Why my RMI is not Working in Linux???

Hiii how ru?
I am Rahul here
Well I have a problem that my RMI in not working on Linux.. so can u tell me the solution to my problem???
When i am typing following command i am getting exception as RmiNotBoundException
java -Djava.security.policy=my.policy ChaClient&
however my Server is Starting normally but client is not connection to server.
so please tell me the solution to this problem
U can contact me at
[email protected]
[email protected]
Thank u Very much...

i ran into the same issue dealing with RMI and Linux. My issue was the the stub that linux was giving you gave in the host field the ip number of "127.0.0.1" which tried to make the client connect to itself. this is how i got around it:
java -Djava.rmi.server.hostname=<ip that other clients will connect to>
so, for instance, if on a client you connect to the server with an IP of 10.5.0.1, then when starting up the java vm, you start it
java -Djava.rmi.server.hostname=10.5.0.1
hopefully that helps

Similar Messages

KeyListener not working in Linux

Hello guys, I'm having a weird problem I was hoping I could get resolved.
I finished a Pong applet for my Java class, and it works just fine under Windows and on my Mac.
But when I run it under Linux, the Applet doesn't work correctly.
The applet draws, and my timer works, but my KeyListener does not work.
I believe all of my Java files are updated properly.
But I do not understand why KeyListener does not work under Linux, but it does in Windows.
I then made a very basic applet just to test my KeyListener, and it still does not work.
This is how I was taught to do KeyListeners, but if I'm doing something wrong, please help me out!
here is the basic program code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Test extends JApplet implements KeyListener
int x = 0;
int y = 250;
public void init()
addKeyListener(this);
public void paint(Graphics g)
g.setColor(Color.white);
g.fillRect(0,0,500,500);
g.setColor(Color.black);
g.fillRect(x,y,50,50);
public void keyPressed(KeyEvent event)
int keyCode = event.getKeyCode();
if(keyCode == KeyEvent.VK_RIGHT)
x += 10;
public void keyReleased(KeyEvent event)
public void keyTyped(KeyEvent event)

What if don't use a KeyListener but instead use key binding? For instance,
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
@SuppressWarnings("serial")
public class Test2 extends JPanel {
private static final int DELTA_X = 10;
private static final int DELTA_Y = DELTA_X;
private static final Dimension MAIN_SIZE = new Dimension(600, 600);
enum Arrows {
    LEFT(KeyEvent.VK_LEFT, -DELTA_X, 0),
    RIGHT(KeyEvent.VK_RIGHT, DELTA_X, 0),
    UP(KeyEvent.VK_UP, 0, -DELTA_Y),
    DOWN(KeyEvent.VK_DOWN, 0, DELTA_Y);
    private int keyCode;
    private int deltaX, deltaY;
    private Arrows(int keyCode, int deltaX, int deltaY) {
      this.keyCode = keyCode;
      this.deltaX = deltaX;
      this.deltaY = deltaY;
    public int getDeltaX() {
      return deltaX;
    public int getDeltaY() {
      return deltaY;
    public int getKeyCode() {
      return keyCode;
int x = 0;
int y = 250;
public Test2() {
    setBackground(Color.white);
    setPreferredSize(MAIN_SIZE);
    InputMap inMap = getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
    ActionMap actMap = getActionMap();
    for (Arrows arrow : Arrows.values()) {
      inMap.put(KeyStroke.getKeyStroke(arrow.getKeyCode(), 0), arrow);
      actMap.put(arrow, new MyAction(arrow));
private class MyAction extends AbstractAction {
    private Arrows arrow;
    public MyAction(Arrows arrow) {
      this.arrow = arrow;
    public void actionPerformed(ActionEvent e) {
      x += arrow.getDeltaX();
      y += arrow.getDeltaY();
      repaint();
@Override
public void paintComponent(Graphics g) {
    super.paintComponent(g);
    g.setColor(Color.black);
    g.fillRect(x, y, 50, 50);
import javax.swing.JApplet;
@SuppressWarnings("serial")
public class TestApplet extends JApplet {
public void init() {
    try {
      javax.swing.SwingUtilities.invokeAndWait(new Runnable() {
        public void run() {
          createGUI();
    } catch (Exception e) {
      System.err.println("createGUI didn't successfully complete");
private void createGUI() {
    getContentPane().add(new Test2());
}

Why does quicktime does not work on os lio

why quicktime x does not work on OS Lion

QuickTime does work under 10.7, however you may want to check that you're opening the newest copy of it by going to your Applications folder and opening it from there.
If you keep having trouble with opening it, please let us know what error you might be getting. QuickTime X will open with just a menu bar, then you can go to the file menu and choose to open any file you wanted to open, or choose one of the screen or audio recording options.

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Why does Acrobat suddenly not work on my Mac (won't open pdf files from a web page), yet I can open them from my iPhone? Everything worked fine yesteray.

Hello:
I have a Mac running OS 10.8.5 and I use Acrobat Pro and Acrobat Reader. Today for some reason, any time I try and access a pdf file from a web page, it won't open. I get a blank window. PDF files already on my computer open fine and I can create PDF files from Word docs, but I can't download or view any pdf file from any web page. Strangely, PDF files on web pages open just fine on my iPhone.
I checked that both my copy of Acrobat Pro and Acrobat Reader are up-to-date. They are.
I checked that my copy of Firefox is up-to-date. It is. And nothing changed with Firefox within the last 24 hours.
I am a humble computer end-user. I am baffled as to why this would suddenly not work. I have not changed any settings, etc. Any help or suggestions would be greatly appreciated.

Thank you.
I checked your instructions you sent and as far as I can tell all of my settings, etc for Firefox (plugin updates and preferences) are correct but I am having the same problem.
However, everything works in Safari. I don't have time to attempt to diagnose why Firefox no longer works. I will just switch to Safari.
Many thanks.
Charles
Charles Deister
(503) 949-5762
[email protected]<applewebdata://81CB4171-226F-49DF-BD59-A38A7360B3FB/[email protected]>
PO Box 5032
Salem, OR 97304
http://www.pilotstrat.com<http://www.pilotstrat.com/>
This transmission (including any attachments) may contain confidential information, privileged material, or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.

Wireless not working in linux, but works fine in windows vista

Hello!
I have installed Unbreakable Enterprise Linux 4 in a dual boot config. with Window Vista on a Compaq Presario laptop. After install completed I found that my on board Broadcom Wireless Adapter (Dell 1390 Mini PC card) was not recognized. I have tried installing NDISwrapper versions 1.48 and later 1.47 (after uninstalling 1.48) because everytime I got to the "modprobe ndiswrapper" received a fatal error about an unknown symbol or parameter, and on install I also encountered a "CONFIG_4KSTACKS" error as well. The good part is the light on my laptop for the wireless adapter finally came on and the driver (bcmwl5.inf) appears to be installed and the wireless adapter identified as being present, but it still doesn't show up in the network manager gui interface. So I am out of ideas if any one can give me a suggestion for a solution I would appreciate it.

Hi there,,,,,
I have Oracle Enterprise Linux 5 installed and Intel wifi 5100 card installed on my laptop. Wireless card does not work in Linux it works fine with Vista, I have dual boot. I have downloaded and installed the microcode for the wireless card for Linux,,,it is now active but it does not take ip address from dhcp and nor does it connect when i supply manual ip. it does not even scan for any wireless network. I have WEP enabled on my wireless network. It just says disconnected.....
Please help me.....i have been trying to get this thing work for 3 weeks.
thanks.

Why Oracle 8i is not Working with JDK 1.3

Why Oracle 8i is not Working with JDK 1.3 by using JDBC.

try this
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:"somedsn","scott","tiger");
I am using this for Oracle, it is working for me.
Uma
Java Developer
http://www.globalleafs.com

Why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

IE uses a different version of Flash than other browsers use. You need to install the Plugin version of Flash for Firefox.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.

Why do my panels not work in CC 2014

I made my own panels in CC but they don't work in CC 2014. I miss them.

It's the latter. Thank you for answering my question.
Op 21 jun. 2014, om 09:42 heeft Trevor Dennis <[email protected]> het volgende geschreven:
Why do my panels not work in CC 2014
created by Trevor Dennis in Photoshop General Discussion - View the full discussion
Are you talking about a custom workspace, or actual panels made with Configurator? If the former, then go Preferences > Sync settings. If the latter, then those Flash panels no longer work in CC 2014. Check out any of the multiple threads about Extensions being greyed out.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6481073#6481073
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why does my iMessage not work even with my apple ID signed in?

Why does my iMessage not work even with my apple ID signed in?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom
BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

Why does Server Monitor not work with non-Xserves?

Does anyone know why Server Monitor does not work with non-Xserve computers? We acquired a Power Mac for a server, based on there being no apparent difference except for the obvious. Turns out there are some differences after all.
Do Power Macs lack some hardware components or is this just a software thing?

God question, unfortunitly I dont have the answer but I would also like to know why the software only works for X-Serve....Is there any 3rd Party Software that is similar to "Server Monitor"?
Thanks

Why does my imessage not work with only 1 phone number

Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

Why does flash player not work with facebook?

Why does flash player not work with fcebook? Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player. When I go check which version I have, I always get the message that I have the most current one. I run Mozilla Firefox with Windows. I don't know anything else.
Message was edited by: khettich

This means you don't have the latest version installed. Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working. HELP....

I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Problem in SQL with CURSOR( ) ,Why the CURSOR did not work?

hi All:
I have a problem in SQL with CURSOR.
The data is as the attachments.
Here is the SQL statement as follow:
SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
FROM F3102 X
WHERE X.IGDOCO=A.WADOCO
AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
WHERE A.WADOCO='10004'
The statement above returns records as follow:
WADC WADOCO IGCOST DETAIL
WO 10004 A1 CURSOR STATEMENT : 4
CURSOR STATEMENT : 4
IGLITM
1KV90CPG2
1KV90CPG2
1KV90CPG2
But, after I add one statement in the subquery, there is no record returned from CURSOR.
Here is the SQL statement:
SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
FROM F3102 X
WHERE X.IGDOCO=A.WADOCO
AND X.IGCOST=B.IGCOST
AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
WHERE A.WADOCO='10004'
The statement above returns records as follow:
WADC WADOCO IGCOST DETAIL
WO 10004 A1 CURSOR STATEMENT : 4
CURSOR STATEMENT : 4
no rows selected
Why the CURSOR did not work?
The database version is Oracle Database 10g Release 10.2.0.4.0 - 64bit Production.
F3102 DATA:
IGDOCO     IGDCTO     IGLITM     IGCOST
10004     WO     1KV90CPG2      A1
10004     WO     1KV90CPG2      B1
10004     WO     1KV90CPG2      C3
10004     WO     1KV90CPG2      D1
F4801 DATA:
WADCTO     WADOCO
WO     10004
Edited by: user2319139 on 2010/3/2 上午 1:17
Edited by: user2319139 on 2010/3/2 上午 1:20

Why this structure and not a join?
The cursor() function returns a cursor handle that needs to be processed - in other words, the client needs to fetch data from it. The Oracle® Database SQL Reference+ (http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/expressions005.htm#i1035107) describes it as being equivalent to a ref cursor handle.
Thus why are you creating ref cursor handles as a column in a SQL projection - where each row will have a "+nested+" ref cursor handle to process. What problem are you attempting to hack solve this way?

Why my RMI is not Working in Linux???

Similar Messages

Maybe you are looking for