Why is the image cropped in landscape mode

Hi - I made video from a collation of youtube clips and transcoded it to iPad default settings in FCPX but when I view it on iPad the image along with the subtitles are cropped in landscape mode, why is that when the transcode settings list iPad 3 as included. How, or what do I need to do to fix this problem please.

The iPad display is 2048x1536 pixels which is 4x3 aspect ratio. When you display a 1280x720 video which is 16x9 aspect ratio you will get bars at top and bottom of the iPad screen. Any attempt to fill the screen by scaling etc will cause you to lose part of the frame edges. You have not stated what your project properties were in FCP. If they were 1920x1080 or 1280x720 then you might try an SD project ie 4x3 and see what sharing does for that. I haven't tried it but I suspect it will be 4x3 and fill your iPad screen. The issue may be the aspect ratio of your youtube clips. If they are wide screen which I suspect then you would see the bars in FCP storyline and your are back to the same issue when you export. You could in this case use the transform tools etc in FCP to fill the screen and pan the clips to not lose subtitles. It's a fiddling process. Hope this clarifies a bit.

Similar Messages

  • Why is the image cropped?

    Perhaps I haven't noticed this before...
    Because of emminent system failure, I purchased a new PC with Windows7 (upgrade (?) from Windows XP) and then upgraded Photoshop to CS5 from CS3.  However, I notice that when I rotate a "landscape image" and make it a "portrait", I find that the image appears to be cropped automatically, rather than retain the aspect ratio of the "lanscape image"; it appears that the former height in the landscape, becomes the new height in the portrait .  I think it has something to do with the aspect ratio, as manipulating this seems to alleviate the symptom somewhat. It also appears to be present in the other image viewers that are not Adobe.  Can anyone explain this and direct me to information on how to correct this problem?

    Pro_gra_b wrote:
    ...when I rotate a "landscape image" and make it a "portrait"...
    How are you doing this, exactly?
    You need to rotate your entire image document.
    Try this:  Choose Image - Image Rotation - 90 Degrees Counterclockwise (or the appropriate choice).  What do you see?
    -Noel

  • Is there a way to hide the bookmarks bar in iOS 8 on the iPad? It takes up a large part of the screen when in landscape mode

    Since I upgraded to iOS8, my iPad screen permanently shows the bookmarks bar down the left. This means I can only use about ⅔ of the screen when in landscape mode. Is there something I am missing which allows me to hide/show the bookmarks bar? Thanks

    TThank you so much! I felt it must be something straightforward.

  • Iphone 6 when held in landscape will not open text messages in landscape. Phone needs to be held upright and then back to landscape. The phone sits in landscape mode on a dock.

    IPhone 6 when held in landscape will not open text messages in landscape. Phone needs to be held upright and then back to landscape. The phone sits in landscape mode on a dock.

    have the same issue even after upgrading to 8.1

  • Why is the Image in Canvas Square?

    I have about a dozen video clips in my Sequence - they are all DV/DVCPRO - NTSC, 720x480. The sequence settings are 720x480 NTSC DV (3:2), Pixel Aspect Ratio NTSC - CCIR 601 - DV 720/480 and the Compressor DV/DVCPRO - NTSC.
    Question: Why is the image in the Canvas square?
    Thanks in advance for any help.
    Brian

    it looks stretched taller.
    I think you have Anamorphic material.
    Start a new Sequence. Go to Sequence > Settings and click the Anamorphic checkbox.
    Select a clip in the Browser. Press command and 9. Find Anamorphic in the column on the left.
    Click next to it in the Clip column to place a check mark there too.
    Edit into the timeline.
    Does that look better?

  • Why is the image in iMovie reversed?

    Why is the image in iMovie reversed? My right hand shows as the left hand and what should be over my right shoulder shows as being over my left. I cannot find any info regarding this. When I open iChat the image is oriented correctly.

    it looks stretched taller.
    I think you have Anamorphic material.
    Start a new Sequence. Go to Sequence > Settings and click the Anamorphic checkbox.
    Select a clip in the Browser. Press command and 9. Find Anamorphic in the column on the left.
    Click next to it in the Clip column to place a check mark there too.
    Edit into the timeline.
    Does that look better?

  • The iPhone 5 in landscape mode is a tablet for the Fluid Grid layout

    Hi all,
    I created a "fluid" layout for a site and realized that the iPhone 5, in landscape mode, is > 480 pixels, so the "tablet" layout is applied.
    Have you encountered this issue as well? How to solve it? I thought I might modify the CSS media query and define the tablet as > 536 but maybe some-one has a more elegant solution?
    And, in general, when is a phone really a tablet?
    Bootstrap from Twitter suggests four types of widths.
    /* Large desktop */
    @media (min-width: 1200px) { ... }
    /* Portrait tablet to landscape and desktop */
    @media (min-width: 768px) and (max-width: 979px) { ... }
    /* Landscape phone to portrait tablet */
    @media (max-width: 767px) { ... }
    /* Landscape phones and down */
    @media (max-width: 480px) { ... }
    In this framework (which is very similar to DW's fluid grid: it has a class called "clearfix" which suggests me something), under 768 it's still a phone... Is IT? What do you think?

    Smartphones are getting bigger.  Tablets are getting smaller.  So there's bound to be some overlap between devices.  I just don't see this as a problem.   Nor should you.
    Nancy O.

  • Iphone 4s with upgrade to ios 6, why are the images I save "save photo" not in my camera roll?

    I have an iphone 4s upgraded with ios 6. Why are the images I save "save photo" not in my camera roll? Where do they go?
    Thx,
    surfin steve

    Hey, I just had this problem, I went into Settings -> Privacy-> Facebook (which is where I was saving photos from) -> turned it on, then back to settings -> Facebook-> and logged in. When I went back to Facebook and saved a photo and it saved to my camera roll. I haven't tried it with anything else yet though. Hope this helps!

  • Why is the image not as sharp in library mode then it is in develop mode?

    and the image i email reflects the library image/version (less sharp) not the develop mode image/version.

    I just open my MBP before plugging up the TB display.  Then after the TB comes on, I close the MBP back into clamshell mode.  Works better for me that way. 
    Does that work for you as well?
    -Brad

  • IPhone 6: Where's the status bar in landscape mode?

    I just got the iPhone 6 (I believe iOS 8.1) and my only problem is that it removes the status bar in when in landscape mode. I find it extremely annoying that I can no longer see the time, monitor my battery life, check whether if I'm even receiving a signal, etc. when I'm using apps such as Safari or Notes in landscape mode. Is there any way to get the status bar back like in previous software versions? So far, I hate having to switch to portrait mode, using the pull down menu, or pressing the home button just to see it...

    Same here - I returned my original, same problem on the second one, and same problem on my son's phone. I called Apple tech months ago, got to a senior supervisor who assured me he'd get back to me, but never did.

  • Why is the image moving when I print on 300gsm card, but is fine on 160gsm paper?

    Hello,
    I am printing a double sided invitation for a customer. I am not sure what it was originally set in as I have only been given the pdf up to now. The invite has a thin black line around the writing.
    I am trying to put a proof together so they can see it on the colour they've chosen, when I cut it out (using their crop marks) on 160gsm everything lines up nicely, however, when I cut it out from 300gsm I end up cutting either the top or the bottom off as the image has moved. I am sure this is down to the weight of the card but how do I (or the customer) counteract this and what is the term for the issue? (If there is one)
    Thanks
    Louise

    Can you duplex the 300 gsm card inside the machine?
    Or are you forced to print one side and then run the cardstock through the machine 2nd time to print the other side?
    Double sided heavier cardstock is more problematic than paper and this issue is a common occurence.
    Are you using the bypass tray or (if your printer allows it from a drawer?. usually there are limits to the stocks that can be run from drawers on smaller, less expensive machines)
    It may help if you make sure the correct media type/weight  and  drawer/bypass tray is selected correctly in your print dialog/print setup.
    There may be more than 1 place to select these parameters; check them all
    Also check the media/weight setting on the printer itself for the bypass or drawer you are using.
    There may be no real solution to achieving perfect registration from front to back on all type of media in your machine.
    Good Luck!
    Just realized you are printing from PDF. Make sure that Actual Size in selected each time in the print dialog when printing both sides. sometimes it defaults to Fit when you aren't paying attention and this can cause problems.
    You wrote: The invite has a thin black line around the writing.
    Do you mean they placed a stroked box around the edge of the invitation? This is a no-no. The crop marks should be adequate. A thin stroked box at the trim size will be an invitation to disaster when cutting a stack of printed items, even single sided would be hell, Double sided, forget it. Have them remove the box and just have crop marks. When cutting you will obviously cut off some of the marks which makes it difficult to determine the later cuts.  This is when you get out a ruler to determine the settings you need to make for these cuts using your cutter.

  • Why wont the image rotate on my screen? Where is the lock?

    The image stopped going to landscape on my 4s after installing 7.0.?. Is there a lock somewhere? I tried following on line directions but cannot find lock.

    Hello Wally,
    The orientation lock control is now located in the Control Center on your iPhone.  If you swipe up from the bottom of the screen, you will see the option to lock or unlock the orientation:
    Swipe up along the bottom of the screen to display Control Center (you can do this from any screen, including the Lock screen).
    Tap the Screen Rotation Lock button.
    If the button was highlighted, the button will appear dimmed after tapping it.
    I recommend reviewing the full article if the issue persists:
    iOS: Screen does not rotate
    http://support.apple.com/kb/TS3805
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When moving to Aperture 3, why upgrade the imaging system all at once?

    I have been reading about the library migration issues when upgrading to Aperture 3 and my question is this: what is the advantage, if any, of attempting to migrate all the images instead of just upgrading the database and tackling the images as needed? For example, with a 60 gig library of previously edited images, why would I bother migrating all the images when I could simply do that one image at a time, as needed, to take advantage of the new editing tools? Wouldn't this approach make the upgrade process infinitely smoother and faster?
    Apple says much the same thing is their support article here: http://support.apple.com/kb/HT3945
    So, for those of you forcing the images update process along with the database upgrade, my question is why take the risk? Yes I know it is supposed to work, and it probably does for most people, but why bother taking that risk for images you have already edited when you can easily do it an image at a time? Am I missing something?

    IDImager allows for Keywords to be written in hierarchical format. This means each individual keyword includes the parent keywords like this: "Others|Import|2009|2009-02-22". The only debate in my mind is about what will be more time consuming, writing and debugging a script to have exiftool extract the keywords and apply them hierarchical, or doing this task manually.
    From playing with the Aperture trial I deducted that making changes to keywords in the keyword HUD applies these changes to all images. Changing the "fred" keyword to "Freddy" will update all images that have the original "fred" keyword applied.
    We'll see. I am certainly not new to programming but have not used AppleScript before. Am still searching for a comprehensive guide and scripting examples that would help in pulling this off. But as I get closer to having the pre-processing outside of Aperture done for all of my images and very little accomplished in terms of the script I am leaning towards manually fixing my keywords.
    Adi

  • Why wont the images of my events show up in my project???

    Every time i start up final cut pro x my current project is completely fine. After i start working on it and moving events around in the project all of the images in the events that i have put in my project don't show up, load or re appear at all. No idea why this is happening, i even tried freeing up hardware space and deleted alot of events in my event library, by the way i just bought final cut pro x and this happened within 2 days of using it, please someone help!!!!!!!!!!!!!!!

    Have you tried trashing the preferences?
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

  • Why does the phone change from landscape at 20 degrees?  Horrible for watching videos laying down.

    Very annoying non feature for the iPhone is the inability to lock video playback in landscape mode.

    Sorry, I read your message too quickly. Most apps that show video automatically lock the screen in landscape; at least the built in youtube and a couple that I have do.

Maybe you are looking for

  • Black screen with white line

    I have a late 2009 Macbook.  Ocasionally when i open it up, i get a black screen with a bright white line at the bottom of the monitor.  Rebooting and closing the laptop doesn't change anything.  I can connect it to an external display and the displa

  • Computer authorisation

    Hi there - I am trying to use Adobe Digital Editions to download books onto my daughter's kobo.  I have managed to set up an Adobe ID/password which works on the main Adobe site.  The next step seems to be an Adobe dialogue box asking me to "authoris

  • Exception stack trace not found

    Hi all, I am using weblogic 92 application server. The deployed J2EE application has calls to exception.printStackTrace. I turned on Redirect Stdout Logging Enabled setting in the admin console and restarted the server. But I can see only log4j messa

  • Selling stuff of online game

    Hello so i was selling stuff of online game and now i got limited and i have to Provide Invoices they ask me this Please confirm that you own the merchandise you're selling. Helpful documents include copies of sales receipts, itemized lists of goods

  • Unwanted channels showing up in my favorites including x-rated crap

    Every time I try to use my favorites I get unwanted channels that I would never add to my favorites list