Why isn't the new iOS4 update compatible with the 1st generation iPod touch

It makes me extremely angry that i have wanted what the new update contains ever since i got my ipod and now I can't have it because whoever made the update didn't make it compatible with the 1st generation iPod touch. Ig someone could give me a good reason as to why this happened that would be much appreciated.

Doesn't have the needed hardware in particular not enough RAM.

Similar Messages

HT2305 can I put a newer version of ios on my 1st generation ipod touch?

I have a 1st generation ipod touch. it has ios2.2.1. I want to update to a newer version. Is that possible?
Thanks

Yes. Click here.
(74239)

Is there a compatibility issue with the iPod Touch 4th generation and the TomTom carkit that worked fine with my 1st generation iPod Touch?

I recently purchased a new iPod Touch. The "keyboard" of my first generation was beginning to play up, but it still worked fine with my TomTom carkit (if you'll allow for the fact that being restricted to OS 3 meant you couldn't update the software either). But, contrary to what I'd been told, the fourth generation one refuses to work. I think it's making contact because I hear the connection beep, but it doesn't charge up or seem able to find the satellite connection. I've seen someone saying it was a physical width problem. If it's making contact, why isn't it capable to pick up a signal? Is there a compatibility issue after all?

Got you! Why this didn't come up in my search before, have no idea. So it's all a question of design... How mean not to inform manufacturers of accessories about the change in specs. About to try the folded-over business card solution and then Velcro if the former doesn't give satisfaction. Did actually buy a silicon case, but it makes the protective filter buckle as it gets under the edges which isn't exactly useful. Went back to my previous leather case which I have to remove to use the car kit...

Is any of the new operating systems compatible with the older macbook air

Question

All MacBook Airs can run Mac OS X 10.7.4(except those which shipped with Mac OS X 10.8.) Models made since late 2008 can also run Mac OS X 10.8.
(69320)

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Why do the new earphones not work with 1st Generation iPod touch?

Does the 1st generation iPod touch not "recognise" [recognize if you are American] these functions? I am talking about the microphone and the button on the new earphones.

Ray2104 wrote:
Then why don't apple make ear phones with microphone which the 1st gen itouch will recognised...
Because the Touch is primarily a music player, that is what I purchased and I'm quite satisfied with it as it is.
I'm so fed up of the way Apple Market...
What are their plans for their consumers... to
to keep buying new Ipods?!?!?!
Err...Yes! Welcome to the real world.
3G Iphone was released shortly after the Iphone...
why couldnt they make us wait longer...and get the 3G
You still don't understand this commercial world do you?
same with Ipod Touch... yes i Understand new Gen ipods...would have better features...
Let's all wait a hundred years when they bring out the the brain implants...
But hey wats up with making us fall with Apple...we like the designs, the features...but why then bring in new ones that apple know will not let our old ipods adapt to it.
You like the design, you buy it, enjoy what you have and don't get so jealous.
Sick of Apple... they do it on purpose... I guarantee...
No way?!
the new Iphone to realease next year....would be Iphone 8.0 mega pixels camera video recording....either way...they would make their customers regret for buying their old Iphones and Ipods...
If so, then I might buy one, but then I wouldn't moan if a better one was released six months later.
4 now, do something about the new ear head phones....cos apart of app store and applications...we want to be ablt to use microphones...to communicate on social networking...and voice memos...
This maybe because the hardware is simply incompatible, they cannot cover every eventuality, had they done so the Touch would have been more expensive and I would not have bought one.
Technology moves on, fact. I you don't feel Apple are playing fair then just avoid their products, that'll learn 'em.
By the way, if you want Apple to hear your thoughts go here - [Feedback|http://www.apple.com/feedback/ipodtouch.html]
They do not officially monitor this board.
Regards,
Dud.
Message was edited by: Duddo

I've got a payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer styl

i've got a vodsaphone payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer style that works In smart phones? if so, how do i go about getting the right card.

Contact your carrier & get a new sim...they should give you one for free.

HT4061 Help! I've updated my iPhone 4G with the new iOS7 update and entered the passcode in it and now my iphone is diabled because I can't remember the passcode and the screen keeps showing "iPhone is disabled". Have I lost ever having no access to my iP

Please help. I can't use my iPhone 4G with it's updated new iOS7. I can't remember my passcode and it stays at "iPhone is disabled". Have I lost the use of my iPhone forever? It's an iPhone not iPad.
Message was edited by: diana135

HT4061 Help! I've updated my iPhone 4G with the new iOS7 update and entered the passcode in it and now my iphone is diabled because I can't remember the passcode and the screen keeps showing "iPhone is disabled". Have I lost ever having no access to my iPhone?

HT4818 why doesnt the new macbook pro come with the windows installation disc?

why doesnt the new macbook pro come with the windows installation disc?

Because it is a Microsoft product. it must be purchased separately.

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

The provider is not compatible with the version of Oracle client

We are running Server 2012 64 bit with multiple homes one is 32 bit and the other 64 bit. We installed the 64 bit first then the 32 bit next in order to get our Classic ASP WebSite that is using COM+ and OLEDB to see the provider.
C:\oracle\product\12.1.0\x86
C:\oracle\product\12.1.0\x64
The other Websites are ASP.Net 4.0 and are running in 64 bit application pools. They are using a DAL .Net assembly built x64 with a reference to the 64 bit ODP.Net version 4.121.1.0 in C:\oracle\product\12.1.0\X64\client_1\odp.net\bin\4.
I also see there is another folder C:\oracle\product\12.1.0\X64\odac_1\odp.net\bin\2.x with version 2.121.2.0. We are on running Framework 4.0 but when I switch to this version it works but with the version out of the bid\4 we are receiving the following error when the 64 bit Websites call the assembly:
The provider is not compatible with the version of Oracle client
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Source Error:
Line 87: mDataSource = dataSource
Line 88: mConnectionString = GetDBConnectionString(dataSource)
Line 89: mConnection = New OracleConnection(mConnectionString)
Line 90: mParams = New List(Of IDbDataParameter)
Line 91: End Sub
I have not been successful in getting this to work after spending endless hours, so any help would be appreciated.

Hi,
Oracle Client/ODP build with certified Visual C++ Libraries so application using ODP.NET requires "runtime components of Visual C++ Libraries" to be installed.
Oracle Database Client installation includes the Visual C++ Libraries but ODAC doesn't contain these libraries which may cause such issue.
Please check the Note 43208.1 for the particular version of Visual C++ installs with Oracle Database Client installation(e.g. 11.2.0 Database Client installs Visual C++ .NET 2005) and also you can refer the windows event log error massage to verify which version of Visual C++ is missing.
thanks and regards
Venkat

'The provider is not compatible with the version of Oracle client' exceptio

Hi
I installed ODAC-11.1.0.7.10 Beta on my development system and developed a .net application which uses Oracle.DataAccess.dll to connect to Oracle10g database.
the application is working fine, means opening connection successfully when I run it from my development system. but the same application is throwing
'The provider is not compatible with the version of Oracle client' exception when I run it on my 10g database server system.
what I need to do to run the application successfully on the machine where 10g server exists?
any help is appreciated.
thanks,
harry

Hi Harry,
I am not sure why you installed 11.1.0.7.10 Beta as 11.1.0.7.20 has been released and you should not be using the beta at this time. That error message is because the dependencies being loaded by the process are the wrong version. When you deploy an ODP .NET application using 11.1.7.x, you need to make sure you deploy it to a machine where the 11.1.0.7.x dependencies are installed. My guess is if I read your poat correctly is that Oracle.DataAccess.dll version 11.1 is loaded but its finding 10.2 dependencies on the target deployment box.
HTH
Jenny

I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. what do i need to do?

I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. What do i need to do?

Does it happen with the apps that came with the iPod?
Does it happen with all apps you have downloaded/installed?
Have you ried deleting the apps and redownload/install the apps? You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
Next would be to restore from backup
Last would be to restore to factory defaults/new iPod.

Hi i have recntly updated my 1st generation ipod touch ,and it has wiped all my music . Mi tunes libary which was on an old laptop i no longer own . How can i get my i tunes libary on to my new laptop and retrieve all my purchased music

Hi i have recently updated my 1st generation ipod touch to find that it has wiped all my purchased music .My itunes libray is on an old laptop i no longer have . any ideas please

Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.

Essbase answers - None of the fact tables are compatible with the query request "member"

Hi,
I have modelled an Essbase database into the repository.
If I pull the measure, period and year dimension in and filter on the year (member) and display the year (member) along with the period (alias) and measure it errors with =>
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Fiscal Year.Fiscal Year Code. (HY000)
However, all other things being equal if I change the year displayed to the alias then it works.
Anyone tell me why??
Is there a limitation that Essbase brings through that you cannot view what you filter on?
thanks,
Robert.

Hi
i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
Gl Balances : D1
Code Commbination: F1
Gl Sets Of Books : F2
I have checked the joins in physical and BMM layer..all are fine..

Why isn't the new iOS4 update compatible with the 1st generation iPod touch

Similar Messages

Maybe you are looking for