week. Two are oriented the right way (playing wide on the device and imported correctly). The other two are Tall and not oriented right. Orientation is 90 degrees to the right. I don't know why this is happening on occasions. Even some pictures I took did the same **** thing. It's weird. And I can't figure it out. The camera is held the way I want the pictures and videos to be recorded and played but something internal is turning these videos and pictures 90 degrees clockwise.
-
Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferences i choose. Anyone else have any other ideas? I am about to lose my mind... I hate you ADOBE!!!
that s just the problem, that is why my level of frustration is boiling over ... I have told InDesign over and over again "Do Not Show Again" but it will just not hold the settings. It might hold it for a day or so, but then suddenly there it is again on another launch. Very very annoying.
-
After installing IOS7 on my IPad2, it takes a very long time to charge and does not hold the charge. Should I uninstall IOS7, how do you do that? HELP!!
Do you have the cover on your ipad? If so you may need to go into settings>General and turn on lock/ unlock so that it goes into standby when cover is closed. Not sure this is your problem but it was why my battery didn't last long. As far as long charge time goes I have noticed it is taking longer to charge also. Hope they fix some of these bugs in the first update.
-
Why my ipad can not update the ios7.1.1
why my ipad can not update the ios 7.1.1
Hello there, crivera350.
The following Knowledge Base article offers up some great steps for if you are unable to update your iOS device:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?
Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.
-
Why is this query not using the index?
check out this query:-
SELECT CUST_PO_NUMBER, HEADER_ID, ORDER_TYPE, PO_DATE
FROM TABLE1
WHERE STATUS = 'N'
and here's the explain plan:-
1
2 -------------------------------------------------------------------------------------
3 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)|
4 -------------------------------------------------------------------------------------
5 | 0 | SELECT STATEMENT | | 2735K| 140M| 81036 (2)|
6 |* 1 | TABLE ACCESS FULL| TABLE1 | 2735K| 140M| 81036 (2)|
7 -------------------------------------------------------------------------------------
8
9 Predicate Information (identified by operation id):
10 ---------------------------------------------------
11
12 1 - filter("STATUS"='N')
There is already an index on this column, as is shown below:-
INDEX_NAME INDEX_TYPE UNIQUENESS TABLE_NAME COLUMN_NAME COLUMN_POSITION
1 TABLE1_IDX2 NORMAL NONUNIQUE TABLE1 STATUS 1
2 TABLE1_IDX NORMAL NONUNIQUE TABLE1 HEADER_ID 1
So why is this query not using the index on the 'STATUS' Column?
I've already tried using optimizer hints and regathering the stats on the table, but the execution plan still remains the same, i.e. it still uses a FTS.
I have tried this command also:-
exec dbms_stats.gather_table_stats('GECS','GEPS_CS_SALES_ORDER_HEADER',method_opt=>'for all indexed columns size auto',cascade=>true,degree=>4);
inspite of this, the query is still using a full table scan.
The table has around 55 Lakh records, across 60 columns. And because of the FTS, the query is taking a long time to execute. How do i make it use the index?
Please help.
Edited by: user10047779 on Mar 16, 2010 6:55 AMIf the cardinality is really as skewed as that, you may want to look at putting a histogram on the column (sounds like it would be in order, and that you don't have one).
create table skewed_a_lot
as
select
case when mod(level, 1000) = 0 then 'N' else 'Y' end as Flag,
level as col1
from dual connect by level <= 1000000;
create index skewed_a_lot_i01 on skewed_a_lot (flag);
exec dbms_stats.gather_table_stats(user, 'SKEWED_A_LOT', cascade => true, method_opt => 'for all indexed columns size auto');Is an example. -
How to hold the values as it's not holding the values when it cross 255
DATA : fval1 TYPE edidd-sdata.
DATA : fval2 TYPE edidd-sdata.
DATA : fval3 TYPE edidd-sdata.
DATA : fval4 TYPE edidd-sdata.
DATA : fval5 TYPE edidd-sdata.
DATA : len(3) TYPE n.
values1 = wa_final-low.
values2 = wa_final-high.
IF wa_final-high IS NOT INITIAL.
CONCATENATE values1 values2 INTO fval1 SEPARATED BY '-'.
ELSE.
fval2 = values1.
ENDIF.
IF fval3 IS NOT INITIAL.
IF fval1 IS NOT INITIAL.
fval = fval1.
CONCATENATE fval3 fval INTO fval3 SEPARATED BY '/'.
ENDIF.
IF fval2 IS NOT INITIAL.
fval = fval2.
CONCATENATE fval3 fval INTO fval3 SEPARATED BY '/'.
ENDIF.
ELSE.
IF fval1 IS NOT INITIAL.
fval3 = fval1.
ENDIF.
IF fval2 IS NOT INITIAL.
fval3 = fval2.
ENDIF.
ENDIF.
DATA : len(3) TYPE n.
len = STRLEN( fval3 ).
IF len > 250.
fval4 = fval3+0(250).
fval3 = fval3+250(5).
* CONCATENATE fval4 fval3 INTO fval5.
ENDIF.
IF fval4 IS INITIAL.
wa_final1-varbl31 = fval3.
ELSE.
CONCATENATE fval4 fval3 INTO fval5.
wa_final1-varbl31 = fval5.
ENDIF.
MODIFY it_final1 FROM wa_final1
TRANSPORTING varbl31 WHERE agr_name = wa_final-agr_name.
at this point also it's not holding the values when it exseds 255
kindly please helpH friends ,
i am not the expert at the same time i know some thing in abap
fval4 = fval3+0(250).
fval3 = fval3+250(5).
in the above case fval3 have 255 char at that time iam transporting 250 char to fval4 with this statment
fval4 = fval3+0(250).
and iam keeping the remaining 5 char in fval3 with this statment
fval3 = fval3+250(5)
so that i can push some more values in fval3 and at i am
CONCATENATE fval4 fval3 INTO fval5.
so that fval5 may get all values this is the way i try but fval5 is not holding all the values
i asked solution for that
fval 3 = fval3+250(250)
dosen't have any meaning i know that friend
my question is how to hold the remaining value -
Why does my image not reach the edges of the page when printed, but appears fine as pdf?
Why does my image not reach the edges of the page when printed, but appears fine as pdf?
Check a printable area of your printer.
Make a (grey) rectangle that is larger than the paper size. Print it,
you'll get a message that some cropping will occur, that's okay. Then take a
ruler and measure the dimensions of the rectangle printed on the paper or
the white borders around the printed rectangle. -
TS1398 Why does my iPad2 not display the WiFi icon?
Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.
Try the following:
1. Reset the AirPlay devices
2. Reboot the router
3. Reboot the iPad
Note: The AirPlay icon is now in the Control Center -
Why IPHOTO album will not keep the template format when share to IDVD.
Why IPHOTO album will not keep the template format when share to IDVD. Also, could be better if IPHOTO Album could access "inspector tool" with ability to change the slide duration time and apply a random "Transitions" to specific slide.
Are you sharing an album of photos or a slideshow to iDVD? If it's an album then what you get in iDVD is just a slideshow with the photos in it where you have to set the transition and slide timing unless you add music and select fit to audio.
Don't know what you mean by the template format unless you're referring to the themes in a slideshow? If you share a slideshow the ss is converted to a Quicktime movie file and that is added to the iDVD menu window. No changes are possible.
OT -
why my computer can not adjust the volume up and down althought i have had repair once time in a near day . i must waitting for 15days now it's continue
1. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Maybe you are looking for
-
White lines when zooming picture
How i can remove this lines? Because when im zooming in picture very closly they appear and i cant see pixels and its just confuse me.
-
What is the best edge to edge glass screen protector for iPhone 6
What is the best edge to edge glass screen protector for iPhone 6
-
Firefox doesn't display content, especially links.
This is my problem in a screenshot: http://d.pr/i/DjkB The content isn't displayed and especially links. Links are always not there and sometimes text is displayed but all websites are disfunctional because of this. Here's a link to a screenshot disp
-
Can we see performance score at reports column in OATS?
We've installed OATS and OAT Administrator to PC, and tried to do performance testing and show/read some score measurement at reports column, which will be generated by running 3rd party script. In OATS reports column, we can only see pie chart and b
-
Likelihood of having Keystroke Logger or other 'infection'
Today whilst in Safari I had an annoying pop-up that took two attempts to get rid of. Shortly afterwards the wifi base unit went down and had to be rebooted. Moments after rejoining the internet I had a message appear telling me another computer was