Why is my Scanner not functioning?

Hello,
I have an HP 4600 scanner. Is there a way to update the scanner drivers via Software Update in Apple? It works fine with Photoshop CS2 but does not work in Photoshop CS3.

Joyjester15 wrote:
I cannot find my scanner on either my HP laptop or HP Printer.  Does anyoknow why?
Hi,
It may not have scan function at all. What is it ? Is this post a spam ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • My printer is out of Black Ink .... why does my Scanner Not Work anymore?

    My printer is out of Black Ink .... why does my Scanner Not Work anymore?

    Hello Londen.
    The community is eager to assist! To ensure the most accurate information is provided, we’ll need to know the model of the printer you are using. We look forward to hearing back from you!

  • Why does my scanner not work with Yosemite

    My father upgraded to Yosemite but now can't get his scanner to work with it.  How can I advise him?

    I have talked at length to Canon. Their support is normally very responsible and competent, but in this case, they say that they don't know if or when there will be a fix to the problem. All they suggest is that you download the drivers and reinstall them. They also suggest that you repair your disk permissions.
    The problem is that after the first scan, the software tries to locate the scanner. After 90 seconds, there is a message saying that the scanner is in use by another application. Once you reply OK to that message, you can scan another document. So, it works, if you consider scanning a document every 90 seconds working. I don't.
    The problem may well be Apple's, but resolution requires that Canon and Apple talk. They don't seem to be.

  • Why is the 'click' not functioning properly in firefox 29.0.1 which was totally fine till firefox 28?I'm using Jquery Triggers for my actions to get trapped.

    I'm sure the bind has been done so that the click() gets recognized by the trigger.Is this some kind of Compatibility issue with Jquery?

    HI nivesh.naramsetti,
    Please update to the new firefox version 30 to test the compatibility. If it still gives you issues please check out [webcompat.com]

  • Rpt-files do not function anymore after deploying to a different database

    first: I use CR. 10.2.3600.0 and Asp.NET with Visual Studio 2005
    I developed my reports against a Develepment-Database and everything worked fine.
    Then, I published my Website with the reports.
    Also I made a backup of my Develepment-Database to become the Productive-Database.
    All pages of my website function well (database-queries etc.), but when I try to call one of my reports a queerish error message occurs:
    "This field name is not known. Error in File C:\WINDOWS\TEMP\...\{...}.rpt: Error in formula. '{xyz.ds_id} = {?@ds_id} and '."
    I mean, the database is the "same" as before?!?
    (BTW: the logon to the database is set at runtime and is ok.)
    Why do the reports not function anymore?
    The only workaround I found is to open the report in Visual Studio 2005 again and select  "Crystal Reports/Databases/Check Database" against the Productive-Database.
    After that the report works! BUT THIS COULD NOT BE THE SOLUTION, this means that I cannot publish my website to a different database on a customers network!!!

    I tried this:
    Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
            Dim myTables As Tables = myReportDocument.Database.Tables
            ' Get Location of Database from web.config
            Dim Location As String = String.Empty
            Try
                For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                    Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                    myTableLogonInfo.ConnectionInfo = myConnectionInfo
                    myTable.Location = myConnectionInfo.DatabaseName & ".dbo." & myTable.Location.Substring(myTable.Location.LastIndexOf(".") + 1)
                    myTable.ApplyLogOnInfo(myTableLogonInfo)
                Next
            Catch ex As Exception
                Me.LabelError.Text = "(SetDBLogonForReport) " + ex.Message
            End Try
        End Sub
    and get the error:
    ex.Message     "Fehler beim Laden der Datenbankinformationen.
    Details: Die Datenbank-DLL 'crdb_query.dll' konnte nicht geladen werden.
    Fehler in der Datei C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
    Fehler beim Laden der Datenbankinformationen"
    which means in english:
    ex.Message     "Error while loading database information.
    Details: the databse-dll 'crdb_query.dll' could not be loaded.
    Error in file C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
    Error while loading database information"
    I debugged the code and recognized that the error appears while setting the .Location property...?!?
    My DatabaseName is "Rezepturverwaltung".
    Example 1 with a command:
    Befor setting the Location of mytable the value of the prpperty is e.g. "command".
    After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.command"
    Example 2 with a stored procedure:
    Befor setting the Location of mytable the value of the prpperty is e.g. "sp_GetData".
    After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.sp_GetData"
    What`s going wrong furthermore???
    Edited by: Markus Schfer on Aug 31, 2009 9:56 AM

  • Privileges granted to roles sometimes are not effective(not functioning)?

    Hello,
    I have experienced where roles where granted and privileges granted to the roles. The roles are they granted to certain users. But when these users try to perform dml/ddl, they get insufficient priviledges even though these users were granted the roles which do contain the correct priviledges. Why are some priviledges not functioning when they are granted to the roles? To resolve, direct grants were granted to the users. But why aren't they working through the roles? Thank you.

    Hi watson2000 ,
    can you send the scripts...what you have performed.
    Since, I did not faced any problem with granting privliges and roles.
    If you provide some information on that (little more) whjat you have done so that we can help you out..
    Thanks
    Pavan Kumar N

  • PhotoSmart C309a wireless radio is not functioning. Does anyone know why that my be?

    My printer used to work using my wireless network.  It failed to print and a diagnostic told me the wireless radio was not working.  Does anyone know why?

    Hello,
    "Wireless Radio Not functioning" usually indicates an issue with the wireless card in the Printer.
    Please try below steps ..
    While the Printer is ON, unplug the Power Cord from back of the Printer.
    Wait for 30 seconds and then Plug in the Power Cord to the printer.
    While the printer is displaying the home screen,.
    Select Setup > Network > Wireless Radio : ON
    on Printer display, Select Setup > Network > Print Network Configuration . Check if the printed diagnostic pages still displays " Wireless Radio Not Functioning" ? if Yes, Your Printer requires a SERVICE, hence  Please call HP Support ( US ) 1-800-474-6836 .
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized?

    Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ?  I have the same printer/scanner/fax at work and I couldn't get it to scan either.  They just keep saying No scanners were detected. 
    And it tells me on the scanner to do it from the computer!!  Ugh!!!!!  I need it done yesterday!  This ePrint has been very disappointing.  Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up!  What good is having wireless if I have to go to it?  I might as well plug in!   Waste of money and can't afford to buy a different one   But any answers would be greatly appreciated.
    OS- Windows 7 64-bit 

    jewlz0001 wrote:
    Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ?  I have the same printer/scanner/fax at work and I couldn't get it to scan either.  They just keep saying No scanners were detected. 
    And it tells me on the scanner to do it from the computer!!  Ugh!!!!!  I need it done yesterday!  This ePrint has been very disappointing.  Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up!  What good is having wireless if I have to go to it?  I might as well plug in!   Waste of money and can't afford to buy a different one   But any answers would be greatly appreciated.
    OS- Windows 7 64-bit 

  • Code Hints - not functioning. Why not?

    Code Hints in Dreamweaver CS4 were functioning fine until this morning. Now they don't appear to work.
    I've checked for syntax errors, but Code Hints will not function on any existing page or in a new document.
    I'm presuming that I've disabled them somehow but cannot find how or where.
    Code Hints are enabled via Preferences (Close tags after "</" & delay 0 seconds)
    The menu only gives options for Spry and DOM Code Hints.
    Any ideas as to why it's not functioning. I notice a number of posts where the same question has been raised but am yet to read a reply.
    All hints welcome...

    Easiest solution?
    Uninstall and reinstall Dreamweaver.
    Sorted in 20 minutes. Even better, Dreamweaver 'remembers' all site login/ftp data, passwords, etc, so no concerns there.

  • Why some Vi in LabVIEW Functions panel are not in PDA Functions panel?

    why some Vi in LabVIEW Functions panel are not in PDA Functions panel?
    such as "MT Generate System Parameters.vi".......can not run on the PDA window and say:"MT Generate System Parameters.vi":subVI is not executable. 

    mathan wrote:
    WenBin wrote:
    up
    could you please explain in bit more detail
    Looks like a lame attempt to "bump" the thread.
    Adding a (nearly) empty message places the thread back on top of the list, in the false assumption that this would generate more replies.
    Well, he's partially correct, because it added the last three posts (which of course have nothing to do with the problem at hand), but it did not increase the "real" answers.
    Bumping a thread is disruptive and generally a bad idea, because it adds a lot of noise to the forum. Imagine everybody would do it! There would be so much elbowing for the top spot that all substance would be lost in the chatter.
    In the NI forums, bumping a thread is very counterproductive, because blue contributions (from NI) will typically (and hopefully!) wait until the thread is idle for a while.
    Overall, it is a bad idea!
    LabVIEW Champion . Do more with less code and in less time .

  • Why is my touch screen function not working when using facetime

    Why is my touch screen function not working when using facetime

    Hello megascones,
    After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Restart your device. If you can't restart, reset your device.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I purchused a Mac 10.9.4. The screen saver is not functioning, any idea why?

    I purchased a Mac 10.9.4. The screen saver is not functioning, any idea why? Thanks.

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Best.

  • I've recently downloaded Lion and find my Microsoft excel, word, entourage and powerpoint do not function. It says these functions are not now supported. Why and how do I get to use them again?

    I've recently downloaded Lion and find my Microsoft excel, word, entourage and powerpoint do not function. It says these functions are not now supported. Why and how do I get to use them again?

    philippnoe wrote:
    What a "great" Program which is supporting many nice but not mandatory things but is not supporting a Program which is used day by day from many users ... and especially this Program is also sold officially by apple !!!
    Yeah!, Why, Lion won't even run my old DOS programs! 

  • Why Segment shrink is not supported for tables with function-based indexes

    As we all know , Segment shrink is not supported for tables with function-based indexes.
    But i'm very confused .
    Why Segment shrink is not supported for tables with function-based indexes ?? what's its essential?

    Creating a function based index creates a hidden virtual column (you'll see it if you query user_tab_cols) and once you index a virtual column you can no longer shrink the table:orcl> create table t1(c1 number,c2 as (c1 * 2)) segment creation immediate;
    Table created.
    orcl> alter table t1 enable row movement;
    Table altered.
    orcl>
    orcl> alter table t1 shrink space;
    Table altered.
    orcl> create index i2 on t1(c2);
    Index created.
    orcl> alter table t1 shrink space;
    alter table t1 shrink space
    ERROR at line 1:
    ORA-10631: SHRINK clause should not be specified for this object
    orcl>so the issue is not with function based indexes per se, it is a level beneath that. Perhaps because the virtual column has no physical existance, when the row is moved there is no reason for Oracle to realize that an index needs updating? I haven't attempted to reverse engineer this, I would be interested to know if anyone else has.

  • I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    MAJOR DEFICIENCY = WASTED MONEY:
    I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

Maybe you are looking for