Why is my nook not getting recognized?

I just got a book from First to Read and I went to transfer it to my Nook. I can't get my nook to show on adobe digital. It's the newest edition. I have transferred books before so I am not sure what the issue is. I have restarted my computer and I have taken all the steps I could find with a google search.
Thanks so much for your help!
Jessie

Joyjester15 wrote:
I cannot find my scanner on either my HP laptop or HP Printer. Does anyoknow why?
Hi,
It may not have scan function at all. What is it ? Is this post a spam ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Why does my iPad2 not get recognized by my PC?

I tried to update to 4.3.2, downloaded it, started to install it on iPad2, now it is not recognized by my computer. WHY?

Was there any error codes when updating the iPhone?
Look into http://support.apple.com/kb/TS1275 for some specific error codes and resolutions.
You may need to put the iPad into Recovery Mode and then restore as new to get it detected on the computer and itunes. Look into http://support.apple.com/kb/HT4097

Third party audio apps not getting recognized

Why do most of my third party audio apps not get recognized by the "inter-app audio apps" feature in the new version of Garageband? I have version 3 of the IPad. It only recognizes Galileo (organ app) and not Sunrizer, Sample Tank, etc.

They are simply not enabled for that yet, maybe they will in the future; just find those who are. I think Audiobus, a 5 dollar app, can connect to more programs, and those too have to support it, but the supported program list is probably longer. Audiobus is very popular

My iPod Touch and iPhone 3G do not get recognized as a device by iTunes

Both, iPod Touch and iPhone 3G don't show up on my macbook and do not get recognized as a device by iTunes. I switched cables, restarted macbook (and the other devices) and did an iTunes update. Still nada, niente, rien, nichts and nothing... any guidance or help? appreciate it, thanks

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information topic near the bottom of the article.

Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes.

Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?

iPhone not appearing in iTunes

I have an ipod classic 120gb. Its not getting recognized by itunes.

I have an ipod classic 120gb. Its not getting recognized by itunes and i am unable to format it even though it says i must if i want it to appear on itunes. It does'nt work on any computer so its not the usb. ive reset it a few times but no luck. Any ideas?
Here is some of the info i got, im not sure however what they represent.
Retracts: 534
Reallocs: 216
Pending Sector: 62
PowerOn: 1253
Smart/Stop: 469
Temp:Current 27c
Temp:Min 5c
Temp:Max 56c

If Windows or Mac can recognise it, then reformat it using a Hardisk Partition tool, if not, it is time to replace the Hardisk.
The High Pending Number, indicates some bad cluster, which Hardisk firmware can't reallocate or remapped. This maybe due to, leaving the iPod in a Hot environment, damaging the Hardisk.

Item level pricing condition record is not getting recognized

Hi,
In our scenario we have to maintain the additional charges based on Plant. For this purpose I have created the condition table 900 which contains the following fields
Sales Org/Dist Chal/Divi./Plant
I have maintained the condition record for the table, Which has been downloaded to CRM successfully.
When I create the order in CRM price of the product is getting recognized where as additional charges condition records are not getting recognized.
When I check the Access I found that header level data .i.e. sales org/dist chal / divion has been recognized and plant has not been recognized that values are like this 00000000000000000000000000
I have checked the plant it has been downloaded successfully to CRM
So, can anybody help me out?
Thanks

Hi,
Check in the access sequnce exclusive indicator activation, it might be selected to the previous Condition Tables, if it is selected than system will not check further available/maintained condition reocrds.
Regards
Naren..

Why why why is my password not being recognized, i JUST changed it yet again

Why is my password not being recognized? I've used the same password, successfuly for the past year. All of a sudden, it tell me my password is incorrect. So I change it. Write it down. Still not recognized. What is going on here? Thanks for ANY help.

Have you restarted your phone since resetting your password? I know it seems so simple, but it's just like when you update a computer and have to restart. It doesn't hurt to try

Why is my iPhone5 not being recognized in Finder?

Why is my iPhone5 not being recognized in Finder?

There is no Finder access to an iOS device.
(79100)

I have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer

i have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer

Try this:
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors

I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, until the next time I need to use it and it does not get recognized again. Is there any fi

I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, starting the vicious cycle again: i need to use the password, it does not get recognized three times, then the system asks me to change it again, and again, and I am stuck!! Is there any fix for this "glitch?

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

IPod Nano 5th Gen Help: When I connect my iPod to my PC it seems to connect fine and show as normal until I load up itunes. Why is it suddenly not being recognized once my itunes is loaded?

Hello, I've been working at this for hours but have made little to no progress in fixing my issue.
So when I plug my ipod in via usb into my computer the autoplay starts and it connects as an iPod. I can see it when I open up "Computer" and everything seems to be running fine. I'm not getting any errors or anything.
However, the moment itunes starts up, whether it be manually started or starting automatically through the helper, my symbol for safely removing falls off of my screen and I can no longer see the ipod in "Computer". Though I may be able to see it in Printer and Devices.
I've already gone through several steps to try and fix it via support on this site. I've reinstalled itunes, I've gone into disk mode, I've reset the ipod, unplugged it and replugged it in. My last option is to restore to factory defaults. As much as I would love to do this to see if it works (as all my music is backed up on discs and my computer), I can't do so if it isn't showing in itunes due to the fact it can't detect the ipod or at least the kind of ipod. I've tried to find a 3rd party program that could do this but none of them offer the option. Note: The ipod itself works fine. I can listen to it and it'll charge just fine. It just won't recognize.
I'm running Windows 7 OS. iTunes is up-to-date.
If anyone knows how to fix it, the help would be greatly appreciated.

Hello BPeery,
I would go through ALL the steps here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Let us know how it goes.
Hope this helps.
~Julian

What are the possible reasons why this R3 info not getting to BW?

Hi,
I have data coming into BW from R3 a datasource DataSorce1; When it gets to BW, SalesOrg numbers 22941 and 22942 comes to BW without problem but 22943 which is a new config. In the R3 master data does not get to BW.
1. What are the possible ways to troubleshoot this?
2. How can I confirm that the data shows in R3: i.e. showing my SalesOrg 22941 and 22942 in R3, and also confirm that 22943 truly exists in R3.
3. How do I confirm that 22943 did not get to BW (if it exists in R3)?
4. What if this is some custom program bringing 22941 and 222942 to BW? How do I see the program name and track down why the third one is not getting to BW?
Please provide the necessary to tcode in all the discussions
Thanks

1. 1st thing... If there is no Sales againest Sales Organization. you won't see in Cubes if it is part of Transactional Data. <u>Load New Sales Organization Texts</u>.
1. If it is new Sales Organization as Navigation Attribute only(Assume for Sales Order), try activate your master data for Sales Order. check in your Sales Organizatio IO Master Data and Sales Order Master Data
2. If it is Part of Transactional Data, Check in your RSA3, PSA.
How to check in RSA3?: If you are usng 2LIS_11_VAHDR. goto se16, provide VBAK table, press enter. in the Select for Sales Organization. Put 22943. Provide Order type Standard Order. and Execute. Take any Order Number from output list.
Goto RSA3, provide your choosen sales order in the RSA3 selection in Sales Order field Execute it.
If you are able to find this Sales Order in Both RSA3 and PSA. You are getting Data for 22943 Sales Organization.
case 1: If you are able to see Choosen Sales Order in RSA3, not in PSA. check User Exit Code.
case 2 : If you are able to see Choosen Sales in PSA and Not in Targets. check all transformation.
Are you working with Standard DS(2LIS_11_) or Custom Datasource(Z)?
Nagesh Ganisetti.
Assign points if it helps.

IPod Nano does not get recognized as it should

Hi
I have got a problem that just popped up. The iPod itself works fine but I can not sync any longer.
When I plug in my iPod Nano it does not open iTunes anymore and when I open iTunes it does not appear. It get recognized in Windows Explorer as a new drive but without the iPod name and when clicking on the drive it says that the disk is not formatted and ask if I would like to format now.
I tried to changed drive from G to other as from one support page but without result
I have tried the 5 R´s but I am unable to restore the unit as the iPod updater freezes when I open it and it tries to look for the iPod.
My PC is with Windows 2000 and my iPod worked fine earlier.
I have tried to connect the iPod to other PC´s but with the same result -- the iPod says "do not disconnect" and nothing happens more than that the battery get charged.
I have tried to end the iPodservice.exe from the task manager but it fails saying "unable to terminate process, access is denied" This happend in all three PC´s
The unit shows up when clicking on the Safe Hardware removal icon in USB as "Apple iPod USB device" but when trying to stop the device it says that the unit can not be stopped now...
In my iPod I have checked and it is Format Windows
What to do now???

Ok I reply to myself if anyone intresetd in what happen in my case
I have now been able to do the restore my iPod Nano using the hints in one of the questions below. So now the iPod is recognized by Windows Explorer but now by iTunes. At least some progress.
What puzzles me ist that it seems that half teh world have teh same problem and Apples suggestion how to solve this does not work so where is Apple support?
No more fromme, I will read and try every thing I can until I just take a hammer and make the life of the iPod shorter than expected. There are many MP3 players on teh market that works...

Why h:commandlink action not get fired after upgrading to JSF-1.2_12?

Hi,
One strange behavior that I'm facing right now after upgrading to JSF version1.2_12, is that the action method for hidden commandlink which should get fired on changing the value of a comboBox are not getting fired. Note that I was initially using the JSF1.2_07 version and it worked fine.
Any help would be much appreciated.
Here is a sample code of what I have in my app.
<h:panelGroup>
               <h:selectOneMenu id="nav-menu" value="#{customBean.rowName}"
               onchange="submitOnMenuChange(this.form,'id-link', 'nav-menu');">
               <f:selectItem itemLabel="Select:" itemValue="" />
               <f:selectItem itemLabel="rowName1" itemValue="rowName1"/>
               <f:selectItem itemLabel="rowName2" itemValue="rowName2"/>
               </h:selectOneMenu>
               <h:commandLink id="id-link" value=" " action="#{customBean.updateAction}" style="display: none;"/>
</h:panelGroup>
Inside submitOnMenuChange() I'm using below technique to submit the form
var idclValue = formId + JSF_ID_SEPARATOR + elementId;
jsfcljs(document.forms[formId],idclValue+','+idclValue,'');
So, ideally on changing the value from above comboBox it should invoke the updateAction method, bit it doesn't.
Thanks,
Umesh
Edited by: Umesh_S on Oct 7, 2009 4:47 AM

Here is a small simple example which could help replicate the problem
There are mainly three files: 1. displayPage.jsp 2. CustomBean.java 3. faces-Config.xml
1. displayPage.jsp (content)
<%@ page session="true" contentType="text/html;charset=utf-8"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<f:view>
<html>
<head>
<script language="javascript">
function submitLinkAction(formId, elementId) {
     if (document.forms[formId] != null) {
          var idclValue = formId + ":" + elementId;
jsfcljs(document.forms[formId],idclValue+','+idclValue,'');
     } else {
          throw "Form with id [" + formId + "] is null.";
     return false;
function submitOnMenuChange(thisForm, linkId, menuId) {
     var fullMenuId = thisForm.id + ":" + menuId;
     var menu = document.forms[thisForm.id][fullMenuId];
     var selectedValue = menu.options[menu.selectedIndex].value;
     if (selectedValue.length > 0) {
          try {
               return submitLinkAction(thisForm.id, linkId);
          } catch (errorMsg) {
               alert("Error occurred: " + errorMsg);
     return false;
</script>
</head>
<body>
<h:form id="edit-form">
                         <h:panelGroup>
                              <%-- show select drop-down--%>
                                   <h:selectOneMenu id="nav-menu" value="#{customBean.rowName}"
                                        enabledClass="grid"
                                        onchange="submitOnMenuChange(this.form,'nav-link', 'nav-menu');">
                                        <f:selectItem itemLabel="Select:" itemValue="" />
                                        <f:selectItem itemLabel="Row1" itemValue="Row1"/>
                                        <f:selectItem itemLabel="Row2" itemValue="Row2"/>
                                   </h:selectOneMenu>
                                   <h:commandLink id="nav-link" value=" " action="#{customBean.updateAction}" style="display: none;"/>
                         </h:panelGroup>
</h:form>
</body>
</html>
</f:view>
2. CustomBean.java
public class CustomBean {
private String rowName;
     public CustomBean() {
     public String getRowName() {
          return this.rowName;
     public void setRowName(String value) {
          System.out.println("** Inside set row name**");
          this.rowName = value;
     public void updateAction() {
          System.out.println("************This is action method for hidden command link************* ");
3. faces-config.xml (content)
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config xmlns="http://java.sun.com/JSF/Configuration">
     <managed-bean>
     <managed-bean-name>customBean</managed-bean-name>
     <managed-bean-class>com.examples.CustomBean</managed-bean-class>
     <managed-bean-scope>request</managed-bean-scope>
     </managed-bean>
</faces-config>
So, if we run above example on JSF 1.2_07, on changing the value of nav-menu, it should submit the form and the action method (updateAction()) defined for commandlink "nav-link" should get fired (one could see the System.out coming on the console) but the moment the JSF jars are upgraded to 1.2_12 the action method no more gets invoked.
Thanks,
Umesh

Why is my nook not getting recognized?

Similar Messages

Maybe you are looking for