Why is the link to my form getting this message? I copied the link right from the page. An error has occurred. The form does not exist. Please re-enter the web address as the link may be misspelled. [ref: cixTdh4JnkymYgz7awKoQ, BadRequest]

My form - which was working great - disappeared when I did some editing; here is the message I get now.
The form does not exist. Please re-enter the web address as the link may be misspelled.
The link for the form is:
https://adobeformscentral.com/?f=UqJr%2Aas2RJIHPVA4iGIQ6w
Please look into the matter and resolve the issue at the earliest.
Regards,
Vaibhav Nigam

Similar Messages

How can I fixed an app that says An Error Has Occurred and it does not reinstall because the download was damaged?

I don't know why but I can't download Borderlands GOTY. I tried and it says this product is damaged please reinstall borderlands GOTY. I tried once again and it said the same thing. Then I tried a third time and now it won't install. It just says reinstall app in the Purchases list.

Restore it with a TimeMachine backup if you have used it previously.
If not delete all references to it, empty the trash, clear browser history, try a different browser.
Maybe try a faster internet connection to successfully download.

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

I tried to update my ipod but then it didnt work saying that an unknow error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it is on my screen, i dont know what to do?

i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?

Hi，
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!

Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support

When I try to use the refine edge command I get this message could not complete the refine edge comm

when I try to use the refine edge command I get this message could not complete the refine edge command because of programe error

Quit the editor, then restart it while holding ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document"

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document". Can someone please help me fix this? It's never done this before until now...

First go to the editor preferences>general and click this button, then restart the editor and try again. If that doesn't do it, more info, like your version of PSE and your operating system:

HT2589 Unfortunately, I have tried signing into Itunes for the past hour and keep getting this message: 'We're sorry we cannot complete your request on the itunes store at the time. Please try again later. Please help!

Unfortunately, I have tried signing into Itunes for the past hour and keep getting this message: 'We're sorry we cannot complete your request on the itunes store at the time. Please try again later.' I'm using a thinkpad laptop T430. Please help!

I have got the same problem. I am using windows 8.1, latest version of iTunes, Symantec NIS. My internet connection is working.
My apple Id and my password are correct since they work on my iPad and on my iPhone.
message is "ware sorry.we cannot complete your request on the itunes store at this time." And in smaller letters : "try again later". Which i did many times over several days. Just does not work.
any idea anybody ?

TS1717 What does mzcommerce.credit balance mean? I can`t buy anything on the app store because I get this message? Read more: What does mzcommerce.credit balance error mean on itouch? - Getting this message while trying to download apps all of the sudde

What does mzcommerce.credit balance mean? I can`t buy anything on the app store because I get this message?
Read more: What does mzcommerce.credit balance error mean on itouch? - Getting this message while trying to download apps all of the sudden :

i just received the same error.. checked everything in my account and cant find anything wrong.. i have also been getting some weird imap.gmail server not found i looked through all the boards and nothing is working.. i just recently upgraded to ios 5 and thats when the issues started

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

Downgrading the iOS is not supported by Apple.Have yo tried:
- Backing up and restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
- Go to the OverDrive support site

I am trying to publish my ibook. When I click the publish icon i immediately get this message: 'iBooks Author couldn't connect to the iBooks store'. My internet connection is fine, and this book was uploading fine yesterday. I want to change metadata

I am trying to publish my ibook. When I click the publish icon I immediately get this message: 'iBooks Author couldn't connect to the iBooks store. Check your internet connection, then try again.' My internet connection is fine, and this book was uploading fine yesterday. I want to change metadata.

When you are having problems with a site - consider weather between you and it and amount of traffic (time of day).
Bad weather can cause problems with a connection as it travels on the information highway - hazard a guess all traffic that went through Buffalo is being routed elsewhere.
Bad weather can slow down handshake etc to the point of requiring too many resends - so Ibook is timing you out.

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

Hi vindog60,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
Issues installing iTunes for Windows - Apple Support
Cheers,
Alex H.

An error has occurred:Item SI_XSLT_INFO was not found in the collection

I am trying to schedule a report in BO XI R3. But I get the below error when I click on the format link.
An error has occurred:Item SI_XSLT_INFO was not found in the collection.
Any ideas?
Thanks

I encountered this same problem. When going from XI R2 to XI R3, I had imported all the reports so converted to CR2008. One of the users had a version of this report on his desktop from XI. He saved it out to BOE XI R3 and then when trying to select format from Infoview when he was scheduling it, he would get this error message. I just opened this report in CR2008 and then saved it back out to BOE and it worked fine.

Part of Photoshop isn't functioning. Under adjustments, when HDR toning is clicked on I get a code: Error 48: File or folder does not exist. Line:11 - $.evalFile(g_StackScriptFolderPath "StackSupport.jsx"); How can it be fixed?

The phone company was here working on something while I was gone. They sat down at my computer (iMac) and since then HDR toning doesn't work. Get the code: Error 48: File or folder does not exist. Line: 11 -> $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx"); How can this be fixed?

Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

Why is the link to my form getting this message? I copied the link right from the page. An error has occurred. The form does not exist. Please re-enter the web address as the link may be misspelled. [ref: cixTdh4JnkymYgz7awKoQ, BadRequest]

Similar Messages

Maybe you are looking for