Why the cursor changes only after moving the mouse?

I have used the setCursor() on a JInternalFrame to change the image of the cursor. I change the cursor to Cursor.WAIT_CURSOR and back to Cursor.DEFAULT_CURSOR in a new thread. Then the only way for the cursor to change from WAIT to DEFAULT is to move the mouse, otherwise it will remain in WAIT status. What's going wrong?

I am using version 1.1.2 in JBuilder1. I have an extended Dialog as an interface to change the Oracle Password. When the OK button is selected to complete the process of accessing the DB to make the change, I change cursor to the wait cursor before the DB is accessed. I have to move the mouse to trigger the cursor change to wait. I would think there would be an efficient way to do this. I would also appreciat some help. I'm not sure if this is a problem in later versions.
Thanks,
Mike

Similar Messages

Why the mouse pointer in Logic Pro does not change shape during work in OSX 10.9.1?

I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
Why the mouse pointer in Logic Pro does not change shape during work???
It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
This thing drives me crazy!
Solutions?
Here some ideas in other foums:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!

I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
The Result:
Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
BUT
Reason and Nuendo dont' have this issue !!
I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
And that's not all!
After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple!

What is error 150:30, and why won't CS4 work after moving it from old mac to new?

What is error 150:30, and why won't CS4 work after moving it from old mac to new?

Reinstall the software properly
Mylenium

Why does cursor changes to arrow and typing stops

When typing or attempting to type, the cursor drops from the end of the letter and turns into an arrow, which can appear anywhere on the screen. I then have to move the mouse to the last place I typed. Have restarted and shut down computer several times. No change. How do I fix this?

I DID get the 'middle pane' - which I am very used to seeing and, as always, unchecked the box to receive the unwanted programs (I already have Google Chrome AND an excellent anti-virus program - thanks all the same!).
But it then went on to offer me additional programs. I did not take any screenshots as I was not expecting all this palaver. And I don't remember what the programs were that I was offered either. I just wanted to get on with the download and get on with my business. I was getting very frustrated though. As I said earlier, underneath the small dialog window which was offering these programs (and which, if I remember aright, was inside the main window) - the "Accept" and "Decline" buttons were still visible BUT it looked as if the "Accept" button was the only active one (being highlighted) whereas the "Decline" button was greyed out. And, as I said before, it 'looked' as if one needed to click the "Accept" button to agree to the Conditions of downloading (which is quite normal, as you know).
But being of a wary nature and hopefully not as gullible as some, I tentatively clicked on the "Decline" button anyway - and it worked. The offer of those one or two extra programs was then replaced by one or two more - in the same type of small window. Having learned my lesson, I continued to decline and eventually got to the end. But this experience did make me feel most irritated, as I indicated in my original post. It should not be necessary to be expected to jump through all these misleading hoops just to update an every day program, should it?

Why the mouse ( any kind ) halts for 5 mins every time when I start Mac Pro

As soon as I start my Mac Pro, the apple logo appears abnormally long. When it finally comes into the system, the mouse icon moves but I cannot click into any of the desktop icons.
I have reformated my harddisk, but the problem still appears. Does any one know how to fix my problem?
thank you

Normally I would say a combination of *Disk Warrior* and SuperDuper to solve the issue, and look for any/all (bad) usb cables and devices (hubs and printers too).
Don't import your old prefs etc and keep it clean while you test and look for why.
But normally a long logo 'gear' etc = corrupt caches or disk directory.

Why does MMS work only after turning the iPhone off and on for iOS6?

I got the new iPhone 5. When sending/recieving pictures i have to turn the phone off and then on. For sending, it works for about 5 minutes and then i can't send anymore. I tried turning wifi off and leaving data on, turning LTE and wifi off with data still on, and other combinations. The only time it works is when i just turned it on.

The message you are seeing is telling you that you do not have enough storage on your device. That has nothing to do with iCloud storage.
iCloud storage is storage on Apple's servers hosting your online iCloud account. The storage on your device is local and cannot be expanded - it is whatever you bought with the device (16GB, 32GB, 64GB).
You need to delete things on your device to increase free space on the device itself.
For example, if you have a lot of pictures in your camera roll, you need to sync those to your computer's photo management software and storage, then delete them from you iPad.
You can delete apps you no longer need or use. You can delete messages you no longer read or use.
Bottom line is you need to remove stuff from the iPad itself to free up more space.

Why resolution will change in After Effect?

Would you please help me? I have problem with imported files in After Effect, the file resolution in After Effect is different from source file.
I am editing an NTSC video file in Edius, the resolution is 720x480-widescreen16:9 and aspect ratio is 1:2, I exported part of clip with exactly same feature but when I imported video in After Effect, the resolution and Aspect ratio changed, right now the resolution in After Effect is 856x480 and aspect ratio is 1:00, I dont know why it changed.
The video format I chose in Edius was Canopus DV AVI, could it be the reason? Should I use another format?
Can anybody help me? What is the problem? How can I solve it?
I appreciate any help in advance.

You should separate fields if the video is interlaced. You may either work in a square pixel comp or a rectangular pixel comp. AE will handle all PAR correction internally without problems as long as the footage is properly interpreted.
For render, if you are going back to canopus for editing you should render with the same frame size and specs as the footage. You may choose to interlace the output if you desire. I presonally haven't rendered anything as interlaced for years. I used to shoot film and I hate the look, but it's a matter of choice.
I'm not sure what you're referring to as the interlacing problem. This is the first that I've heard of that. If you mean that the footage looks interlaced in AE then that's probably the case. If you separate fields properly then there should be no interlacing problem. Interlacing has nothing to do with pixel aspect ratio.
Interlacing does have something to do with comp size if your footage is a different size vertically. For example, if you put NTSC DV footage which contains 480 scan lines (480 pixels high) in a D1 comp 486 scan lines (486 pixels high) and you don't separate fields in that footage, then you render introducing fields in the proper order for your D1 capture solution, the field order in the original footage will be reversed. The solution there is to move the footage down 1 pixel. This is kind of a mute point anyway because if you're moving video around in the frame, scaling it, or rotating it in any way you should be separating fields on all interlaced footage. There's no exception to that rule.

Why are emails making copies after moving to subfolder?

Hi guys - I've always been able to solve issues on my own reading through all of your posts but this one has me thrown for a loop. I installed Mavericks yesterday and after doing so, changed my two Gmail-based email accounts from Exchange to Gmail (IMAP). After doing so, everything seemed fine until I received a new email and as I always do, would move it to a subfolder I had created on Mail (as well as in Gmail). In the past, I would drag it to the subfolder from the Inbox and that was that. But now, I'll drag the email to the subfolder, it disappears from my Inbox but a minute later, reappears as well as a copy in the subfolder I moved it to.
I tried to revert to the Exchange based email to see if that would fix it, but to no avail. I have noticed if I delete the email, it will go to the Trash (disappearing from the Inbox), then dragging it from the Trash into the subfolder and it works perfectly. What am I doing wrong?? Thanks for any advice...

You can recover them from the backup you have on Time Machine.
If you don't have a backup:There are some third party utilities that might be able to recover the files if you didn't write new data over them. Here's one: Mac Data Recovery to Recover Data on Mac OSX – Stellar Phoenix
How to avoid this in the future:backup anything you don't want to lose.

Why are my folders empty after moving from desktop to documents?

I copied all of my files and folders from the desktop to "documents". They transferred ok and then I deleted them from the desktop. The next day, all of the newly moved folders were there in "documents" but they were all empty.
How can I find and/or recover them?
How can I prevent this?

You can recover them from the backup you have on Time Machine.
If you don't have a backup:There are some third party utilities that might be able to recover the files if you didn't write new data over them. Here's one: Mac Data Recovery to Recover Data on Mac OSX – Stellar Phoenix
How to avoid this in the future:backup anything you don't want to lose.

Why is my internet SLOWER after moving to ADSLmax

Hi,
Ive just noticed that my move to ADSLmax has been completed. Before I go any further, I MUST stress, I do not have a home hub, so asking for statistics from said homehub will be wasting time.
Ive just ran a bt speed test with the following result
Download speedachieved during the test was - 1.7 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :7.62 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 2 Mbps
Is there any reason why my IP profile is STILL set at 2 megs? This is really and truly the slowest my internet has been.
I have NOT reset my router since sunday when I had a day of area related issues.
Router stats are as follows:
Status:
Configured
Current
Line Status
SHOWTIME
Link Type
Fast Path
[Go Top]
Data Rate:
Stream Type
Actual Data Rate
Up Stream
448 (Kbps.)
Down Stream
7616 (Kbps.)
[Go Top]
Operation Data / Defect Indication:
Operation Data
Operation Data
Upstream
Downstream
Noise Margin
8 dB
23 dB
Attenuation
41 dB
--- dB
Defect Indication
Indicator Name
Near End Indicator
Far End Indicator
Fast Path FEC Correction
0
0
Interleaved Path FEC Correc
6
0
Fast Path CRC Error
0
0
Interleaved Path CRC Error
2
0
Loss of Signal Defect
0
0
Fast Path HEC Error
0
0
Interleaved Path HEC Error
0
0
[Go Top]
Statistics:
Received Cells
3127991
Transmitted Cells
2946371

Looking at your adsl stats, your sync rate is at (the speed in which your router/homehub is connected to the exchange)
Up Stream
448 (Kbps.)
Down Stream
7616 (Kbps.)
Meaning that your router is connected with a speed of 7.4mb
However your IP Profile is currently at 2mb, as your in a 10 day stabilisation period which means that the exchange is currently finding the right speed for your line and your IP profile should increase during this time.
If you would like to contact the BT Care Team who are a UK based BT specialist Team then see the link in Keith's post.
Please remeber to keep your router/homehub connected 24/7 otherwise problems can occur.
From your line Attenuation of 41dB this gives an estimated line distance of 3km.
cheers
I'm no expert, so please correct me if I'm wrong

Why does keyboard work only after restart

This is an irratic problem. I have pen/pad not mouse but same thing methinks, can open files etc but when it comes to filling in anything it will not allow, sometimes even after restart it works butthenafter abreak I find it will not allow typing again!
any ideas

connected via usb/wacom... software=10.5.8
thanks

Change Status only after Import a Document.

Hello Dears,
Someone knows how I can lock the user status to change only after import a document in the support message?
Thanks,
FS.
Edited by: Fabio Sato on Apr 13, 2009 8:18 PM

Hello to all.
Until now, no one have an idea of how to do this, without a ABAP development?
Regards,
FS.

After recent Verizon upgrade, my music files are messed up. Used to be able to see all artists. Now only some artists display and there's one giant file of "unkown". Why would that change affter the upgrade?

Prior to March, 2015 upgrade, all my music appeared by Artist. After the March, 2015, upgrade, about half of my music appears by Artist and then there's one giant "unknown" file. Why would this change with the upgrade? Makes my music unsearchable unless I want to search by the song name or album name.

You can try an app like Album Art in the Play Store and it will take any tag info and find and sort music. Should work unless the music files were altered during update, in that case you'd need to remove those files and re-add them to the phone.

Why is the position of key frame BEFORE scene changes not after?

Why is the position of I frame BEFORE scene changes not after?
And, why doesn't MovieVideoChart show any I frames other than those that correspond to periodic "key frames every X frames"? Is it reading meta data and not really showing where the real existing I frames are located? I.e. WYSIAL (what you see is a lie)? If so, where can I get an affordable tool that will let me examine my files in this regard?
I have put compression and chapter marks at scene changes in FCP and have exported with markers for DVDSP (both chapter and compression).
I have read on this forum (somewhere) that when insert key frames every X frames is selected, Compressor is still going to insert key frames automatically at key frames.
When I last encoded with H.264 in Compressor, I selected option to insert I key frame every 90 frames (fps=29.97).
When I jump to chapter in my encoded video, where I had place a key frame at a cut, I end up with a chapter at the frame BEFORE the cut.
I will try moving my chapter/compression marks a frame ahead and see if that helps.
Certainly, others must have been plagued by this problem.
When encoding with MPEG2 for DVD, the same thing happens.
It is a real problem. I get one frame appearing before the cut in chapter skips.
Hope someone can illuminate this problem.

Hi there
As you have seen, RoboHelp doesn't understand how to create the layers you are wanting to achieve the effect in Word. It simply brings the images in as separate objects.
Basically there are two approaches you might consider.
You could insert Positioned Text Boxes and configure them to present the images as you want. If you take this approach, you will likely find yourself struggling to maintain the positioning consistently as well as noticing text flow issues. Personally, I'd avoid that approach.
The other approach involves displaying the images in your Word document so that you see them as intended, then screen capture so you grab the combined image. Then save that combined image and use it instead of the separate images in RoboHelp. This is the approach I'd suggest and that I use myself.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

After moving and resizing control, some controls don't redraw properly as the cursor passes over them.

I have a top-level VI with three panes (two splitters). One of the panes contains nested tab controls. One of the tab pages contains six XY-graphs, a table and some decorations.
I use a subVI to resize and relocate the tabs and contained controls. All this is working fine, and everything looks fine after the resizing is complete.
The problem is when the cursor passes over certain controls (the chart legends and the table column headers for example), they redraw with gray boxes. The problem only occurs after enlarging the window from its minimum size. It goes away if the window is resized back down to minimum.
Anything that causes the window to redraw, like another resize or minimize/restore, properly refreshes the screen.
Has anyone seen this problem, and have a workaround?
The problem exists in development environment or built in LV 9.01 or LV 2010.
Thanks!
Matt Dennie
Attachments:
Resize Redraw Problem.zip ‏125 KB
Resize Redraw Problem.JPG ‏210 KB

Thanks again for taking a look at my problem.
force redraw - This is apparently only available in LV2010. I did give at a try, but it did not prevent the problem, nor did it correct the problem once the gray boxes appeared.
disable updates (on a graph) - This apparently only applies to 3-D graphs, which is not what I am using in this case.
disable front panel updates - I tried disabling updates before moving/resizing the front panel controls, then re-enabling updates afterwards. The problem is exactly the same as before. Once the move/resize is complete, passing the mouse over the table column headers or the graph plot legend results in the gray boxes.
I would appreciate any other suggestions you may have.
Again... the problem is not that the moving and resizing don't work. They work fine. But once the resizing is complete, passing the mouse over the legend or table column headers causes gray boxes to appear.
Thanks!
-- Matt

Why the cursor changes only after moving the mouse?

Similar Messages

Maybe you are looking for