Why planned revenues is being changed because of credit block on sales orde

HI,
when project is blocked because of credit limit the planned revenue disappears from the project. Planned revenues should not be blocked at all, when the project is created. Planned revenues should not be changed because of credit limit. Now the planned revenues disappear from the project when customer is blocked due to credit limit. This is not correct. Planned revenues should only be changed if billing plan is changed.
Planned revenues for project is updated only when the sales order is released from the credit block. However if the sales order is blocked due to the credit limit again and planned revenues disappears. When we release the sales order, planned revenues is updated again. This should not happen. Once it is updated it has to remain on the project.
Kindly help if anyone knows.

Hi Vishal,
If you make price change in sale order and customer falls under credit category that will impose credit block.
Moreover if you are changing price in sale order that will also affect your billing plan accordingly.
Since plan revenue is coming from pricing in sale order that means it should also get update.
lets wait for other post also, we may come to know other possiblities as wel.
Regards
Abhinay Gautam

Similar Messages

How to block planned order when there is a credit block in sales order

Hi Experts,
Planned order should not be created when there is a credit block at sales order level. Can someone help me in solving this?
Expecting for your valuable comments.
Regards,
JANA

Go to t.code OVB8 and add routine 101 under routine column and routine 1 under system routine column and then create new document and test.
Regards,

Any Change in PR00 should block the sales order

Dear All,
i have a requirement that whenever anyone changes the price(PR00) in the sales order, it should be blocked. Basically we want to control any price changes at order level.
Can someone please suggest any other option how to control the same....
Thanx in advance...

Hi
One of the option is to handle the requirement using user exits. Since the value can be changed manually during create and change of sales order, the logic should be different for the two scenarios.
During create(VA01), if the value for the field KOMV-KHERK (Condition Origin) is 'C-Manually entered' then the document should be blocked. You can see this field in the sales order by selecting the condition and click on the blue lens. This option is not useful for VA02 because this field will always have C and every time when the order is saved from VA02, the order will be blocked.
During sales order change (VA02), the system should check the current value of PR00 and the value exisitng in the table KONV (passing the document condition number) and if there is a difference, then the document should be blocked.
This is one of the alternative. You can also find a better field that can handle both the scenarios.
Thanks,
Ravi

Why is the dictionary being changed to a language I don't want?

Despite having right clicked the dictionary of my choice it appears Firefox is automatically changed the dictionary from one language to another, it is using a dictionary contrary to the wishes of my precious setting. Is this a new feature to piss people off? I have just upgraded FF, before the upgrade I never had this problem, The dictionary I wanted always stayed selected.
#fail

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes the see:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved

Why are my settings being changed when I bounce?

I'm trying to bounce files from a Finale playback and everytime I bounce, all the panning and mixing changes I made return to their default setting.

POP or IMAP? If IMAP, have you checked what appears on the server, via your email provider's website? Are the missing messages visible there?
You may have inadvertently selected a setting that shows only unread messages, so when you come back to Thunderbird they are hidden after having been read. Check you have View|Folders|All, and that the Read selector in the QuickFilter toolbar is de-selected.

Subscription,Billing Plan,Revenue Recognition and how to use Credit Memos?

We have setup in our system the above, but not sure how to setup corrections of subscriptions invoices which are billed in advance using RR.
Does anybody have any pointers or suggestions of what would be the best solution?
We are using 5 different sales documenttypes (contracts) for subscriptions which we invoice using invoice type FV, 3 which we are using RR. We are also using BOM in this sales documenttypes.
Kind regards

@quahsweekoon1
You can cancel recurring payments as shown in this guide: https://support.skype.com/faq/FA1881/
In case recurring payment already went through then you would need to contact customer service. They will check your account and if you are eligible they can issue the refund for the payment.
In order to contact customer service you will need to follow this link: http://www.skype.com/go/support.login
Here's also a guide: https://support.skype.com/faq/FA1170
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Credit block in Sales order create/change

Hi Experts,
while creation/change of sales order,If sales order net value is zero or 0.01 no credit checks.in other words greater than 0.01 netvalue of so, it shoud undergo credit checks.( Means Header->Status, Credit status = 'Not Approved". )
Actually i am trying to write logic in routine 901 ( include RVKMP901).but i am unable to reach the requirment.Can anybody how i can reach above requirment.
Regards
Jaya Reddy

Hello,
you could use code similar to this:
CHECK: xvbak-netwr < ls_zkredit-wert.
else no credit check
vbap-cmpnt = ' '.
MOVE charx TO bypass-security.
MOVE charx TO bypass-static_limit.
MOVE charx TO bypass-dynamic_limit.
MOVE charx TO bypass-documentvalue.
MOVE charx TO bypass-critical_fields.
MOVE charx TO bypass-reviewdate.
MOVE charx TO bypass-open_items.
MOVE charx TO bypass-oldest_op.
MOVE charx TO bypass-dunning_level.
MOVE charx TO bypass-user1.
MOVE charx TO bypass-user2.
MOVE charx TO bypass-user3.
The ls_credit-wert is a local field which is set from a table according to Sales order Type/ Salesorg/ Payment-condition
Regards Wolfgang

Field Values being changed in the flat file on Application Server

Hi All,
I am loading a flat file(.CSV) from Application server. The file has some characteristic fields, for ex: CNUM of type Char, length 20. But it has got the value which is of 10 char length, say XYZ1234XAB. When I load the same fiel from client workstation, the load was successful but when I load it from Application server, the load has failed and the error is Invalid/Hex. characteristics for this record and many such records.
When I checked the file on the application server the value 'XYZ1234XAB' is being displayed as 'XYZ1234XAB   #' and it is also being loaded with '#'. This is the cause of the error.
Why is the value being changed on the application server? What can I do to overcome this?
Thanks,
RPK.
Message was edited by:
        RPK

Hi Ganesh,
I have already loaded data to my ODS and when activating it is giving error "Value 'XYZ123XABC   #' (hex. '123456....') of characteristic CNUM contains invalid chara".
I also have some lower case char in some of the records for the same field. The file is huge and cannot change the file, infact I have many such files. Is there any other way to overcome this?
Thanks,
RPK

The type of this column cannot be changed because it is currently being indexed

Hi,
We have a custom library with some columns defined. This library we have saved as a template and then trying to create a library using the template. When we try creating the new library using the template we get the following error:
The type of this column cannot be changed because it is currently being indexed.
We are not trying to change any column type just creating a new library using the template. The existing library does have a couple of indexes specified. Removing a index that is applied on a column of choice data type (drop down selection) seems to work.
However, would like to know why this is an issue with the index?
Although this is perfectly supported. Checked, this does not happen when I try with a new library with a choice data type and index applied on that library, it creates the template and then a new library correctly. So, what's going wrong with my earlier
library?

Hi Croute,
I had checked that thread earlier and tried the Managed Metadata Service Application solution. However does not help in my case. I still get the error.
Also, just to cross-check we created a new library from scratch and added choice column and applied index on this column. Saved this as template and created a new library using this template. It works fine without the error. So not sure what is wrong with
the earlier library and list template that gives the error
The type of this column cannot be changed because it is currently being indexed.
Also, note even after giving this error the library is created with all the columns and indexes. But we need to provide a reason for the error above.

WHY DO I NEED TO CHANGE DATA PLAN IN ORDER TO GET A NEW PHONE?

WHY DO I NEED TO CHANGE PLAN IN ORDER TO GET A NEW PHONE FOR A CHEAPER PRICE ?

You do not like the answer that is different then you being wrong. Everyone can think things about anything, but it is a black and white issue. To get a new cheaper phone, then you would have to change your plan.
<<Personal comments removed to comply with Verizon Wireless Terms of Service >>

HT5622 Why I'm I being asked to change my password

Why do I keep being asked to change my password?

Hi Again cor-el,
I now understand the reason behind the green lock icon, it is for a extra level of security with sensitive sites, which this particular site is. 
Having said that, if I follow the instructions, and "temporarily remove autocomplete=off", when I load the site in the future, is the situation going to be: when I load the site it will automatically have already loaded my user and password, so I don't have to do that function? If so, I really don't want that to happen. 
With my old computer, when I clicked the bookmark for the site, and entered the site, I just had to click on my user name and firefox entered my user and password. Evidently, firefox remembered those parameters for that site, and all was well. Definitely made that procedure easier. 
By doing the procedure in autocomplete=off, will this happen? Or, will the situation be, when I click on the bookmark and load the site, both my user and password will be automatically entered? If that were to occur, I would be giving up too much security for that site. 
I just would like my new computer and firefox, to enter that web site (scottrade) like it did before, where all I had to do was click on my user and enter the first character of my user and firefox filled in the of my user and password. Thank you, cor-el.

Why are my emails being sent as "Apple Inc" and how do I change it?

Why are my emails being sent as "Apple Inc" and how do I change it?

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Error while uploading plan revenue -CJR2

Hi All,
I am facing one issue while uploading Plan revenue for wbs elements using excel method for CJR2 transaction. What i m doing is , in project structure i have 1st , 2nd & 3rd level WBSe, 2nd level WBSe is relevant for billing and revenue planning. Therefore i have marked 2nd level WBSe as a billing element and to restrict revenue plan i have maintained a relevant user status at 1st and 3rd level WBSe. In upload file i am only giving 2nd level WBSe but when i execute i am getting an error that user status XXXX is set on 1st level & 3rd level WBSe which restrict revenue planning. I also removed 'Bottom up planning" indicator from planning profile.
My reason of worry is even though i have not maintained 1st and 2nd level WBSe in upload file then why and how system is checking 1st and 2nd level WBSe .
Any clue is highly appreciated.
Thanks.

Hi Varun,
In my query i have mentioned that user status is set on 1st & 3nd level WBSE only and i am doing revenue planning on 2nd level WBSE( to this WBSE there is no user status ). And i am mentioning 2nd level WBSE only in upload file but system is checking 1st and 3rd level WBSE and giving error and this is my point of worry. It should not look for 1st and 3rd level WBSE. And i do not want to change the user status at 1st and 3rd level WBSE.
Thanks

Photos Being Changed in External Application: Dropbox?

I was having an issue where each time I would modify a photo, LR would change the Capture Date to the Modified Date. Upon a quick search, I believe the correct way to stop this from happening is for me to uncheck the auto write to XMP which I did. After correcting the myriad of inadvertent date changes, I selected all the photos I was working with and attempted to save the metadata only to get this warning/question: "One or more of these photos has been changed in an external application. Should Lightroom overwrite the settings on disk?" I searched this and I'm confused because I'm not editing the photos in an external application; the only external app that is even remotely touching these photos is Dropbox, which is where my LR catalog is stored. Does Dropbox have something to do with this message or am I missing something? To overwrite or not to overwrite is the question now, I guess, but I'd like to figure out why this question is being posed so I can fix it from the start.

If I didn't think my humor and irony would be misinterpreted as being rude, I might say "Why are you such a troublemaker, by asking this question? Don't you know from reading the forum, that there are multiple opinions about how LR works with changes done outside itself?" Ooops, I actually said it.<G>
But, seriously, I've had many of the same questions, so I've been following the various threads, and still haven't got a clear and relatively simple answer to "how to work with LR images and catalogs using outside applications, and not mess stuff up?"
So, again, seriously, thanks for asking. Hoping, like you, to get clearer understanding.
Regards,
Peter
Peter Gold
KnowHow ProServices
Seeking Serenity wrote:
I was having an issue where each time I would modify a photo, LR would change the Capture Date to the Modified Date. Upon a quick search, I believe the correct way to stop this from happening is for me to uncheck the auto write to XMP which I did. After correcting the myriad of inadvertent date changes, I selected all the photos I was working with and attempted to save the metadata only to get this warning/question: "One or more of these photos has been changed in an external application. Should Lightroom overwrite the settings on disk?" I searched this and I'm confused because I'm not editing the photos in an external application; the only external app that is even remotely touching these photos is Dropbox, which is where my LR catalog is stored. Does Dropbox have something to do with this message or am I missing something? To overwrite or not to overwrite is the question now, I guess, but I'd like to figure out why this question is being posed so I can fix it from the start.

Income recognition based on revised planned revenue

Hi,
I am facing a critical issue on PS Results Analysis and I though you can only help me, because you have worked extensively on CO side.
The client is using POC based Results Analysis and using ''Planned Revenue'' as basis of Income recognition in each perod. But two years after runnng Results analysis, they want to callculate Income recognition based on Revised Planned Revenue, instead of original Plan revenue.
When i changed the method Overall Plan from E to F in OKG3>Planned values screen, it is picking up the Revised Planned Revenue in KKA2 (Results Analysis screen) but the Periodic Profit is still calculated based on the Original Plan Revenue.
When we raise the issue with SAP they have advised, we need to define Line ID's for Revenue in OKG3>Expert mode>Planned values sub screen.
When the Planned Revenue is reduced the value is not postng to any GL element, where as the original Planned revenue is posted to Primary GL elements whiich i can see in RPSCO table .
Can you plesae advise on how to bring unassinged revenues (i.e.reducued revenue) in RPSCO table into Results analysis valuation, so that the reduction in Revenue wiill be consdered in Revenue recogniiton.
It would be really great if someone can advise on ths
thanks
Bala

Hello,
The Best Practices document alongwith the scenarios supported in standard SAP is available as an attachment in the Note 1172799.
Regards,
Raghavendra YN

Why planned revenues is being changed because of credit block on sales orde

Similar Messages

Maybe you are looking for