Why targetcosts are not displaying in cost analysis
hi
i have created productcost collector thru kkf6n for a material.
for that material i have backflashed and confirmed thru MFBF.then
i display the cost analysis of productcostcollector where system is
showing only Actual costs not target costs.
can any body tell me why it is not displaying the targetcosts
Thanks,
Neelima
Hi prasad kumar,
1. Make sure the target cost version 0 (TCode: OKV6) is maintained correctly.
2. Update run the variance calculation (Tcode: KKS6/KKS5) for the PCC.
Regards
Similar Messages
-
Any suggestions about why images are not displaying in a published web gallery?
A web gallery generated in Lightroom 3 in 2008 was certainly working correctly when originally published to our (Guernsey Museum) website and still functions correctly from the staging server across our intranet. I have republished it from the staging server (via Dreamweaver) and checked that all the files are present on the live site but still the images refuse to show. The audio associated with the images and the gallery framework itself does work as expected. Another gallery made later and published to the same site works exactly as it should. The ISP cannot explain why one gallery is working properly and the other is not so I'm asking here in desperation if anyone has any insight into possible causes. The (Book of Sark) gallery which doesn't work is here:
http://www.museums.gov.gg/BkSark/gallery/html/index.html
The (Peoples Choice) gallery which does work is here:
http://www.museums.gov.gg/p-choice/index.html
Thanks for reading this far - any helpful suggestions would be much appreciated!It looks like the Book of Sark gallery has photos in a bin folder. Some servers don't like that, but it could be a clue for the ISP.
-
Images are not displayed into gridPanel
I use a gridPanel to display dynamically images.On the first load of the panel the images are correctly displayed.Then I have a button used to display other images when I click on.
I had an exception of duplicated component id . So on each load I do a
grid=new HtmlPanelGrid();grid is the panel in which I display the images.
And due to this I have not the previous problem
But after the click on the button I still have the previous images.My action listener works correctly.But I don't know why images are not displayed.
Can you please help me.
Thanks in advance .Hi
As per default OpenScript will ignore any URL that contains an image, to change the filters you can:
View -> OpenScript Preferences > Record -> HTTP Module -> Select the URL filters Tab to add/remove or edit any filters
You can un-check the first one on the list to enable image recording.
Regards
Alex -
Multi level BOM explosion in CS11/12/13 Cost of items are not displayed
Hi,
I want to display cost of the components in CS11 / CS12 / CS13 T.codes Std SAP will not display the cost of components. for this they have given note 177006 and asked to change some manual correction. In the post processing of the note they have asked put "your_display_profl" This is making me confusing I wanted know whether I want to create a new display pofile using CLVL t.code or can I make the correction as said by SAP "your_display_profl". Could some body guide me in this regard.
Regards
Ramana>
Venkata Ramana wrote:
> Hi,
>
> I want to display cost of the components in CS11 / CS12 / CS13 T.codes Std SAP will not display the cost of components. for this they have given note 177006 and asked to change some manual correction. In the post processing of the note they have asked put "your_display_profl" This is making me confusing I wanted know whether I want to create a new display pofile using CLVL t.code or can I make the correction as said by SAP "your_display_profl". Could some body guide me in this regard.
>
> Regards
>
> Ramana
Ramana,
Which version of SAP you are using, if its below 4.6c, then
You need to have custom Display and Print Profile defined through CLVL transaction and used in the modification proposed.
If your version is 4.6c onwards then,
If you want to use the variable list then you need to have the You need to have custom Display and Print Profile defined through CLVL transaction and used in the modification proposed with IF.
If you want to use the ABAP ALV based output, then you should not implement the IF... ENDIF query of the suggested modification concerning the user-defined list profile; instead you should set the local L_MBWLS parameter to 'X'
I hope you need to work with your ABAP person to clearly understand this correction Instruction and Implement as required.
Regards,
Prasobh -
Why are my JPEG exports from Lightroom 4 are not displaying on other computers?
When I export JPEGs from Lightroom, they display fine on my computer but when I send them to the client, they are not displaying at all. There is a message saying that the software on the clients computer may not be up to date so I tried updating their software but to no avail.
I know, it's strange. I've never encountered it before. They are definitely JPEGs, although I don't know if the difference between JPGs and JPEGs is anything to consider.
On my computer, 2008 MacBook Pro, OS 10.8.3, they display through Preview. Also, when I upload them to Dropbox, the thumbnails display correctly. I have transferred them to a USB key as my client was not tech savvy enough to grasp Dropbox. When I brought the USB Key to the client and transferred to her MacBook Air, neither the thumbnails nor the photos themselves displayed. I also tried transferring to her PC and the same result.
I was trying to contact Adobe support to see if this was a problem other people had experienced. -
Why key figures are not displaying
Dear Experts,
I am faced with a problem not encountered before. My report has multiple key figures all of which are not displayed when I run the query. However if I change the view to Tabular format (from query properties) the key figures become visible.
Request your help in resolving the issue.Hi,
are you hidden the some key figures? please check.
select the KF -> go to properties -> check the display tab - hide/show/hide can be shown.
if not close and open one more time in query designer.
Thanks,
Phani. -
PDF files are not displayed. Why?
Most of the PDF files I uploaded are not displayed on Creative Cloud. Some I can view page by page, but most are only displayed as generic PDF icon.They are not very complex or difficult files - What is the problem? My InDesign files are displayed nicely. Even GMail displays the PDF files without a problem.
Any suggestions?Hi,
The problem I have with displaying PDF files is still the same: as soon as they are locked against editing (NOT password protected against opening) files cannot be viewed on Creative Cloud.
I just downloaded one of the files to my computer and e-mailed it to myself: GMail can view it without any problem. It's a bit strange that Google can do something Creative Cloud can't.
And its REALLY annoying that some PDF files just can't be viewed in Creative Cloud
Thanks for your help! -
Chinese characters are not displayed in the Firefox bookmarks
Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
I googled and got some tips:
1) Set your browser to recognise Chinese language internet sites.
Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
- I did this.
2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
Encoding settings can be changed under the "View" option in your browser's menu-bar.
- It was already set to UTF-8.
3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
- This has been done when I installed Windows.
I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla. -
Search for member activities - points are not displayed correctly
Hi experts,
I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
Can anyone tell me why the points in the result list are not displayed correctly?
Thanks and best regards
AnneSometimes threads are deleted if they violate the Rules of Engagement. If that happens, you'll lose points that were allocated to you. Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this. I'd guess, it's more likely you'd responded to a post that broke the rules.
Really important
1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable).
2. Don't ignore rejection emails or other communications from moderators. They are followed up, and, if warnings are ignored, then accounts will be deleted. Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
matt -
Entity Descriptions are not displayed correctly in Combo box dropdown list
In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
Example:
'Entity A. LTD' becomes 'LTD'
'Entity B Inc.' becomes blank
It seems that everything before the dot is not displayed when opening the combobox.
It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
Does anybody knows the sollution or have seen this issue before?Hi,
This is a known issue with combo box list of values.
Please follow this workaround:
- Remove ComboboxLOV on Deptno
- Create an updateable transient attribute(Say Dname) of type String
- Define combobox lov with following values:
List Data Source: DeptView1
List Attribute: Dname
List Return Values:
Dname - Dname
Deptno - Deptno
UI Hints: Display Attribute - Dname
- Edit Dname(transient attribute) and provide following groovy expression
oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
Sireesha -
Songs are not displayed in my ZEN when they have no Album T
Hi,
i got the new Creative ZEN 4GB and a question:
I got some Songs which have no Album Tag. These Songs are not displayed in my Player. I have to go in the Folder of the Artist and then into Options and choose "View Tracks", then it is displayed, otherwise the list is empty.
Is this normal?
Most of the Songs are Single Tracks which dont belong to any Album. Do I have to add an "Unkwown" Tag to each of them to show up?
P.S. I think this browsing by Tags really sucks at all. Why cant I sort my files by the simple filename like I do it on my PC?! They should add this option.
Thanks.Message Edited by omgodlike on 0-0-2007: AMI have the ZenV Plus, 2 gb and it lists the songs by Artist, by Album, by Genre and then it has a complete alphabetical list of the songs by title (All tracks). Don't you have this option uner your "Music Library"
-
Why lables are not possible in smartforms.
In script Lables are possible but in smartforms lables are not possible .
why lables are not possible in smartforms?HI,
Refer to the wiki in the link.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/label%2bprinting%2bin%2bsmartforms
Regards
Sumit Agarwal -
How odd. I've a somewhat complex bookmarks menu hierarchy, perhaps two dozen folders each containing between five and fifty bookmarks as well as a sub-folder or two. All of this is synced and displayed correctly with the bookmarks tab in the app, except for some of the more recent bookmarks that not organized into folders, and are floating inside the bookmarks menu. Of thirty or so, only five appear. Yet, when I search for them within the app they are found, including several bookmarks made today. These are bookmarks contained in the bookmarks menu but not in any particular folders. Clearly they are synced, yet the entire contents of the bookmarks menu are not displayed correctly in the app. Syncing otherwise seems swift. I've less than 600 bookmarks in total. I seek not to search for specific bookmarks but to browse my entire collection, so you can sense my frustration. I'd call this a bug. Any thoughts? Thanks!
No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla. -
Changes in custom.css are not displayed on iPad
Dear all,
I'm using a custom.css file in my Analysis Application.
Changes in this CSS-file are immediately shown in my design in Design Studio and when executed on the BI Platform.
However, these changes are not displayed when I run the application in SAP BusinessObjects Mobile on iPad.
Thanks for sharing your ideas,
HansHi Hans,
If you make changes to your custom css file and reupload the file to your BIP and then open the report, does it help if your clear your browser's cache and reload the report again, do you see the css changes then?
So instead of restarting the APS just clear the Browser Cache. The changes will be seen only in the browser and for the user who has cleared his browser cache.
If you want to disable css caching there are different options available in general but with Design Studio only some of them can be implemented: you could configure your web server (for example Apache) to force refresh of cached data for example by setting some header parameters/values or with some other method.
(just take into notice the performance implications of such a setting: the best option would be to force the reloading of the css file only when it changes and only for files that are changed, not for all css files all the time)
There is a lot of information about overcoming caching techniques alone when you do a search on the stackoverflow site, for example this one has some good techniques:
What is an elegant way to force browsers to reload cached CSS/JS files?
Regards,
David -
To transfer the data Cross the systems why we are not using BAPI Method?
Hello All,
To transfer the data Cross the systems why we are not using BAPI Method? why we are using only ALE/IDoc's?Hi Naveen,
Listing down those I know -
1. Master data is expected to be changed/created less frequestly.
2. Transactional data is expected to be chnaged/created more frequestly.
3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev
Maybe you are looking for
-
If you download an app that is not free is that charged monthly or is that a one time fee?
i have free apps, but i was wondering about the ones that are not free, are those a monthly charge or is it a one time charge?
-
Error msg: device failed to calibrate laser level
I am trying to burn a dvd using disk utility and it gives me the error message burn failed: device failed to calibrate laser level. I can't burn with toast titanium either-gives me medium error message Should I try different DVD-Rs? I am currently tr
-
GridView support auto width and center both LandScape and Portrait
Hi. I have a problem with GridView. How can i set auto width of item in GridView and auto center it ? I add 3 item and width_height of each is 100. My code : <GridView x:Name="gridControl" Padding="5" ItemsSource="{Binding}" HorizontalAlignment="Cent
-
I do any course or cetification for entring in SAP World....
I have 1 year 5 month experience in telecom industry and also have 2 year exp as a trainee in sap SD and BASIS, so please advice me how i will come in sap world. Please suggest me if i join any training course or do certification. Please guide me....
-
How to create "transition" while FLV Videos load before and during "chaining" or "looping"
The Status: OK, I now have Action Script 3 that will work for chaining FLV videos... or Looping an FLV video. But when one video ends there is a short pause before the next one loads and starts... the progress bar for the Flash Player displays diagio