Why ports do not open on Airport Express 2nd generation ?
Hi all,
Here is my setup at home.
Quick explanation, this is to avoid the limitation of 2 simultaneous PPPoE by my ISP.
We are connected over fiber @200Mbps so there are no issue whatsoever when everything is connected at the same time.
My problem is well known but nobody has found a solution so far: I cannot Remote Play the PS4 over the Internet with the PSVita.
I tried to open UDP/TCP ports on the Airport as mentioned here:
http://manuals.playstation.net/document/en/psvita/ps4link/viainternet.html
and I got port 9295 opened (looks ok when I check with www.canyouseeme.org), but I cannot open ports 9296 and 9297
The PS4 does turn on when I launched the PS4 Link app on the PSVita, so I guess the connections is made at some point but I cannot get the stream back from the PS4 (The PSVita is connected to a Wifi network @50Mbps/25Mbps so the speed is not the issue).
First, I would like to get those ports open to see if it fixes the issue. Any idea ?
Thanks for reading.
Hi all,
Sorry I could not find how to edit my previous post (or maybe I just cannot?).
Since the last PS4 and PSVita updates, everything works perfectly !
I set the PS4 on the DMZ with a static IP and followed the explanation here http://manuals.playstation.net/document/en/psvita/ps4link/viainternet.html
I also unchecked "Connect Directly with PS Vita" in PS4 settings just in case (it may be unnecessary actually).
I hope some people will figure this as well. I was almost giving up and nearly bought a new wireless router.
So happy I don't have to after all
Enjoying FFXIV remotely on my lunch break at work and in the subway over the 4G network !
Similar Messages
-
Why have apple not launced new airport express 802.11ac version
Why have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
Do you think they will launch one soon as wanting to extend my WI-FI network but don't want to purchase current Airport Express 802.11n version if a new model is due to be on sale in the near future as would prefer latest models/technology.
Please advise
Regards
DaveWhy have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
Do you think they will launch one soon ......
Sorry, but no one here on a user-to-user support forum will be able to tell you what a notoriously secretive company like Apple will do or when they might do it. We are all users.....just like you.
You would need to ask Apple about this, although I would be very surprised if you get an answer with any real information.
http://www.apple.com/support/contact/ -
AirPort Express (2nd generation) not visible in AirPort Utility or iTunes (AirPlay)
Hi!
I'm using an AirPort Express (2nd generation) for my Wi-Fi. I've configured the AirPort Express with my iPhone 5, but when I try to find the AirPort Express on my Windows 8 computer, it doesn't show up in the AirPort Utility software and in iTunes, the AirPlay function is not available. The AirPlay function is working fine on my iPhone 5/5s. What can I do to get the AirPlay function working in iTunes on my computer?
I thank you in anticipation!
/ralledensejeiTunes: Troubleshooting AirPlay and AirPlay Mirroring
About AirPlay Mirroring in OS X
For AirPlay Display (video) to work, check if the checkbox at System Preferences -> Displays.
For AirPlay (sound) like iTunes, check if the device shows up...
If you have Firewall turned on the Mac, check if Bonjour ports are open. -
Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
Thank you for your time.If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration. -
Windows 7 conflict with airport express 2nd generation
My airport express (2nd generation) is losing it's wifi connection with my router after being connected for an hour or so. It was worse (happened faster) until I made some setting changes. Here is the current config and purpose of what I am trying to accomplish...
Goal - Connect my son's new gamer computer that is running windows 7 professional to the internet
Config -
1. Airport is set up to connect to an existing wireless network that uses WPA/WPA2 Personal security
2. Ethernet cord is plugged into the ethernet slot in the back of the airport and runs to the ethernet slot on the computer.
Once the connection is lost, all you have to do is unplug and re plug in the airport and the light goes green and all is good for a little bit.
Yes, I have unplugged, disconnected and reconnected the router, too after making changes.
Any help would be greatly appreciated.iTunes: Troubleshooting AirPlay and AirPlay Mirroring
About AirPlay Mirroring in OS X
For AirPlay Display (video) to work, check if the checkbox at System Preferences -> Displays.
For AirPlay (sound) like iTunes, check if the device shows up...
If you have Firewall turned on the Mac, check if Bonjour ports are open. -
Is it normal that Apple TV 1st generation cannot use AirTunes with Apple TV 2nd generation or Airport express 2nd generation? I want to play music synced in my ATV 1st gen. to a nymber of speakers in the house. In the list of speakers I can see Apple TV itself and my two Airport Expresses 1st generation but not my Apple TV 2nd generation or my Airport express 2nd generation. For the ATV 2nd gen. I found a solution: when I enable the Airplay setting of XBMC which is installed on my ATV 2nd generation, then AirTunes in ATV 1st gen. sees the speaker "XBMS (Apple-TV)". Itunes can in my Macbook pro can use Airplay with all my speakers, i.e. ATV 1st gen., ATV 2nd gen., Airport Express 1st gen., Airport Express 2nd gen.
Last time I checked ATV1 could not use Airtunes to send audio to an AppleTV 2 or 3 - highly annoying as you think they would have kept backwards compatibiility for audio, but it seems Airplay is more than a superset of Airtunes.
AC -
What is the range of an Airport Express 2nd generation? The range is better than the 1st generation?
What is the range of an Airport Express 2nd generation? The range is better than the 1st generation?
150 feet in clear space with no obstructions in the signal path. It is not possible to predict range with any obstructions in the signal path.
-
is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?
HenrikAppleJespersen wrote:
is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?
Yes, it is one of the things AirPort Express was specifically designed for. -
Can i use my Airport Express (2nd generation) instead of a Sonos Connect
I have an Airport Epress (2nd generation) and want to use it instead of buying another Sonos Connect At the moment my Sonos Connect is hooked up to my Bose Solo as part of my Sonos audio system around the house. i want to move the Solo to the dining room but keep the Connect in the living room hooked up to my CD player. Instead of buying another Connect for the Bose can i use the Airport Express that i have spare and config it to use like the Connect.
Can anyone help??
BarryYes, and no. You can connect the Bose speaker to the AirPort Express, and then, stream iTunes via AirPlay to the Express.
I believe Sonos uses a different audio streaming protocol than AirPlay. You cannot directly stream from a Sonos server to the Express. For that you will need one of the Sonos solutions. -
During the firmware install there was a problem so that the status light on airport express was amber. It would change to gree for a short while after re-plugging the USB connection between the Airport and hard desk drives (via a hub).
I can see the hard disks listed on the macbook (OSX 10.7.5) finder but not the files on the desks. The hard desk listing have also come up on the imac (OSX 10.6.8) but not often and again there are no files listings available.
A Brothers LaserJet printer sometimes also connected to the hub and then airport also sometimes requires a re-plugging of the USB connection between the hub and airport.Apple uses Akamai for their software distribution.
See
http://support.apple.com/kb/ht3923
The latter (http://swcdn.apple.com) currently redirects to the Akamai content distribution network that hosts the updates. Note that the redirected IP address of http://swcdn.apple.com may vary over time or by geographic region.
and https://itunes.apple.com/us/app/akamais-state-of-the-internet/id800491468?mt=8
Many of the large computer companies use akamai for software.. so it may have picked up those addresses from clients behind the Express.. although normally their IP should show directly. -
How do I set up a guest account using the AirPort Express 2nd Generation?
I Just purchased a new 2nd Generation AirPort Express. The features list and the set-up guide says that I should be able to set up a guest account, but nowhere have I found how to do this. I am running AirPort Utility 5.6 on my MacBook Air under Lion and I even get a message that I should not make updates using version 5.6 because it is not the appropriate version for the 2nd generation AirPort Express. Software Update says there's nothing new for me. When I search the Apple support site there is not even a version of AirPort Utility 5.6.1 for Lion though there is one for Snow Leopard. Even when I installed that version on my Mac Mini running Snow Leopard, I could see no way to create a guest account.
I came across a YouTube video describing a demonstrating how to set up the guest account on Time Capsule and the AirPort Exteme. There it's quite obvious because in the General section there is a tab for setting up the guest account. There is no such tab in either version 5.6 of the AirPort Utility I'm running under Lion or version 5.6.1 running under Snow Leopard.
What am I missing?
-BillApple assumes that you are connecting the AirPort Express to a simple modem....not a modem/router or gateway type of device......that provides both modem and router functions in one enclosure.
If you have the AirPort Express connected to a gateway device, the Express is detecting that another router is present on the network, so the Express operates in Bridge Mode to prevent the conflicts that would normally occur when two routers are on the same network.
Open AirPort Utility 5.6, select the AirPort Express and click Manual Setup
Click the Internet icon, then click the Internet Connection tab
If the Connection Sharing setting is currently configured to "Off (Bridge Mode)", the Guest Network cannot be enabled with the type of "modem" that you have without breaking some basic networking rules. -
How to find MAC address for WAN port for Airport Express 2nd Gen.
The New Airport Express has a LAN and a WAN ethernet ports. How can I find the MAC address for the WAN ethernet port as my Service Provider needs it for provisioning....I can fid MAC address for Ethernet and for two wireless 2.4 & 5GHz but not for WAN ethernet port using Airport Utility 6.1
Many thanks for the swift response. However, there is no WAN MAC address on the box or on the device anywhere. I even used magnifying glass to find one .
The airport utility shows only three mac addresses. One for 2.4GHz, one for 5GHz and one fo the ethernet (LAN port) whereas there is another ethernet port in the device mentioned as WAN port and I am still not able to find the MAC address for the WAN ehternet port for Airport Express (2nd Generation).
Will appreciate a response to make th device work wiht my service provider as providing them the WAN mac address is a must. Had there been an option for cloning mac address, the issue would have not been there.
Many thanks again - in advance. -
Airport Express (2nd) will not extend existing Wi-Fi network
I am currently trying to extend my home Wi-Fi network (Virgin Super Hub 2) using an Airport Express (2nd generation). It will run on my up-to-date Mac or iOS devices.
I am not able to get the Express to extend the network no matter what I do. I have had this problem really since I had it just under 3 years ago, but only now I really need it to work.
When configuring the Express to extend the network it will either:
1. Stay continually flashing orange after applying update, then say unexpected error.
2. Or just go straight to unexpected errorAn AEX will only extend a wireless network created by an Apple Airport Extreme Base Station. If will not extend a non-Apple router unless you run an Ethernet cable from the router to a location from which the AEX can create a new Wi-Fi network that covers the remote location. The AEX is configured to Join the existing network - bridge mode.
-
AirPort Express (2nd) Internet Connection Speed
Dear All
First of all, I looked everywhere on the internet about this issue I’m having and couldn’t find any solution. To explain my issue let me tell you how and why I use AirPort Express shortly;
My Purpose
I have a wireless network and all my PCs are connected in one network. I have a Windows server and using it for general purposes and also as a file server. But if someone joins my network, they all are able to see my shared folders. They are able to read/write files (even delete them).
So I decided to create 2 networks with AirPort Express (2nd Generation). I have a wireless network for internal use only (for me and my PCs) and one Guest network.
Everything seems okay and there is nothing wrong.
How I Installed AirPort Express (APE)
I connected APE to my router (standard US Robotics DSL router) and my switch to APE. I used AirPort Utility on a Windows 8 PC and configured APE settings.
Base Station status seems normal (have a green light as well) and works okay. I can use my internal network, my PCs are communication with each other (they are all on the same switch). Guest network also works okay and seems like there is nothing wrong.
My router uses 192.168.2.xx IP range and APE is using its own 10.0.1.xx IP range. This makes APE to add an issue to Issues list as Double NAT.
What is Wrong?
I have internet connection and I can browse web pages and do that kind of things. But my internet connection is really slow and some times cannot display web pages. I have to refresh some pages a few times to display it. My ping increased 5-6 times over than normal.
I thought the problem is the PC that I’m using but then realized that every PC has the same issue. I made a speed test and it showed 352ms ping to the nearest server to me which is really a high value.
My connection is unstable. It’s not dropping but speed suffers. Here is a test result. In this test my ping was 31 ms but as you see speeds are suffering. My connection is supposed to be 8mbps (Down) and 1mbps (Up).
What should I do to fix it? What is the point I’m missing? Could you please help me? Please let me know if you require further information.
Thank you very much.
Best RegardsDear All;
I just disabled DHCP Server from my router and now it seems to be better. But I don't know if it's something that I shouldn't do or not. Have any ideas?
This is the new result after disabling DHCP from my US Robotics router. There are still some minor issues (latency, slow downs etc.) but now seems to be better than before.
PS: I still have that "Double NAT" notification under Issues section.
Message was edited by: SakirSaka -
Wireless iBook not connecting to Airport Express
As in previous discussions i've seen, all of a sudden my iBook which i have used for quite some time now without any major problems will not find my airport express wirelessly, i am using a router and the same connection for my desktop (hardwired) and the desktop works 100%, i've even replaced the cable from the router to my Airport Express and when I take the very same cable that goes from the router to the AE but plug it straight into my iBook it works 100%, but when plugged into the "AE" the iBook is not finding it, or actually it does come up in the list of available wireless ports (I live in new York city so there's a bunch on there at any given time) but it does find mine automatically as it used to, but when I try to connect to it when i find it in the list, it says "There was an error joning the AirPort network"... if i hit 'try again' several times it it will evntually (somrtimes after 3 tries othertimes after 30 tries)... but even after it says in the menue bar that I am connected with 100% strength, nither iTunes Air tunes finds the AE connection nor Safari (which says "You are not connected to the internet.")
At the browsers suggestion i then go to the network diagnostics and run through the prompts, until it gets to the 'Select AirPort network" window and nothing shows up.
Then i tried the AirPort Admin utility and it does not find my base station either.
My connection to the internet is 100% without the AE, so obviously something is wrong with my iBook airport card or the AE itself.
Yesterday I uplaoded the newest software 6.2 then reset the AE and actually it worked 2 sessions, then I got back on later in the evening and was having all the same problems...
so I read on these discussions that going back to 6.1.1 was what was helping others, well so far it has made no difference here.
that said the signal that it did find after trying again and again and that does show up in the pulldown signal menue drops off eventually... and all this while still not being able to connect to the internet or airtunes wirelessly. and again all the while my connection on my desktop (hardwired through the same router) works 100% (I have verizon DSL and it's pretty great.
THE AIRPORT EXPRESS GREEN LIGHT IS ON as well.
I have not done a 'hard 5 second re-set" of the AE becuae i thought it might be difficult to imput all the settings all over again, since i did not set it up myself originally... is this my only choice? can some one give me any other ideas? thank you.Glen,
I feel your pain buddy - same issue here. I have a PG G4 running AE as well. I have internet through Comcast which is coming from the wall, into the modem, and then to the AE. I have faced similar problems as you at least twice in the past three days. Tonight I went to check my e-mail after reading for a couple hours and my drop-down showed a check next to my network, the AE status light was green, and it looked fine. However, when I went to check e-mail I was not connected and same thing with internet. I finally launched Airport Admin Utility and my base station did not show up in the source list - hmmmm?
I am a little concerned about this myself because it is frustration. If you push the reset button on your base station while it's still plugged into power and hold it down for five seconds it will go through a "hard" reset (keep in mind this is not the same as a "factory default" reset). Have you done this before? It takes about 45 seconds. When done and the status light is back to green, you can join the Apple network _______ (some strange numbers) from your airport drop down and then launch Apt. Admin Utility. When you double click on your base station from the admin utility it will come up with a list of profiles. It will allow you to select your previous saved profile from a list. Click on your previous profile, click OK, and the AE will reset with your previous settings. This has gotten mine back up and running, but it's a littl disconcerting that it's happened so much
Any other thoughts out there? Anyone else having these problems and have suggestions for troubleshooting?
-JB
Maybe you are looking for
-
Bought a brand new battery from an authorized Apple Premium Reseller but the laptop is not recognizing the new battery
-
Captivate doesn't recognize my USB microphone
Hi there, I'm using Vista (32) with Captivate CS4. I have USB microphone (Sennheiser PC-166) that works beautifully with other applications, but I can't get Captivate to recognize it. When I configure settings...Captivate hears my default PC micropho
-
Transfer past purchases to new account
Hi, I currently live in Germany and will be moving in 1 year to the U.K. I will be opening a new itunes account when Im there but will I be able to transfer all of my previous purchases I made in Germany to my new U.K. account?
-
Number field problem in forms. It does not allow zero
Hai all I have two number fields.[ database items]..When i try to insert data ,it does not allow zero in starting position. How can i make this to allow zero in starting position ? For example when i try to insert 02323 in one of the database item ,
-
TS3899 I can send emails but I can't see them in sent mail
I am sending emails and they are received but I can't see them in my sent mail - I'm sure it's a settings issue but not sure how to change it?