Why is output creating as *.GIF?

Using CS4 (version 11) on a PC.
I have an image I sliced up (it's actually a template a client bought) which is custom CSS output saving as HTML + Images. For some reason all of the image files except one are outputted as gif files. I want them to be jpg files so is there a way to change it? I put JPG as the out put type but it doesn't seem to matter.
Thanks for your assistance!

That will depend on the structure of the individual images. Can you use PNG? That is my choice for continuous tone images that have any sort of Transparency. I am just not a GIF fan, but do not do a lot of Web work.
Maybe post a screen-cap of that image w/ the Layers Palette open, and someone can give you exact pointers.
Good luck,
Hunt

Similar Messages

Creating a Gif is different frame rate

If I have an uncompressed .AVI file that I created in After Effects CS5.5 which is 23.976 fps, and load it in Adobe Media Encoder CS5.5, and tell it to create a .GIF of it, at an output fps of 23.976, when I load the created .GIF into Adobe After Effects it tells me the frame rate is 25 fps and there is a black frame padded on the end. I want the frame rate of the GIF to be what I ask it to be, ie. 23.976, with no additional black frames.
Here's what happened with screenshots:
1. I load the uncompressed AVI file that was created in Adobe After Effects CS5.5 into Adobe Media Encoder CS5.5. Note below that Adobe Media Encoder is saying that the source clip is 23.976 fps, and that the export settings are to create an animated GIF at 23.976 fps.
2. After Adobe Media Encoder CS5.5 has said "done" (Encoding Completed Succesfully) for this export to a .GIF, if I take that .GIF file that Adobe Media Encoder has just created into Adobe After Effects CS5.5, this is what it says:
As can be seen above, Adobe After Effects CS5.5 is saying the GIF file that Adobe Media Encoder CS5.5 has just encoded is actually 25 fps, not 23.976 fps like I told it to be exported as. Also, the GIF Adobe Media Encoder has created is 10 frames long, whereas my original uncompressed AVI is 9 frames long.
Edit: I've just been reading up on the GIF format and it seems it doesn't store a frame rate but instead stores a frame delay, which is in hundredths of a second. If this is just an integer, is this the reason for the displayed frame rate discrepancy, ie. 1 frame at 23.976 fps would be 4.1708 hundredths of a second I think, and 1 frame at 25 fps would be 4 hundredths of a second I think - both rounded to the nearest integer would be 4 hundredths of a second so would the frame delay be set to "4" for both 23.976 fps and 25 fps? (there is also the fact that some short time will be taken for the drawing of the frame)
Though even with the above, it shouldn't be increasing the amount of output frames. It converts it correctly (no additional frames) if I use VirtualDub to convert the AVI to GIF instead of Adobe Media Encoder CS5.5.

Thanks. Could you get them to also check other parts of the code too. eg. when I had a work area set in Adobe After Effects CS5.5 and then loaded that project into Adobe Media Encoder (dynamic link etc.) and rendered just the work area I think it was about a frame out then too - I don't think it was a GIF in that case but another type (maybe AVI/H264).

Creating a gif Title for a Web Page

http://www.coachinginroads.com/dev/public_html/index3.html
I am trying to create a slide show where the image changes behind the title "Coaching Inroads." The title needs to stay stationary, which is why I thought a transparent gif would work. The embedded image that appears in the center of image is the look I want, but am unable to create that same look in PS, as the sample that is off-center shows. The drop shadow seems to be the problem.
I had made the title in AI & imported it - w/ drop shadow - into PS. Is there a better way to do this? Or what am I missing in the Save for Web dialog in PS?
Thanks, -BArry

Save as PNG-24, not GIF.

Creating Animated Gifs in Illustrator?

In PS if you have a layered file, you can create an animated gif via SAVE FOR WEB AND DEVICES.
But it seems you can only create static gifs via SAVE FOR WEB AND DEVICES in Illustrator from layered files.
Please! Say that ain't so - that I'm missing some small detail that will allow me to do this same thing from Illustrator!!!!
Many thanks in advance!

Thanks so much Scott,
You break my heart! ;(
Going via PS is tons of extra work. Uneccessary work! What happens is that for some strange reason, the layers come into PS weird. the icon for EACH layer is a folder AND a subfolder. So they have be flattened one by one and THEN turned into frames in the animation layer AND THEN saved as a gif. So what's perplexing me - is seeing the same SAVE FOR WEB AND DEVICE dialog box in Illustratore - yet it only saves static gifs.
Is it really true that i have to go through all these extra steps? Yikes! I wonder why Adobe would do that, and yet go through all the trouble to let you export swf's. It seems so very poorly planned by Adobe that i keep hoping someone will tell me I'm missing something - and that there's a way to do this from Illustrator.
But thank you so much for your help. I really do appreciate it.

Why do we create logical systems in ALE?

Hi All,
i got this question in interview.
Why do we create logical systems in ALE?
Thanks & Regards
suresh

Hi
In addition to above .
A logical system is used to identify an individual client in a system, for ALE communication between SAP systems. That's why you see a field for 'logical system' in the client master data in SCC4 (table T000).
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
http://help.sap.com/saphelp_nw04/helpdata/en/b5/1d733b73a8f706e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24ca94ba111d189750000e8322d00/content.htm
http://72.14.203.104/search?q=cache:J-uDLyT0w54J:www.topxml.com/biztalkutilities/walkthroughs/SAP%2520Configuration.pdfwhatislogicalsystems+(SAP)&hl=en&gl=in&ct=clnk&cd=5
http://help.sap.com/saphelp_nw04/helpdata/en/78/217dc151ce11d189570000e829fbbd/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d7/9c73631d6c11d2a56e0060087832f8/content.htm
This guide is really good shows step by step procedure.
http://72.14.203.104/search?q=cache:Xyl0zxpyEXsJ:www.sappoint.com/abap/ale.pdfLogicalsystem(ALE)&hl=en&gl=in&ct=clnk&cd=9
for one client config
http://www.sappro.com/downloads/OneClientDistribution.pdf#search=%22Logical%20system(ALE)%22
Please reward for the same.

HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al

Create animated gif s?

Is there any such thing to create an animated gif? Something like a javax.imageio.ImageWriter implementation?
It should be a simple routine for putting some 3 to 5 Images together and publish them...
Thanks in advance,
Sebastian

Gif4J Library (http://www.gif4j.com) is the best solution to create animated gifs. Supports ImageIO and much more.

Creating a .gif file in QT Pro?!?!

can someone help me out or even let me know if this is possible

What you want to do (create a .gif using QT Pro) can't be done. QuickTime can open .gif files (even preserve transparency) but the saved file will be .mov.
You can create an Image Sequence movie that will resemble the features on an animated .gif file, however.
Create your still images (sized identically) and save them to a new folder using sequencial naming (1.jpg, 2.jpg, 3.jpg, etc.). They can be any format that QT understands.
Select Open Image Sequence, navigate to this new folder and highlight (single-click) the first file in the list. Click OK and select a "frame rate" for the new file.
QuickTime will assemble your files into one .mov file.
Graphic Converter can now do some work with .mov files and may even be able to export your image sequence. .gif is 8 bit (256 colors) so if you wish to use the .gif format you will lose a lot of data if your original QT import were in any format other than .gif.
Try this freeware to start and end in .gif format:
http://www.apple.com/downloads/macosx/imaging_3d/gifbuilder.html

Creating a GIF using CS3

I am trying to create a GIF using CS3. I have read the discussions on Adobe but I get to a stage in the instructions and it is not working for me. I have 6 jpeg photos, and i bring them all into one. All photos are named different. After reading the forums, the next step is FILE>SAVEAS. Next, you select COMPUSERVE.gif. Once I select that, I have no idea where to go. It would be much appreciated if someone could help me out. Thanks
PS Sorry about the picture quality.

Here are some basic steps, but i would go Image>Image Size and reduce the size (pixel dimensions) of your document first.
http://www.megandowntherabbithole.com/2012/10/how-to-create-an-animated-gif-in-adobe-photo shop-cs3-tutorial/

Creating a gif that is a progression of filter effects

I want to take a single image and create a gif from it that is a sequence of frames with a particular Photoshop filter effect going from a maximum to zero effect. Lets take for example a Gaussian filter. The initial frame would have a heavy Gaussian filter applied and the last frame would have no filter applied. I want the effect to take maybe a second or two with 10 to 20 frames per second.
I don't imagine this will be trivial or easy... that's not my question. My question is if anyone has suggestions on how to optimize the work flow in creating this effect.
I'm a programmer and I've done photoshop javascript programs in the distant distant past if that might help but I'm not sure if this project requires that level of effort.
Thank you for your time,
pedzsan

Yes. This is much easier than I expected. The wonders of progress.
There are two ways to do it. Your method is more general purpose and more accurately accomplishes my original objective. Another method is to make one duplicate layer and apply the filter to it. Then create a video timeline and change the opacity of that layer from 100% at the beginning of the time period to 0% at the end of the time period (two "key frames" ?). Then export the gif.
Thank you for your reply,
pedzan

Why do we create multiple aliases to a single table?

<h4>{color:#0000ff}Hi,{color}</h4>
<h4></h4>
<h4></h4>
<h4>{color:#0000ff} Why do we create multiple aliases to a single table in the same query?{color}</h4>
<h4></h4>
<h4></h4>
<h4>{color:#0000ff}{color:#000000}For Ex: {color}{color}</h4>
<h4>
{color:#000000}select name,address,phone, from emp e, emp e1{color}</h4>
<h4></h4>
<h4>{color:#000000}where e.empid = e1.empid;{color}</h4>
<h4>
{color:#0000ff}ofcourse the above query's where condition is not correct, but i am giving as an example only{color}</h4>
<h4>{color:#0000ff}I have seen similar kind of queries where a single table name is aliased 10 times in the same query{color}</h4>
<h4>{color:#0000ff}can someone help me to understand the logic behind it?{color}</h4>
<h4>{color:#0000ff}Thanks in advance{color}</h4>
<h4>{color:#0000ff}greddy.{color}</h4>
Edited by: greddy on Oct 24, 2008 2:46 AM

Hi,
When you say
FROM    emp e
,       emp e1you are using two copies of the same table.
Can you imagine using two copies of the same book at the same time?
Say you see a word (like "hyrax") that you don't know. You might look up that word in the dictionary.
The English sentence "Open the dictionary to the page containing the new word." is like this SQL query:
FROM    dictionary
WHERE   :unknown_word BETWEEN low_guide_word and high_guide_wordWhat if you saw that word while reading a book (let's call it book_a).
You might want to leave book_a open, and place the dictionary beside book_a, so you can easily compare how the word is used in book_a with the definition in the dictionary.
This corresponds to joining two tables in SQL:
FROM    book_a
JOIN    dictionary ON unknown_word BETWEEN low_guide_word AND high_guide_word
WHERE   book_a.page = whatever -- NOTE: both tables have a column called pageor you can use aliases for one or both of the tables
FROM    book_a      a
JOIN    dictionary d ON a.unknown_word BETWEEN d.low_guide_word AND d.high_guide_word
WHERE   a.page = whatever -- NOTE: both tables have a column called pageNow, imagine that book_a is itself the dictionary. Say you saw the word "hyrax" while you were looking up another word, "ibex".
You can do a side-by-side comparison, as above, if you have two copies of the dictionary. Leave one copy open to "ibex", and open the other copy to "hyrax".
This corresponds to a self-join in SQL:
FROM    dictionary a
JOIN    dictionary d ON a.unknown_word BETWEEN d.low_guide_word AND d.high_guide_word
WHERE   a.page = whatever -- NOTE: both tables have a column called pageNotice that this last bit of code is identical to the previous one, except that book_a is replaced with dictionary.
In this case, you must you a table alias, at least for one copy. It wouldn't make any sense to say "Leave the dictionary open to "ibex" and open the dictionary to "hyrax". You have to have some unique way of referring to each copy, such as "Leave the dictionary on my left open to "ibex" and open the dictionary on my right to "hyrax"."

Why do we create indexes for DSOs and Cubes.What is the use of it?

Hi All,
Can you please tell me why are indexes created for DSOs and Cubes.
What is the use with the creation of indexes.
Thanks,
Sravani

HI ,
An index is a copy of a database table that is reduced to certain fields. This copy is always in sorted form. Sorting provides faster access to the data records of the table, for example, when using a binary search. A table has a primary index and a secondary index. The primary index consists of the key fields of the table and is automatically created in the database along with the table. You can also create further indexes on a table in the Java Dictionary. These are called secondary indexes. This is necessary if the table is frequently accessed in a way that does not take advantage of the primary index. Different indexes for the same table are distinguished from one another by a separate index name. The index name must be unique. Whether or not an index is used to access a particular table, is decided by the database system optimizer. This means that an index might improve performance only with certain database systems. You specify if the index should be used on certain database systems in the index definition. Indexes for a table are created when the table is created (provided that the table is not excluded for the database system in the index definition). If the index fields represent the primary keys of the table, that is, if they already uniquely identify each record of the table, the index is referred to as an unique index.
they are created on DSO and cube for the performance purpose ..and reports created on them wil be also more efficent ..
Regards,
shikha

Why do we create Sample Account

Hi,
I am practicing creating GL account. Somewhere in the documentation it talks about creating Sample Accounts.
Why do we create Sample Accounts?
How is it used in real life scenarios?

Hello,
Creating a Sample A/C is <b>Optional</b>.
It contains <b>data which will be transferred </b>when you have created a master record in the Co. Code.
Sample A/c are created when installing the syatem & assigned to the corresponding G/L A/C master record in Chart of Account.
Regards,
Asmieeta.
<i>Assign Pts if useful</i>

Why not to create a pause in the video camera?

Mr/Mrs
During recording a video, When we want to stop recording for a while and then continue, we have to record a new video again but we cannot do pause because there is no a pause function. So my suggestions is "Why not to create a pause in the video camera?"
Sincerely i ask you look into my this suggestion please. It would be great if you create this function into the new version of iOS.
By the way if you will have news about it please inform to me. [email protected]
Sincerely your best Apple user Ilkhom
Thanks

Refer:
http://www.sap-img.com/abap/sending-mail-with-attachment-report-in-background.htm
http://www.saptechies.com/sending-mail-with-attachment-report-in-background/

Why should we create data type

Hi all,
I have a basic question!
why do we create data type and then wrap it as message type?
why dont we directly create a message type and use that ?
please give the answers. Thanks in Advance.

Hi Seshu,
Please go through below links, you get answer
message type and datatype
Difference between Data type and Message type - Process Integration - SCN Wiki
Regards,
Krupa

Why is output creating as *.GIF?

Similar Messages

Maybe you are looking for