Why is their a black bar on right side of last frame?

Since the most recent update I have black verticl bar on the right side of the last frame in Premiere Pro CC. I have tried cutting, reducting expanding, everything I can think of, but to no avail. Has anyone else experienced this and if so, do you know the remedy? This is causing me to have 3 projects falling behind.

Feel free to tell the team how you feel.
How about letting us have "the teams" "social media" addresses and we can really have a discussion about this.
Isnt that the way it works these days?
Feature Request is just a "hurdle of convenience" and this site should be serving the purpose in its own right.
ie. Users providing (valuable) free opinions from experience ... directly to Adobe. (and the NSA)
I hate the pointless "end of sequence" indicator if my many posts on the matter happened to have slipped by anyone who cares.
To date...still no one defends its inclusion in Premiere Pro. Not even "the team" !

Similar Messages

Why am I getting black bars on the sides of my widescreen assets?

I am importing video, shot and edited 1920x1080p23.976, into Encore. The goal is to burn a DVD from this asset. I've tried exporting the project (from Premiere CS5.5) in every format on the list, and no matter what when I import it into Encore it show up in the monitor with narrow black bars on the sides. The assets are correctly being formatted for 16:9 (non-square pixels), but the video is just not filling the screen. This seems like it should be a simple thing, why can't I get this?
Thanks,
Steve

I'm going crazy trying to get the footage to actually crop. I have sequences imported from my Premiere project vis Dynamic Link. If I go into my quality presets inside Encore CS5 I can setup a top and bottom crop as in Ann's screenshot and then switch to output. It looks perfect. But when I save that as a new preset and apply it to my clips, the cropping does not apply.
I have tried over and over, new presets, double checking over and over and while the preset is applied, the crop does not kick in within Encore monitor or within the DVD preview. pillarboxing (black bars) are still present.
I don't understand why Encore has a cropping feature and then COMPLETELY IGNORES the cropping feature. Am I missing something.
So far all I can figure is to setup a new sequence in Premiere for every Chapter that is set to DV 24p. Then drop in the main sequence which is 1080p and resize it in the motion settings to 45.6% so that it fills a DV frame. At that point I can import that sequence to Encore and it looks fine.
Is this the best Encore can do? I would really rather link up the full 1080 sequences because otherwise I'll have to rebuild the entire thing if I want to make a BluRay.
Does anyone have any other suggestions or know how to get cropping to work on Encore CS5 (Mac).

320x240 QT export produces black bars on right and left

Ok, this one is strange. So far, it only appears to affect 320x240 targets from sources that don't have square pixels. Starting with a 720x480 DV movie (even if I change the properties to display 640x480), I export directly to 320x240 and I get a movie with black bars down the right and left. I did not tell QT to letterbox or scale, although telling it to scale does no help.
The problem seems to be in the meta data. If I go to the movie's visual properties and change the move dimensions to 324x240 (with preserve aspect ratio unchecked), then the black bars disappear. When I change it back to 320x240, they are still gone and the movie plays fine. I save it and reopen it, and the black bars are back! The same thing happens exporting from Final Cut Pro using Quicktime conversion. This is definitely a bug.
The work around is to export to another 4:3 format with square pixels first and export that to 320x240.
On a related note, the same thing happens when I record a movie in Quicktime at 320x240. I get a recording with black bars down the sides.
This has never happened to me before. I'm a professional QT software developer and a content producer. I've been using Quicktime Pro for a decade, at least. I've been over all of the export settings, and I've deleted all of my Quicktime preference files.
Is there a way to report a bug to Apple?

Regarding: "there's a pretty good chance that your playback target isn't Quicktime Player"...
My assumption is that if your material is 320x240, it's probably that size because you're planning to either display it on a small-screen device, send it to a TV set, embed it in a presentation, or deliver it via the Web. In any of those cases, your final delivery target isn't QuickTime Player, but rather some other mode, such as the QuickTime web plug-in, iPod, AppleTV, or even some other option. In which case the strangeness with the player doesn't seem so strange.
As a workaround, you could layer your 320x240 movie with at 350x240 grey rectangle on the layer behind. That would fix it in QuickTime Player, but it would cause grey bars on either side if you embed into a web page or something like that.

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Bad video card, call Apple, get a case number and return it.

When I rotate my video clip so that is isn't viewed sideways, it has black bars on both sides and some of picture is missing. Can I rotate the image so it plays rightside up without the black bars? The image was taken by an iPhone. I am viewing it on PC

When I rotate my video clip so that is isn't viewed sideways, it has black bars on both sides and some of picture is missing. Can I rotate the image so it plays rightside up without the black bars? The image was taken by an iPhone. I am viewing it on PC

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Using footage from my iPhone 4, how can I remove the black bars on the sides of my picture? Or change the color to white...

My footage is vertical and there are two black bars on the side filling in the rest of the picture. I want to imbed this into PowerPoint without the black bars on the side. Any suggestions on how I can remove them or at least change the color to white? I changed the background color in View > Background > White, but it was only for editing purposes and didn't keep the color after rendering.

To change the background to white, in FCE, place the video on track V2 and place a color matte generator on track V1. The default color for the color matte is grey so you'll need to change it to white using the color picker.
-DH

I dont know how to get rid of the black bars on the sides of my videos. The original clips dont have them but when i import them to fcp it puts them there

The original clips dont have them but when i import them to fcp it puts black bars on the sides of my video and i cant get rid of them

Here's my final (and simple diagnosis) You have 4 x 3 footage that your are trying to screen at 16:9. This won't work.
Artistically, you have three options:
1.) Stay with the "black bars." What some of us call "Bat Wings," in the biz.
2.) Do what some editors do and create a large "fuzzy" background to extend the edges...
3.) Or transform / crop the image. (Or just use the "fill" option in the "Spatial Transform" section of the inspector
But... You WILL lose some of the image

Why am I losing the right side of my frames?

I am working with video originally shot on handled camer with an SD card that has then been copied to a DVD. The VOB files are 720x480 and 29FPS. When I add the media I have tried several project pre-set settings, however all of them are cutting off the right side of the frame of the film and I need that for my clips and to make my movie. How do I get the entire frame to be imported and available?

A.T. Sorry about that, I was including them in the emails but didn't realize they weren't posting. Here are the steps I followed and the screenshots.
Changed settings to DV Standard
Checked “Force selected Project Setting on this project” and clicked OK
Went to add media and chose a file from the disk.
Below is how it appears on the monitor. As you can see, the right side is cut off as it should have the full date (To be clear, it is not just the date I am interested in, but the rest of that frame.
I confirmed that the magnification “Fit” was checked and went to Edit Preferences and there is a check next to default scale to frame size and none of that fixed the issue.

Why do I get black bars in my .mov file (AME CS4)?

Hi
I got a .wmv. It has the size 720*540. Everything is fine. No black bars
Except ... I need the file as a .mov.
When I encode it in AME and choose Quicktime I get black bars in the right and the left sides of the movie.
In AME I can see that my source and my output sizes are not the same. The output size is only 720*480, but I can't change it to 720*540.
What can I do to get rid of the black bars?
Thank you for any help you may provide.

As Jim's answer indicates, some codecs enforce specific dimensions. Most relevant here is the fact that codecs intended for television are strictly constrained to the sizes for television standards. You have chosen an NTSC (National Televison Standards Council) codec in the Video Codec menu, which gives a rather strong hint that this is one such constrained codec.

Why is there a black bar above my menu bar on my homepage?

On my homepage, above the line with file, edit, view, etc., there is a thick black bar that won'e go away. I've tried re-starting, and to no avail! Please help!

Ive restarted it several times and it didnt help but just for good measure I tried it one more time just now and the problem totally went away, thanks man!

Why are some text missing from the right side of a page I send to my printer? Thanks

Why is some of the text missing on the right side of a page I send to my printer?

I came across something similar recently where it printed the left hand side only!
If I want to print an email, instead of File > Print ( does not print properly ) I click on the print icon on my email webpage ( do not use applemail and access gmail direct) which then takes me to print preview showing the complete email which prints ok.
Some webpages ( File>Print) do not print properly and some do. Those that do not generally have their own printer icon (path) that needs to be clicked on.
Maybe something to do with encryption but don't know.
Hope this helps in some way.

Display got discolored 2" bar on right side

Hi,
A strange thing has happened. My iMacG5 20" suddenly and without apparent reason displays a discoloration of 2" wide, from top to bottom, on the right side. Inside that 2" wide bar white becomes greyish and my folders seem to be polarised. Have tried to make new account, but problem remains. This problem started lets say two weeks ago, but went away until now. Now the problem seems to persist. Is this the video problem as meant in the repair extension program? Or could it be something I can fix myself? Please advise!
Thanks in advance and greetings from Amsterdam.

to Steve: This is exactly the same problem as with my iMac. How old is yours? By the way I now know a lot more about this issue. The 20 inch LCD screen is devided into 12 segments. It appears that our iMacs suffer from a defective segment. Any of these segments can become defective or even break down completely. If that happens the broken down segment gives no image whatsoever. If you bring your iMac to Apple, like I did, they will say the screen is dead and needs to be replaced. If your machine is outside their 1 year warranty and has no extra AppleCare, they will charge you appr. 700USD for a new LCD panel (Apple part nr.661-3609) or even more for the panel in the bezel (part nr. 661-3318). The thing is that the panel used in this iMac, the LG.Philips LM201W01(A5)(K1), has a standard 3 year's limited warranty. So I am now trying to find out if a longer warranty period is applicable if the panel is not mounted in the Apple iMac. I sure hope so! Secondly, Apple could be forced by European law to extend their warranty to 2 years, that is in certain cases. But this only applies in Europe, of course.
Regards, Ernst

Mini-DVI to s-video: black bar on left side

Hi,
When outputting video through "the mini-DVI to s-video adapter" i have a black bar on the left side of my television.
It seems like the 1024*768 resolution is not able to completely fit the 4:3 area of my television (the image is to small).
any ideas?
thanks!

I'm absolutely sure everything is displaying and that the image is not deformed in any way.
So my conclusion is that the image is just smaller (in every dimension) than it should be and than it was before.
I will try a lower resolution later today.
thanks for your help and interest!

Aspect ratio: 4:3 material being exported with black bars (on the sides!)

Hi all
I'm fairly new to using FinalCut Express: previously I've used other non-linear video editors on Windows.
I'm having a bit of a weird problem: I've got a sequence which was shot entirely in 4:3 (PAL). However, when I try to export that to a QuickTime movie it appears squashed from either side — black bars appear at the sides of the frame and everyone looks very tall and thin. The frame itself is still 4:3 but everything is being squashed to fit in the bars.
I've fiddled with as many settings as are immediately obvious to me to see if I can rectify this, but so far no banana: the sequence is about 90 minutes long and takes about 30 minutes to render each time when exporting.
Has anyone got any ideas what to do about this? I've been trying to do some research into how FCP/FCE handle different aspect ratios, and it seems to be a very complicated topic. In fact, in the same project I've got a sequence which contains almost entirely 16:9 anamorphic material. Ideally I'd like this to be output in a 16:9 frame with the few 4:3 clips appearing with bars on the side. However, it's only being output as 4:3 where the 4:3 clips appear full-frame and the 16:9 clips have bars at top and bottom...
Hope someone can help!
Mac Pro: 3GHz, 6GB RAM, X1900XT, BT, AirPort Mac OS X (10.4.8)

Tom, thanks for the reply.
Everything looks absolutely fine when played back in FCE; it's only when exporting to QuickTime that my problems start. The point is that this 4:3 sequence isn't being output into a 16:9 frame as a pillarbox: what's actually happening is that it's being put into a 4:3 frame with bars, with the result that the content is in fact being squeezed (it looks wrong).
How can you modify the aspect-ratio settings for a given sequence? I've looked through all the obvious sequence properties settings but have never found anything.
I'll just reiterate — it plays back fine within the viewer; only when output does it all go awry.
Richard

Black specs on right side of paper

I have very small black specs being printed on the very edge of the right side of the paper, on the front. If I use the duplexer the specs are on the same side of the paper on the back, so it's coming from the right side of the printer. I do see a pattern to them. It starts at the top and repeats the pattern every 1 7/16 inches. There are three dots, the second one being about 5/32 inch from the first, and the third being 9/32 inches from the second.
I've cleaned out all the loose toner that I could from the cartridge area, and it didn't seem to help in the slightest. How can this be fixed?

I forgot to mention that this is a HP 4700.

Why is their a black bar on right side of last frame?

Similar Messages

Maybe you are looking for