Why isn't my ipod working properly

I wanted to listen to some music so I looked in my music library and all of my music had gone! also, when I looked at my app pages to play on  an app, they all were waiting to download for some random reason (they were fine before, I've had these apps for quite a while)
Any suggestions on what to do???
Please help!!!!

This definitely sounds like a carrier-problem. Maybe your iPhone is affected by the infamous "grip of death". Try not to "hug" the phone as much when holding it, and make sure you have the very latest updates for iOS. If the antenna is faulty, you will have to contact Apple.
Cheers

Similar Messages

  • A Long and Involved "Why isn't my iPod working?"

    Hoooookay, so...
    My iPod is having problems. It's a second gen, but I did get the battery replaced about 9 months ago so I'm still ok on that front. Here's my problem:
    I haven't used it in a while (since before the iTunes 7 update), and while trying to plug it in to my PC via Fire wire, it started syncing up with iTunes 7. It said something about needing to restore it, so, rolling my eyes I clicked the "Ok, erase all my music and restore my Ipod" button.
    Unfortunately, during the "restore" I got a little error message that said it messed up. "Frick," I said aloud. So I figured, it must be something with the PC or iTunes. I shut down my compy to try again. Unfortunately, my iPod was completely frozen in the process and stayed that way for about a day. I figured it ran out of batteries, so I plugged it back in and it seemed to be working fine. However, restore had notably done its job, meaning all of my songs were erased.
    So I plugged it back in, and I got no dice. This time iTunes just ignored it completely. So I downloaded and installed v.7.02 to alleviate the situation. Once again, no dice. Now my iPod and computer are acting altogether very strange. I have over the course of this difficulty restarted and started my ipod many times, but an interesting thing happens. After I've restarted it, and I plug in my iPod, if I have iTunes up, iTunes merely freezes for about 3 minutes, then unfreezes showing no iPod. Windows recognizes the iPod as some sort of drive/media player, calling it drive F:. When I ask windows to safely remove my ipod, it does, but my ipod just freezes like it did last time. Fortunately, in the course of my investigation, i learned how to reset it, and that seems to get it out of freeze mode. However, when I re-plug it in, my computer makes a "ba-ding" sound, as if it recognized it, but it shows up nowhere. No windows drive, no nothing, just a ba-ding sound. If I restart my computer, it will recognize the ipod as a drive again (the first time I plug it in) but anytime after that it just makes the noise and doesn't recognize it at all...
    Help?
    HP Dv4000   Windows XP  

    First
    Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Change your iPod drive letter
    http://docs.info.apple.com/article.html?artnum=93499
    Reconnect it with your PC, open iTunes and click Restore.
    If still does not solve then
    . Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

  • I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Why isn't my iPod 6th generation not being recognized by iTunes?

    Why isn't my iPod 6th generation not being recognized by iTunes?

    Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes

  • Why isn't my IPod showing  up in itunes?  Receiving message "itunes could not connect to this Ipod because an unknown error occurred 0xE8000003.

    Why isn't my IPOD showing up in itunes?  Message recevied "itunes could not connect to this IPOD because an
    unknown error occurred  OxE8000003.

    See here: iOS: Unknown error containing '0xE' when connecting to a Windows PC
    B-rock

  • Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2

    Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2?

    I found that all the movies that I want on my nano have iTunes extras.

  • Why isn't AE CC working on Mac OSX 10.9.1?

    Why isn't AE CC working on Mac OSX 10.9.1

    > ANd where in the heck do you get it if not through the "official" tool?
    Manual downloads of our updaters are available from our website. Follow the links here:
    http://blogs.adobe.com/aftereffects/2013/10/after-effects-cc-12-0-1-update-fixes-crash-on- mac-os-x-v10-9-mavericks.html

  • Why isn't my itunes working?

    Why isn't my itunes working?

    itunes on ios or on a computer?
    does it provide you with some sort of error msg?

  • Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Many, many thanks for both of you Todd and Rick.
    to Rick:
    I suppose you mean the Color Settings in Project Settings as follows:
    - Working Space: None
    - Match Legacy ... Gamma Adjustments checked ON
    But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
    to both of you:
    Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
    What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
    So, would you have any solution for this problem?
    Again, many thanks for your fast replies!

  • Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

    Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

    sounds like the cable or the iphone connector are somehow damaged

  • Why isn't remember me working on sites that I have been using for years on my iPad but fine on my iPhone?

    Why isn't remember me working on sites that I have been using for years on my iPad but fine on my iPhone?
    Both have recently been updated with IOS7

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • TS1382 My iPod works properly if only connected to my PC - disconnected it goes blank.  Is this and old battery issue?

    My iPod works properly only if connected to the USB port on my PC, unplugged it goes blank and stops working.  Is this an old battery issue?

    Yes.  It sounds like the iPod's battery is on its last leg.  If you want to keep using your iPod you'll want to have the battery replaced either by Apple, a third party company, or you can even buy the replacement part and swap it out yourself.
    If you want to go through Apple's site, see here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    B-rock

  • TS4268 Why isn't my iMessage working?!

    Why isn't my iMessage working?!?

    go on settings and scroll down to "MESSAGES" make sure iMessages is ON, now scroll down just a bit and look for an option reading "send & Receive" click on it and make sure it is either your apple ID or your phone number, wait 1-3 hours or over night and it should work, sometimes it takes a while to activate, ive come across this issue many times, hope it worked!

  • Why won't my iPod work on iTunes or my computer?  It shows up (not on iTunes) and the iPod shows connected but it has to be "formatted." And why are half my songs unable to play on it anymore?  It just skips them!

    I've read through several discussions and I've seen a lot of similar issues but none that were quite like mine.  Every time I plug my 3rd gen. iPod nano in it shows it connected on the iPod screen and iTunes opens up but the device does not show up in iTunes.  The icon on the iPod shows connected and gives the arrows circling showing syncing even though it still says connected.  But it won’t show up in iTunes.  It shows up on my windows computer but I can’t click it or make it do anything.  It keeps saying “You need to format the disk before you can do anything.”  And when I hit cancel it beeps and says "Location not available.  Dara error (cyclic redundancy check)."  As if I know what that means!!  And I have 800 songs on it but they aren’t all on my computer and some are on my parents’ computer but I can’t get to that one.  It shows it is a “FAT32” which I have no clue what that means but I’ve never noticed that before.
    Windows "can't access the disk" and I don't know why.  It gives me that notification if I try to check the drive or disk or device for problems.  And if you click it on Windows it pops up a screen with formatting things (which I don't know anything about).  And then it closes and says that it CANNOT format the device.
    The iPod works almost okay when it isn’t plugged in, but I’ve noticed that half my songs won’t play.  You click on it and it plays the next one in the album.  And it isn’t always the first song in an album but random songs.  And songs I listen to a lot.  You can’t go back (you can only go forward and you can’t skip over the ‘missing’ song) or even click to select those songs.  But other songs play normal, just not half of them that are on the iPod but all of a sudden no longer work.  And I don’t know why.  I have another 3rd gen. iPod nano that doesn’t have ANY of these problems.  It hooks up, it doesn’t need formatting, and all its songs play.  I don’t know what is wrong or what to do.  I’ve tried re-downloading iTunes and everything.  I don’t want to have to reset my iPod and lose everything.
    I’ve tried locating the device in iTunes and it shows the iPod but it gives this weird symbol and I can’t select it.  It’s like a white box with a box that is outlined in blue with six random icons in the middle.   I’ve seen it before and it always means something is wrong or a file (which is where I have seen it before) is corrupted.  And like I said I have a second iPod nano of the same generation and it does not give this weird symbol.  Plus it connects just fine.  It’s this one iPod.
    I don’t understand what is going on.  It worked just fine and then all of a sudden I noticed songs wouldn’t play so I went to plug it into iTunes and nothing has worked.  I’ve searched discussions and none of the tips help.  But I want my songs to play again and I want my iPod back.

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • Why isn't my ipod and iphone not connecting to my new laptop on my itunes that i have downloaded

    I do not understand why my ipod and iphone not connecting to my new laptop that I got for Christmas. It did for a while and now its not. My itunes is up to date and so is my phone and ipod. Why isn't my itunes finding/syncing my ipod and iphone?!

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

Maybe you are looking for

  • Connecting a Kodak printer to my new iMac

    Help! I'm trying to connect my Kodak printer to my new mac. I have downloaded the software from the Kodak site but when i try to run it the following error message appears- "cannot be opened because it is from an unidentifed developer"!!!??

  • Fcp wont capture

    on my g5 fcp aborts capture and i get a dialogue box saying that there is a problem with the tape. i have the same problem with multiple tapes from different sources and 2 cameras. fortunately, i have a macbook pro and am not having any problems capt

  • Cant view stills or video on viewer in 10.1

    Hi all I have recently updated my FCP to 10.1.1.   I have imported stills and videos into the timeline. I have the first still selected except it doesnt show in the view only where the timer is? Also, has the Kens Burn effect been removed.  When I cl

  • Where to find the APN

    In bb q10 where it si possibile to' check the APN to' be scure that the devi e si using the APN blackberry.net? Thanks for helping Solved! Go to Solution.

  • Select-option_multi filll

    Hi.... All...   iam having field F1 in my selection-screen... Now how can i pass 10 different values to that F1... These are not serial entries... i mean... if i write... F1-low = 1. F1-high = 10. F1-sign = 'I'. append F1. ... it will not fill with 2