Why is my Mozilla Version 6.0.1 having problems with Bookmark Export and Import (html) ?

I have used this feature numerous times with no problems. Starting yesterday, when I export html bookmark file, I get a delay - and then the html file is extraordinarily large (16,400 KB versus 782 KB normal file size).
Also, when I attempt to import a saved html file, the new file will not save. Again, when I hit the "Export" or "Import"button, there is a prolonged delay.
Should I delete Mozilla and reinstall ?

Hi mrpetesix,
Thanks for the insight. I seem to have solved the problem and can now sync iCal with my phone's calander as I used to without using iCloud. I am running the same setup as you (iTunes 11.0.1, osx 10.6.8, iOS 6.0.1) so, if you want, I'm sure you can do this too (although it seems you now hae found a good solution yourself). Anyway, here it is for the archives:
When my phone was connected to iTunes, iTunes was showing that my Calander was being updated over the air by iCloud. It was not giving me any other options to choose which calanders to sync etc. So...
On your iPhone, go to settings>>iCloud and turn calandars OFF.
Now when you connect it to iTunes you can see all the old options under calandars and syncing between the two devices is back to 'normal'.
I don't know when this iCloud setting got switched on my phone (I didn't even know it existed before this episode), probably when I updated iOS/iTunes recently.
Hope that's useful to somebody. Cheers.

Similar Messages

  • HT201210 can I return to previous iOS version. have ios7 but having problems with music files since upgrading

    Is it safe to return to previous version of ios.  I have updated to iso7 but now having problems with music greying outl on my ipad

    Sorry, no Apple does not support downgrading

  • New version of Itunes is having problems with crossfading songs, it doesn´t work.  How do I fix that?

    I installed the new version of Itunes (10.5.2.11) and I have a party playlist in wich I need the songs to crossfade for the music to continue playing non-stop.  The problem is that even when the crossfade option is activated, it doesn´t crossfade songs.  And when it does, the last song played, keeds playing in backgroung from star, so you hear 2 songs at the same time.
    Also, I uninstalled the current version an installed an older version, but it won´t let me open the program, becouse "the iTunes Library was created in a newer vewrsion"
    HELP PLEASE!!!!
    Diego

    It seems that this is a MAJOR issue with MANY end users experiencing the exact same problem - iTunes 10.5.2.11 Crossfade is completely buggy.  Apple, get it together, seriously...your QA department should all be fired for this.
    Diego, there are numerous threads replicating your problem.
    So far, there are a few work arounds:
    https://discussions.apple.com/thread/3408812?start=0&tstart=0
    One thing to keep in mind, at least what has worked for me: After you make a change to the crossfade timing, you must close out of iTunes and re-open before the new settings take place.
    Crossfade timing = 12 seconds actually equates to about 50 seconds.
    Click the slider, then use your arrow key to tick over about 20 times - this should crossfade your songs approximately 6 seconds before ending.
    Apply, then close out and re-open iTunes...
    Peruse through the link above, there are different approaches.  Maybe one will work for you.
    <Edited by Host>

  • Why is Apple so bad at providing customers with information on what the problem with email is and what they are doing to fix it?

    Why is apple not providing information on what the problem withe email is and what they are doing to fix, along with a time frame for fixing the problem.

    It was because the problem was major.  If you do not know tech, you should know that a two day outage usually indicates some type of virus, hack, or a bad software load that they had to unravel.  The common way to solve that is to rebuild servers and put back into service.  That takes time.
    Apple did not want to admit this problem.  My guess at this stange was that they loaded new software that might be associated with the new IOS and it crashed.  To reveal this would be to cast into doubt their future revenue.
    Either way.  Run do not walk away from Icloud products and services.  Apple has demonstrated they can not be a business partner.

  • Is it possible to replace masters with versions without going through the process of exporting and importing?

    Is it possible to overwrite the master files with the versions without having to go through the entire process of exporting and importing back the images?
    Thnx in advance

    A small refinement if you shoot RAW. Remember, no RAW file can ever be edited or rewritten. Thus, in the old days, the flow was:
    RAW>TIFF/PSD and you ended up with two large files. (This is why some folks used to delete the RAW Masters.)
    With Aperture the flow is something like:
    RAW+Version(s) Only the Version is only 30 KB. (There is, of course, additional overhead of Thumbs and Previews, but, depending on your settings, this is only a fraction of the size of a TIFF or PSD.)
    You question goes right to the heart of the concept of a non-destructive workflow. With Aperture you always preserve your original Master file; the only things that are ever at risk are your edits (called Adjustments). Ironically, this is even more valuable if you shoot JPEG or TIFF as those files could be rewritten.)
    Aperture goes to great lengths to give you the best of both worlds; you always have the Master to revert to and your "edits" take up very little disk space. And you don't have to waste time trying to sync folders of RAW, TIFF, and JPEG. Similarly, you never have to worry about resizing images, changing color spaces, or any number of other things that get locked into an image file when you use a destructive workflow.
    Remember, Aperture will happily Export files in any format you may need. Export 'em, use 'em, delete 'em - your Masters are still safe in Aperture.
    DiploStrat

  • Ok.  I hope someone can answer my question.  I am new to photoshop.  I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - includi

    ok.  I hope someone can answer my question.  I am new to photoshop.  I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - including the adobe "instructions" seems to work.  How can i get this software in a downloadable format? is it actually free - I'm assuming it is...  Hope someone knows the answer to these questions...

    The download itself is free and is valid for 30 days only.  After that, the software ceases to work.
    CS4 is pretty old, no longer sold and no longer supported by Adobe.  It's also not compatible with many modern OSes.
    Why do you have to work with such an obsolete version of Photoshop?
    What kind of "designer" uses it?

  • Is anyone having problems with the latest version of iTunes?

    is anyone having problems with the latest version of ITunes?

    Dwayne3333 wrote:
    is anyone having problems with the latest version of ITunes?
    What a vague and useless question.
    A search of the forums would have revealed issues that others are having.
    Why does it matter though?  Are you having issues?  If not.. why would you care?

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    3-D is very memory intensive.
    System requirements | Photoshop
    Mac OS
    Multicore Intel processor with 64-bit support
    Mac OS X v10.7, v10.8, or v10.9
    2 GB of RAM (8 GB recommended)
    3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
    OpenGL 2.0–capable system
    Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
    ** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
    Bottom line, you don't have enough VRAM
    Nancy O.

  • I accidentally deleted Garageband on my MacBook Pro, version 10.6.8.  The new version of Garageband is only compatible with 10.9 and above.  Is it possible to still get the older version?  OR, can I get another copy of the startup CD  for my computer

    I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8.  The new version of GarageBand is only compatible with 10.9 and above.  Is it possible to still get the older version?  OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?

    The new version of GarageBand is only compatible with 10.9 and above.
    If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
    Is it possible to still get the older version?
    Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
    Have you checked your backups, if you can restore GarageBand from a backup?
    OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
    Sometimes the AppleStore Support will replace missing installer CDs for a fee.

  • HT4972 I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via  Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrad

    I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via  Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?

    try rebooting your computer.

  • Internal table export and import in ECC 5.0 version

    Hi friends,
    I am trying to export and import internal table from one program to other program.
    The below… export and import commands are not working when I run the program in background (using SUBMIT zxxxx via JOB name NUMBER number…..)
    EXPORT ITAB TO MEMORY id 'ZMATERIAL_CREATE'.
    IMPORT ItAB FROM MEMORY ID 'ZMATERIAL_CREATE'.
    Normally it should work. Since It’s not working I am trying with another alternative..
    i.e EXPORT (ptab) INTERNAL TABLE itab.
    My sap version is ECC 5.0….
    For your information, here I am forwarding sap help. Pls have a look and explain how to declare ptab internal table.
    +Extract from SAP help+
    In the dynamic case the parameter list is specified in an index table ptab with two columns. These columns can have any name and have to be of the type "character". In the first column of ptab, you have to specify the names of the parameters and in the second column the data objects. If the second column is initial, then the name of the parameter in the first column has to match the name of a data object. The data object is then stored under its name in the cluster. If the first column of ptab is initial, an uncatchable exception will be raised.
    Outside of classes you can also use a single-column internal table for parameter_list for the dynamic form. In doing so, all data objects are implicitly stored under their name in the data cluster.
    My internal table having around 45 columns.
    pls help me.
    Thanks in advance
    raghunath

    The export/import should work the way you are using it. Just make sure you are using same memory id and make sure its unique - meaning u are using it only for this itab purpose and not overwriting it with other values. Check itab is not initial before you export in program 1 - then import it in prog2 with same memory id...also check case, I am not sure if its case sensitive...
    Here is how you use the second variant...
    Two fields with two different identifications "P1" and "P2" with the dynamic variant of the cluster definition are written to the ABAP Memory. After execution of the statement IMPORT, the contents of the fields text1 and text2 are interchanged.
    TYPES:
      BEGIN OF tab_type,
        para TYPE string,
        dobj TYPE string,
      END OF tab_type.
    DATA:
      id    TYPE c LENGTH 10 VALUE 'TEXTS',
      text1 TYPE string VALUE `IKE`,
      text2 TYPE string VALUE `TINA`,
      line  TYPE tab_type,
      itab  TYPE STANDARD TABLE OF tab_type.
    line-para = 'P1'.
    line-dobj = 'TEXT1'.
    APPEND line TO itab.
    line-para = 'P2'.
    line-dobj = 'TEXT2'.
    APPEND line TO itab.
    EXPORT (itab)     TO MEMORY ID id.
    IMPORT p1 = text2
           p2 = text1 FROM MEMORY ID id.

  • Latest version of Firefox is having problems loading sites, it tries to load to Google Analytics. No error messages, just a page that won't load. How do I stop this?

    Latest version of Firefox is having problems loading some sites, it tries to load and then gets taken over trying to load Google Analytics. No error messages, just a page that won't load. How do I get rid of this, it is a "pain in the neck"
    == URL of affected sites ==
    http://

    I just spent 3 days with this issue as well. I finally fixed it by reluctantly adding yet another add-on called ADBLOCK
    I was able to selectively block google-analytics. Now pages that weren't loading before are now loading.
    eg vimeo.com starbucks.com & other random sites.
    This was a tough one to fix because there is NO ERROR MESSAGE..page just shows it's loading...forever..& the bottom of my browser says 'waiting for google analytics'. I finally figured out google analytics is the culprit. Ironically, some help pages in trying to find a fix wouldn't load for me due to google analytics arghhh!
    Im on a macbookpro & Safari worked fine for these same sites. It was just Firefox. I nearly switched back to Safari because of this stupid issue.
    I'm wondering if this was caused by recent firefox 'updates'...

  • Problems with bookmarks after update to version 16

    My bookmarks used to appear in the bookmark drop-down menu but now are only available in the bookmark sidebar. I have tried the reset to default option. I have tried deleting the places.sqlite file and the localstore.rdf file from the profile, but no change. Should I also try deleting the places.sqlite-shm and places.sqlite-wal files??
    How can I get my bookmarks back to where they were?
    Also, I am unable to export bookmarks to html -- goes through the motions, but no file is created.

    Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
    You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can try to check and repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Anyone know why my itunes says I need to re-install and that it's having problems with Microsoft Visual C

    Anyone know why my itunes says I need to re-install and that it's having problems with Microsoft Visual C++?

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562
    littlered1382 wrote:
      I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc.
    It has always been Prudent to Create and Maintain a Backup of anything you would not like to lose.

Maybe you are looking for