Why no bluetooth in connection manager ?

PC Suite 6.80.22 cannot connect to my phone (6021) via bluetooth.
When I run the Nokia connection manager, I can only choose infrared, serial data cable and usb data cable.
I do not have bluetooth !
When I use the windows explorer, I can make a connection there and I can manage files (upload, remove, download).
So I am sure my bluetooth device (Trust BT120) is installed and working correctly in my OS (Win2k SP4).
In my device manager, the bluetooth device is reported as a lan device.
I already re-installed the pc suite.
My question is : why don't i have bluetooth in the connection manager ?

Are you using a Mac?
If yes the following is irellevant...just incase..
Connecting the Phone to a USB Bluetooth Dongle. Using PC Suite.
Yesterday, I stayed up all night to figure this out. I called nokia support to see what they can do, and apparently the new drivers from Sitecom (the BT adaptor that I use) creates a "Cloak" over the Microsoft ones. (This is only if you have SP2!!)
Required for these steps:
~PC Running Windows XP on Service Pack 2. (how do I know if I have Service pack 1/2? Go to Start > Controll Panel > Classic View (on the top left corner, or if you already are then ignore this) > System. In system it will say which serivce pack you are running.
~PC Suite version 6.80.22 or later.
~Bluetooth Adaptor + Drivers for it
~Nokia Phone supporting a bluetooth In/Out connection.
~Patience (this may take half an hour depending on your PC Spec) (Took me 15 minutes)
So here is what I did:
First of all close all programs that you dont need running.
Start > Controll Panel > Add Remove Programs > Sitecom drivers
Remove ALL Sitecom (or which ever company's you use).
Reboot Computer.
Next put the CD/Floopy in the PC or folder that you downloaded have ready on your desktop, containing the drivers required for your adaptor.
If a autorun comes up cancel it.
Plug in your bluetooth adaptor to a permanent usb port! The port you plug it into will be the only and only port that you can run bluetooth from, dont ask me why. So use a good safe place. (I put mine in the back of my PC, not the front.)
Windows will now say that it has found new hardware. It will ask you if it can search the internet for drivers, click > Yes This Time Only.
It will search and wont find anything.
Now it will ask you if it can search for drivers on the PC, click : Yes, and tell it where the drivers are located, CD/Floppy, Folder. eg: E:\Sitecom/drivers/XP
Let it install. It will finish, then suddenly re-open.
Run the same step as above again. (dont ask me why..it just installes some more drivers.)
Finally it will finish and say that your software is ready to be used.
DONT TRY TO USE IT! THE SOFTWARE REQUIRED ISNT RUNNING YET. DONT RUN PC SUITE EITHER! DONT QUIT PC SUITE, AND DONT TRY TO USE THE CONNECTION MANAGER.
REBOT the PC.
Now when you go into PC Suite > Connection Manager, you should find a new connection. In my case:
Bluetooth (Sitecom)
and the old bluetooth connection looks like this:
Bluetooth (Microsoft)
The connection is very fast and stable. You can browse the phone as if it is cable connected which is awsome. Transfer speed depends on your adaptor, but it averages between 1 - 3 Megabites Per Second.
Hopefully this works for you too!
Good Luck,
Tal
I own a 5210, 5140 and now..the new 3250. Symbian 60 Series OS 3.0 ..just the best.

Similar Messages

:( i cant see bluetooth in connection manager of ...

i have nokia 6630
pc suit version 6.4.8
using unbranded pc
windows 2000 sp4
usb bluetooth dongle adaptor
in device manager it shows ISSC bluetooth device
bluetooth device by IVT corporation
when i open my connection manager, there is no bluetooth connection i can use, but only irda, serial and usb are available.
i dont know what bluetooth stack is, but i cannot see bluetooth icon in the control panel either (like in windows XP).
if i use the software provided with the device, everything works fine, but i cant connect my fone to pc suit, as there is no bluetooth option available.
please help

i thought i had the latest version.
but now i have updated my software versions (both pc suit and blue soleil)
my pc suit now shows bluetooth connection and it also proceeds with searching devices, it also lists my fone in the list. but when i select my fone it asks for the passcode, i entered the passcode in the pc but nothing came on my fone (i mean passcode window).
pc suits gives me the msg that this connection is available and u can now use pc suit to browse .........
but when i try any service of the pc suiut it says no fone connected
what now?????

Why do i get connection Manager invoke failed to find service connection url for my app store

My Ipad can not download any apps today i just get this message but i can open app store no problems on my IMAC

First, those are two different App Stores. The App Store app on your Mac is for the Mac App Store, apps for Macs, apps for OS X. The App Store app on your iPad is for the iTunes App Store, apps for iOS devices.
Many folks are reporting an issue connecting to the iTunes servers with their iPads for updates. I had 9 updates yesterday and had no such issue on my iPad 4. Some have used the work around of going to their Purchases List and updating each individual app that has an update from there.

Why can't i connect to any of my bluetooth devices that i have already paired?

Why can't I connect to any of my Bluetooth devices i have already paired with?

You say "I am paired" but unless you are a Bluetooth device yourself, what device are you trying to send files from? A computer? A mobile phone? If the latter, which one?
To send files Mac to Mac, Bluetooth Sharing needs to be enabled on both Macs in the Sharing system preferences pane.
If you are trying to send files between a Mac and an iOS device via Bluetooth, then that won't work as iOS devices don't have that functionality.

Why can't I connect to my iphone5 with my iPad, Snote2 or another iPhone5 through wifi as a hotspot, only through Bluetooth? My Snote2 can't even find the iphone5 as a hotspot.

Why can't I connect to my iphone5 with my iPad, Snote2 or another iPhone5 through wifi as a hotspot, only through Bluetooth? My Snote2 can't even find the iphone5 as a hotspot, even on Bluetooth.
I've reset, restored and updated everything but no go.

WiFi is preferable for use as a hotspot to Bluetooth.
Have you tried Settings > General > Reset > Reset Network Settings?
If you have and it didn't work I would take the iPhone in for service.

Why can't I connect to samsung or htc device via Bluetooth?

Why can't I connect to samsung or htc device via Bluetooth? or can't copy any picture or song from my laptop to Iphone 5?

Because this has never been a feature of iphone/ipad/ipod touch.
Ipod touch/iphone/ipad support bluetooth for handsfree telephone devices, stereo speakers/headsets, some keyboards, some peer-to-peer apps form the app store, and internet tethering where provided by the carrrier.
Otherwise, they will not connect to another phone/device/computer.

Any ideas why iPhone 6 cannot connect to bluetooth in my new 2015 Nissan Altima.

Any ideas why iPhone 6 cannot connect to bluetooth in my new 2015 Nissan Altima.
Thank you.

To be honest, if you do a search of the forum, you will find a number of posts with problems with the 2015 Nissan Altima. It appears that it cannot pair. This seems to be a problem with the vehicle itself and users have been contacting the manufacturer for updates to the vehicle's system in hopes of correcting this. I suggest you contact your dealer and ask if he has any info from Nissan. They will probably try to get rid of you by saying it is a phone problem, but as I said earlier, there are multiple posts here about issues with the Altima.

My Firefox icon will not connect to the internet without manually opening my connection manager first. Why? How do I fix this issue?

I installed Firefox on our home computer this weekend (Dell). This is the browser that I use at work and I'm very happy with it.
Since installing I always have to manually open our connection manager to go online. I can't just click on the Firefox icon and have the connection manager automatically come up.
I have already checked the "no proxy" box as suggested. Firefox is set as our default browser.
Internet Explorer was our previous browser and it was so slow, but at least it automatically brought up my connection manager.

Used iTunes to download 6.1.2 to the iPad Mini. It then worked for (app store and all) for 3 hours. Then wifi stopped working at all. Hurray!

TS1424 Message saying...Connection Manager invoke failed to find service connection URL why?

When I go to sign in it iTunes a message comes up stating: Connection Manager::invoke::Failed to find service connection url. Does anyone know what this means and how to fix this issue?

Check over on the right side of the thread here under More Like This. Look for one that has a green checkmark which means it is answered. I have read of this however, I do not know how to solve it. It seems as though it is one particular carrier this happens to.

Excel Connection Manager suddenly can no longer connect to Excel from SSIS package

During the last 3 months, I used 32 bit SSIS 2008 (v 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results (reports) to an excel spreadsheet. Each report is written to a different
tabbed sheet in the same spreadsheet. The package was working just fine until May 9 2013, when suddenly every single Data Flow task with an Excel Destination displayed error icons and raised the following
error message when opening the Advanced Editor:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at <DataFlow task name>: SSIS
error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager <Excel connection Manager> failed with error code 0xC0202009. There may be error messages posted before this with more
information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)Originally the error message reported that the Error Code was "0x8000FFFF", but I can't seem
to reproduce that error code since. Now I am only getting the above error message.From the time I created the original package (when it worked fine) until now, I have been using the same computer, writing to a (32 bit) 2010 Excel file in
a local folder. The filename and location have not changed. The ConnectionString has not changed. The Connnection String I am using is Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion Results_dt01.xlsx;Extended Properties="EXCEL
12.0 XML;HDR=YES;". Now an attempt to create and test a NEW Connection Manager yields me this error. "Test connection failed because of an error in initializing provider. Unspecified error.",  whereas before I had
no problems creating a new connection manager.I checked a second SSIS package, which I also built during the past 3 months, which loads multiple sheets from multiple Excel files to a SQL Server 2008 database holding table. It uses the same
ACE OLE DB 12.0 connection to load the Excel speadsheets and this package continues to work fine on the same workstation.In desparation, wondering if the Microsoft ACE OLE DB 12.0 driver had become corrupt (even though the second package
was raising no errors), I did download and install the Microsoft ACE OLE DB 12.0 driver.  That did not solve my problems with the first package.I need to get this package running again ASAP as it is targeted for UAT testing in a
matter of days. Any help with this issue would be greatly appreciated!

I submitted this issue above and now I am having the same problem again. I am using the same local computer, the same operating system (WinXp v 5.1.2600 SP3 Build 2600) as originally described. I am working with the same SSIS package that
writes multiple query results (reports) to an excel spreadsheet. This package has been successfully executed multiple times, but now I am suddenly getting the same error as follows:
Error at 1ConversionContacts [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Error at DFlow Write soft deleted duplicate claims to Excel sheet [Excel Destination - write duplicate claim nbrs that have been removed to Excel [61]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
The package will not run because of these multiple errors (multiple because it occurs on every single excel destination in the package).
I have Run64BitRuntime set to false on the project. I have triple checked that the excel file name (which I created and can access) exists with the correct name in the correct path, which is local on my machine. The file is the same file in the same
location as when the package worked. I am running the SSIS service under my own network login, as I was when the package worked. I have been consistently getting this same error whenever I change my network password without updating the password
in the SSIS service, but I have triple verified that the service is using my latest password. If I try to open and edit the Excel Destination in any DataFlow task I get the same error. I can successfully create a new Excel Connection Manager pointing
to the same excel file. However if I try to assign the newly created Excel Connection Manager in the data flow, I cannot activate the drop down to choose the Excel sheet without getting an 'Unspecified error' message. I then swapped out
the file with its template version, and ensured the name was updated as correct. I still get the same errors.
Oh, and the SSIS package is extracting data from a SQL Server 2008 database with an ADO.net Connection Manager using Windows authentication. I have no problems with the SQL Server connection, it has always worked and still does. It is only
the connection to excel output file which is locally stored on my machine.
Has anyone got any suggestions for me?

USB no longer available in Connection Manager afte...

Hi! I had the Init MediaControl2 problem, which I managed to fix after running through numerous reinstallations and cleaning (with the Nokia registry cleaner 3.3)
However I found that even though the PC suite is now installed, the USB is no longer shown as one of the options under Connection Manager. Also I found that there is no 'Nokia Connectivity Cable Driver' installed (checking the Add/Remove Program). I have only
Nokia PC Suite
Nokia Connectivity Solution
Tried to reinstall many times but never get Nokia Connectivity Cable Driver back. Here's what I've done so far
- Repair
- Used all options under Nokia Cleaner 3.3 - Deleted all registry entries that contain the word "PCSuite" or "Nokia" by using some registry management tools
- Reinstalled PCS 6.7, and updated to 6.8
- Used the regsrv32 on the dll that manages the USB connection - C:\Program Files\Common Files\PCSuite\Transports\NCLUSBMM.dll, but returned error 0x8040020
- Tried to install older version of USB cable driver 1.59 but the installer said there's new version
- Tried to reinstall the current "Nokia Connectivity Cable Driver" by taking the installer from other good PC, but it said PC configuration corrupted, contact nokia support
I'm very frustrated with this problem.. it took me 5 hours yesterday to work till 3am and it has still no cure! What I need is simple, a way to remove EVERYTHING by PC Suite, and have a clean installation which I can use the USB connection. I know I could use Bluetooth, but I just don't want to give in to this problem.
My PC Specs
Operating system:
Microsoft Windows XP Build 2600 Service Pack 2
Language: English (United States)
Nokia PC Suite: Version 6.80.20
Language: English
Connectivity Cable Drivers: Unable to install!

Apple has never fully committed support of the Time Machine/Airport Extreme combination. I have a Airport Extreme 6th gen that supposedly supports the Time Machine, (page 13 of the installation manual). After a year of experience I have concluded that it does not work - period. If you have any critical data on your system(s) I would recommend that you use a dedicated backup/recovery product like Carbon Copy Cloner.

Problem with Connection Manager. Can't change connection string / Server name

p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin-top:0cm;margin-right:0cm;margin-bottom:10.0pt;margin-left:0cm;line-height:115%;font-size:11.0pt;font-family:'Calibri','sans-serif';}
.MsoChpDefault
{font-size:10.0pt;}
.MsoPapDefault
{line-height:115%;}
@page Section1
{size:612.0pt 792.0pt;margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
Hi,
I have copied a number of SSID packages from a live server to my test server and am trying to get them up and running but I have a problem with the connection. The only thing that is different is the server name. I decided to keep the same connection in the connection manager as it is referenced in a dtsConfig file. I changed the dtsConfig file to reference the new servername [Data Source= new test server name]. I also check my paths and they are pointing to the correct config locations etc.
I found this post which was similar to my problem but I still get problems with the connection
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1319961&SiteID=1
I updated the connection by changing the server name in the actual connection. I did this from the data flow tab in the Connection Managers sections (MS Visual Studio). Right clicked - Edit - changed the name of the server name to my test server and selected the database. Test connection was fine, and saved this.
Once I saved this, the connection string changed to my current test server in the properties of the connection. However when I run the package I get the following error:
Error: 0xC0202009 at ReportsImport, Connection manager "myconnectionstring": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Error: 0xC020801C at Myprocess import from file, BuyAtReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionstring" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Myprocess import from file, DTS.Pipeline: component "ReportsImport" (79) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Myprocess import from file, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Myprocess import from file: There were errors during task validation.
So even if I change the existing connection properties and save and Build my package again, my connection properties (connectionstring, servername etc) all revert back to its original data source when I re-open the package. Simply it does not seem to be saving the connection properties i put in.
What am I doing wrong or how can I change the existing connection manager to look at the new server. The database is the same and I have full admin privilege on the server.
I don't want to recreate my packages as there are alot and they are not simple.
After changing the connection properties, saving and reloading I get a connection error. But this is because it is not retaining the new connection manger setting i entered.
Incidentally - I created a new SSID to perform a simple connection and write to the the server and it was OK so there is no problem with actually seeing the my test server.
Thanks in advance

Yes, the package is in visual studio and I have executed it. There are no errors but in the output i have the error message about my connection. My dtsConfig file is added to the project in the 'Package Configuration Organizer' and path and files are correct. This is the output error:
Error: 0xC020801C at xx import from file, xxReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionname" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I will try and run it using dtexec.exe. if I have two config files do i use
dtsexec.exe /f <packagename> /conf <configfile> /conf <secondconfigfile>

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

AcquireConnection method call to the connection manager Excel connection Manager failed

I used VS Studio 2008 (BIDS version 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results to different tabbed sheets of a single excel spreadsheet. The package was working just fine and has run
successfully multiple times, but all of a sudden when opening the project, every single Data Flow task with an Excel Connection Manager displayed error icons. Each raises the following error message when attempting to open the Advanced Editor:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at DataFlow task name: SSIS error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
call to the connection manager Excel connection Manager failed with error code 0xC0202009. There may be error messages posted before this with more information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)
From the time I created the original package (when it worked fine) until now:
1) I have been using the same computer, the same login account and the same permissions.
2) I have been writing to the same (32 bit) 2010 Excel file (which I created) in a folder on my local machine.
3) The filename and location have not changed; a template file is used each time to move and overwrite the previous file. Both are in the same locations.
4) I can independently open the target Excel file and the template Excel files with no errors.
6) The ConnectionString has not changed. The Connnection String I am using is
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion\Results_dt01.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;".
7) Run64BitRuntime is set to False.
8) Delay Validation is set to true
9) This is not running under a SQL job
10) There are no child packages being run
I CAN create a NEW Excel Connection Manager, assigning it the exact same target Excel spreadsheet, successfully, but when I attempt to assign it to the Data Flow destination this error occurs:
"Test connection failed because of an error in initializing provider. Unspecified error."
Thinking that the driver might be corrupt, I opened a second SSIS package, which also uses the Excel Connection Manager (same driver) and this package continues to work fine on the same workstation with no errors.
I have searched online for causes of this error for many hours and found nothing that helps me to solve this issue.
Does anyone have any suggestions for me?

Yes, I have verified that the Excel file is not in use or opened by anyone, including me. It has been two months since I opened this particular package, although I have been working with other packages in this project. I just discovered that another
package in the same project has the same problem - all Data Flows that output to an Excel Destination now have the same error icons. This second packages outputs to an entirely different Excel file than in the first package. A summay:
Package #1 has error on every Excel Destination and uses templateA to overwrite fileA and then writes to fileA
Package #2 has error on every Excel Desintation and uses templateB to overwrite fileB and then writes to fileB
Package #3 has no error on any Excel Destination and is linked to multiple files (none are A or B)
Package #1 and #2 are in the same project, but Package #3 is in a separate project .
I will try replacing the Excel files with new ones for Package 1 and 2.

Sql server agent job failing to connect excel connection manager of SSIS package by 32-bit mode run time

I am unable to succeed with sql agent job, I am trying to execute the SSIS package through sql agent job by ticking 32 bit runtime check box in 64 bit machine , even it does not worked..
could any one helpme on this?
Source: Excel Load Connection manager "Excel Connection Manager"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class
not registered". End Error TS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error
messages posted before this with more information on why the AcquireConnection method call failed. End... The package execution fa... The step failed.

Hello Keerthi,
Can you please modify settings and set delay validation for Excel connection manager? I think its validating connection and failing because it might be picking that from some variable.
Alternatively, please run package using below and see what happens.
EXEC master..xp_cmdshell 'DTEXEC.exe /SQL "Folder\Package" /SERVER Servername'
I will recommend you to follow steps in below link.
http://www.sqlhammer.com/blog/running-ssis-packages-in-32-bit/
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Why no bluetooth in connection manager ?

Similar Messages

Maybe you are looking for