Why Portage R700-15P starts automatically after hibernation

Why TOSHIBA Portage R700-15P starts automatically after I hibernate it (or put on sleep) and close the lid?
As soon as I take hibernated laptop with closed lid in my hands to put it into bag - it starts by itself with closed lid...
Had anybody similar issue and solution for this?
Thanks

> Is there any setting for laptop or Windows 7 that does not resumes laptop from hibernate/sleep state when lid is closed?
First of all its not matter if the lid is closed or not one fact is important: notebook is set in hibernation mode and wakes up if USB mouse would be moved
Fact is that BIOS contains some Wake Up options you should check the BIOS settings like Wake Up on LAN, Wake up on keyboard etc disable these options, save the changes and check how it works

Similar Messages

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Option that SAP starts automaticly after power loss

I am using an windows/sql ECC 6.0 server. I would like option that SAP starts automaticly after power loss. Is it possible and how?

Hi
I think this not possible.
Thanks
Pankaj Kumar

Will DB start automatically after rebooting the computer?

Will DB start automatically after rebooting the computer?

user9947478 wrote:
Will DB start automatically after rebooting the computer?Yes. IF you set it up to do so. Or you have an OSs for which it is installed to automatically do so and you have not disabled it.
I assume, since it seems to be difficult for you to tell us what operating system you use, that you use some form of Windows. In which case, the answer is 'Yes, automatically set up - as seen by the Services'.
(Windows users don't seem to realize there are other OSs and therefore don't tell. They also don't realize that Windows is not an OS, but rather the marketing label for a whole families of OS Editions. Some popular families are: Windows XP, WIndows 2003, Windows 2008, Windows 7. But even then, Oracle only works on specific Editions within the family.)

Hyper-V - virtual machines don't start automatically after power outage

Hi,
I have a HP server running Windows 2012 R2 + Hyper-V. On this server, four VM have Windows Server 2003 R2, and one VM has Windows 2012. After power outage, 1 2003 R2 VM and 1 2012 VM are started properly, but the other three machines aren't. I've started
it manually. All VM's have last version of Hyper-V integration tools installed, the option "Automatically start VM if it was running before the service was stopped" was chosen. I'm not very familiar with Hyper-V, so, I've investigated only Hyper-V-VMMS
event log. There are some recurring errors:
The Integration Services Setup Disk image could not be updated: The process cannot access the file because it is being used by another process. (0x80070020).
and
Failed to get the disk information.
But I think it isn't a clue.
How can I clarify, why these machines aren't started automatically?

Hi EugenBerend,
Maybe it is related to system resources allocation during the start up .
I would suggest you to configure a startup delay for those lower priority machines so that system
can locate enough resource for them.
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Listener service not start automatically after reboot in Win2K server Clust

Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.

The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez

Messaging Server/UNIX: Starts automatically after installation

How can I configure Messaging Server to run automatically on startup?

In most cases, Messaging Server for UNIX will run at startup automatically.

Most UNIX systems have a start script that includes a line that starts sendmail
as a server (/usr/lib/sendmail -bd) automatically.
Howver, when Messaging Server is installed, it replaces several mail utilities (mailq,
processq, and sendmail), with links to our sendmail binary
(<ServerRoot>/bin/msg/admin/bin/sendmail).
Therefore, Messaging Server, rather than sendmail, starts when
your system starts.

This can be confusing to administrators of other Netscape servers since
most other Netscape servers are not installed to start automatically.

Note:

This does not take effect until the system is fully restarted. After
installing Messaging Server, restart the system before attempting to start
Messaging Server. Sendmail is usually already running, and the installer does
not kill the sendmail process.

If you start Messaging Server without
restarting, smtpd will not start due to a port conflict.

Hi Leo, thank you for your help
This:
I have tried the suggestion above (clear the "Run task as soon as possible after a scheduled start is missed" checkbox) and it does the trick for me. However on the Home/Get Started/Set up screen the "Set up Server Backup" task is then reset to outstanding
while the .../Quick Status screen shows "Server Backup ON".
Is a working work around till a real update or hotfix is released

Ovs-agent starts automatically after reboot but hostname isnt resolvable

Hello Guys,
the theme is the problem. After rebooting a server the ovs-agent starts automatically but the DNS-Name of the SR isnt resolvable.
If I restart the agent by hand everything works fine. I checked the /etc/init.d, where its installed and the rc3.d. ovs-agent got S99 - which means, it starts last.
But which service is responsible for DNS? In my eyes the only thing that must be up, is networking, isnt it?
Do you have any hints for me?
Greetz

Please check your /etc/hosts and make sure that the hostname is on a separate line and not mapped to 127.0.0.1

PC Suite not starting automatically after re-boot.

Running the latest version of PC Suite in 32bit Vista. Every time I re-boot my PC, PC Suite refuses to start automatically, and there is no icon in the tray. I have to go into start, programs, etc..,then 'click to connect a phone' every time. Very annoying!
Very strange behaviour, given the fact that my laptop (running XP Pro), starts up with PC suite in the tray and connects with my phone via bluetooth without any intervention whatsoever.
Anyone experienced or solved this problem?
Jimmy.

In the start up tab of system config, there is no 'launch application' listed. However, PC suite is listed and enabled.
An update on this problem: Having looked at various previous posts, it would appear that ATI Catalyst Control Centre conflicts with the start-up of PC Suite. I have uninstalled this app, and all would now seem to be well. I beleive ATI CCC causes quite a few problems with Nokia software judging by problems other posters are having..
Jimmy.

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

J2EE process in SAPMMC do not start automatically after a restart

Hello All,
I have a Netweaver with only J2EE engine set up.
Whenever I restart the server, the services at SAPMMC->Console Root-> SAP Systems-> Instance-> Process List,Current Status, Open Alerts, J2EE Process Table do not start automatically.
I have to start them manually.
Please let me know what configuration I need to make them automatic.
Thanks
Raman

Hi,
Please confirm that J2ee is failing to start when you restart the server. If yes do post the logs so that we can drill to the max extent.
Rgds
Radhakrishna D S
Edited by: Radhakrishna D S on Sep 8, 2008 8:17 AM
Edited by: Radhakrishna D S on Sep 8, 2008 8:18 AM
Edited by: Radhakrishna D S on Sep 8, 2008 8:19 AM

Need Database to be started automatically after restarting the system

I m using oracle 8.1.6 on windows 2000. My company wants me to automate the database i.e whenever the system is restarted then the database should also start automatically.
Do any one have any solution for this?....

Action :
Begin by logging on as Administrator. This will give you access to all the Services available in Windows 2000. To load the Services Utility, click on Start, Settings, Control Panel, Administrative Tools, then Services (You may also be able to access it via Start, Programs, Administrative Tools, Services if you enabled Administrative Tools to be displayed on the Start Menu).
Then double click on OracleService<sid> and change the startup type to Auto.
Mudassir

IPhoto 6 starts automatically after reboot, how to avoid ?

Every time I reboot my Imac, Iphoto starts automatically.
It is not active in Accounts / Login Items
Also no camera is attached to the computer; The settings for ImageCapture are to launch EOS Utility if a camera would be attached.
Any clues ?
Thanks,

Xinram
Right click on the iPhoto icon in the Dock, see if 'Open at Log in' is checked.
Do you have a FAT format disk or USB flash drive connected to the Mac?
Regards
TD

Application does not start automatically after J2EE restart

Hi,
Is there a way to automatically start the deployed applications after a J2EE restart. We have a .ear file which we have to redeploy everytime we restart the J2EE engine. We are on 6.40 SP15.
Regards,
Parvez

Hi Parvez and Ivaylo,
Has any of you used the startup mode setting? I tried using it and set it to always but the application still won't start. Is there anything I'm missing?
My application-j2ee-engine.xml looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
 <provider-name>nexeninc.com</provider-name>
 <fail-over-enable
 mode="disable"/>
 <start-up
 mode="always"/>
</application-j2ee-engine>

Why does my Macbook Pro destabilize after hibernation sleep?

Over the last several months using Mountain Lion, I decided to completely drain my battery to reset it. I think it then goes into what is called hibernation or emergency sleep mode. I am usually unable to wake it from sleep prompting a forced resstart.
to restart, I connect the adapter and the light goes green quickly changing to amber as expected. After the restart, however, some top menu items are missing such as the wi-fi icon and the Lock Keychain icon. All third party icons display correctkly. The space is there but blank and I can access the pulldown menu by clicking in those blank areas.. When double clicking the HD icon in the Finder, no icons show on the left side any more. A restart does not fix the problem. The system then eventually destabilizes to the point that I have to restore from my Firewire external HD clone using SuperDuper. One time I did a full restore (that takes forever even with a very fast wi-fi set up) to fix the problem.
I am usually in Safari or playing a Game such as a third party card game application to pass the time until the battery completely drains. I also have Filevault enabled.
Why is the MacBook Pro battery reset causing this OS instability? How can I reset the battery without encountering these sleep issues?

Thank you Dale.
This article mentions that recalibration should be done every two months. I think I waited 4-6 months before doing a recalibration on purpose. Though I probably ran out the battery power before then recharging overnight (some commenters on Apple Discussions said to wait 5 hours before recharging!).
I think that my battery goes into a forced shutdown rather than true sleep. Your linked thread states that this often causes directory damage. But I ran DiskWarrior and Disk Utility immediately after the stated problems occurred. And these programs pretty much repair any directory damage. But they failed to correct the problems I listed in my original post.
So I question the conclusion that not calibrating every two months caused irreparable directory damage that even DiskWarrior or Disk Utility cannot repair. The damage appears more extensive than this in my opinion.
The battery is only a year old with 92.35% of its original current capacity and 537 cycles. The current charge is over 6350 at 99.47%. It will eventually go to 100%. I can run over 4 hours of normal usage on a single battery charge.
Side note -- to my knowledge, nothing in the original MacBook Pro manual suggests that the battery requires regular recalibration of any kind to maintain the integrity of the battery. Much less every two months. If this is a requirement or even highly recommended, then Apple has done a good job hiding this information. And the available recalibration information varies from one type of battery to the next and is often inconsistent.
Apple's comments in the past support the idea that recalibration improves efficiency and fixes some battery issues as they occur, but that it is not manditory to maintain the health of the battery.
Do you have an official battery recalibration source (preferably Apple) that indicates regular battery recalibration is crucial and exactly how this must be done for MacBooks with builtin batteries?

Why Portage R700-15P starts automatically after hibernation

Similar Messages

Maybe you are looking for