Why the devices in KSA does not have facetime ???

I Bought an ipad air and iphone6  but they both does not have facetime,, i live in KSA,, could it be blocked here ?

Correct. An iOS device originating from Saudi Arabia or the United Arab Emirates will never have FaceTime.
(122508)

Similar Messages

  • Facetime not working "the device to register does not have the correct access data"

    I can't use my facetime on my macbook anymore. I used it already a lot of times, but now I have to log in with my Apple ID (and password) before I can use it. After this it asks which emailadress I want to use to make and get calls. After choosing this, it states that "the device to register does not have the correct access data". I can also not change anything at the preferences of facetime, as it has become unclickable (probably because I am not logged in). What to do now?

    Create another standard user on your MB. I bet facetime will work from there. Unless you have replaced a motherboard and Apple forgot to flash your old serial number into it. Check serial number in About this mac. If it's not there it is your likely problem.
    There might be other problems. Have you tried checking with Apple?

  • TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

    My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • My iphone does not have facetime on it.  I've tried going into restrictions, but there's a passcode that doesn't seem to be one that I've used before.  Is it possible to reset the phone and then just restore a portion of the old information?

    My iPhone does not have Facetime on it.  I've tried going into restrictions, but there's a passcode that doesn't seem to be one that I've used before.  Is it possible to reset the phone and then just restore a portion of the old information?  I've tried several pass codes and now am locked out for an hour after being locked out for 5 minutes and then 15 minutes.  It said that I had tried 7 pass codes prior to these, but I don't remember ever trying to get into restrictions before.
    I've looked up other posts on this, and my phone was purchased in the US and does not have an AE in the model number.

    Help for forgotten passcode >   iOS: Forgotten passcode or device disabled after entering wrong passcode
    When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
    Try a search >  iOS: Understanding Spotlight Search

  • The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating!

    The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating! Where can I find these two movies to watch? It asked me once it was downloaded if I wanted to watch it but I wasn't ready to and now can't find where to play these again.

    When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised  filesytem structure at the start of the Sync.
    The timeout failure could be due to
    Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
    Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
    Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
    Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
    Have a nice day!

  • My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.  I uninstalled the program and reinstalled again but nothi

    my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.
    I uninstalled the program and reinstalled again but nothing gone better-
    What should I do?
    Best regards

    Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

  • HT1976 why is my iphone 4 does not have cellular data network only cellular data

    why is my iphone 4 does not have a cellular data network and apn only cellular data without apn settings,thanks

    # Settings > Refresh apps on background. I would suggest to completely turn that off
    # Settings > Privacy > Location tracking > Only Maps, Google Maps are allowed to use location tracking in my case, you could also turn that off completely or be very selective which apps can use your GPS.
    # Settings > E-mail, calendar .. >deselect 'Push' and set it to either Fetch e.g. once an hour for all separate e-mail accounts you have. In your case you could set it to Manual so you won't use any data as long as you won't open your E-mail app and manually download e-mails.
    It could also be that there is still an app running in the background as i had. See also this post.
    In that case you need to dive into the Settings > General > Info > Diagnostics and Use >
    Diagnostics and Use >logs per app to determine which app isn't closed although you turned off your phone (or even in my case reset to factory settings  without backup). It's unfortunately pretty hard to find the app that is causing this. Therefore i wish Apple would come up with a better solution for this to see which processes/app(s) should be killed (now the best solution is removing the app completely).

  • Why is my iphone 4 does not have cellular data network

    Why is my iphone 4 does not have a cellular data network only cellular data

    Hi beingkejo,
    Thanks for visiting Apple Support Communities.
    Toggling Airplane mode and cellular data are good troubleshooting steps. If your iPhone still does not connect to cellular data automatically when Wi-Fi disconnects, I recommend the additional steps in this article:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    All the best,
    Jeremy

  • "The Loged On user does not have permission to use this object" error

    Hi
    I've created a form that is used by a customer which allows for certain draft documents to be approved and then once approved they are created. The problem that I am having is that when the users attempt to update the changes on the form an error is logged, which is shown below:
    "Error: -3000
    The Loged On user does not have permission to use this object
    System.Runtime.InteropServices.COMException (0xFFFFF448): The Loged On user does not have permission to use this object"
    Once the update button is pressed then a User Defined Table and Drafts are both updated with the relevant modified UDFs from the form.
    If I log onto their system then I don't seem to get any issues. To me it looks like a user authorisation problem but the ones who have used the form seem to have the relevant licences.
    Do you have any idea why this error could be occuring?
    Thanks a lot.
    Steve

    Hi,
    Go to Administration --> System Initlization > Authorizations> General Authorizations not expand all and check if the service call is given full *Read & Write * rights to the required user.
    If not then give full rights and check the add on.
    Hope it helps,
    Vasu Natari.

  • HT4623 I have recently moved from the UAE to UK my ipad bought in UAE does not have facetime feature ... apparently blocked by UAE agreement with APPLE? Now I am in Uk is there anyway to register through APPLE STORE my ipad and get a software update to in

    I had purchased my ipad air in UAE and have now moved to UK. The software version sold in UAE does not have facetime on it. Now I am based in UK and would like to use facebook to keep in touch with friends in Uk and USA is there anyway of registering my ipad with UK APPLE to ensure I get a software update that allows me access to facetime?

    Sorry. No. Part of the agreement was that devices sold in the UAE are never allowed to have facetime (probably to prevent just what you're trying to do.)
    If facetime is a make it or break it, you might sell yours and buy another one, or find some other service to use. Maybe skype would work for you?

  • The loged on user does not have permission to use this object'

    A professional license user currently has Authorisation to all Customer BPs and Sales Documents.
    When creating a random Sales Order, the error message
    'Create POs(): The loged on user does not have permission to use this object'
    is occuring.  This is not occuring for all Sales Orders, this is occuring randomly.
    Note that the Purchase Orders Button in the Logsitics tab in the sales order is NOT selected.
    Cheers Lisa

    hi lisa
    there could be some changes in transaction notification from your side if there are any i would request you to please comment all the changes and then try saving the document it would definately go ahead as there has to be some change in the stored procedure ,
    Regards,
    Manish

  • 'The logged-on user does not have permission to use this object'

    Hello everyone,
    I am getting the message 'The logged-on user does not have permission to use this object' while saving the Sales Order. I am logging in as a CRM user. There is an addon also running on the server, that saves some data into a user defined table when the Sales Order is saved. Is there any authoisation for users to access user defined tables.
    Regards,
    William

    hi William,
    this is an Authorization issue. provide the user with authorization on your UDT. Definition of user authorization can be found in Administration -- >> System Initialization -->> Authorizations -->> Additional Authorization Creator.... if already defined from here you can fined the additional authorization from the General authorization window.
    regards,
    Fidel

  • The IC WebClient profile does not have a component 'ERP Sales Order'

    Hi CRM Experts,
    While creating the ERP Sales Order in web-IC
    we have bumped into following error:
    "The IC WebClient profile does not have a component 'ERP Sales Order'".
    And also we are not able to see sales area data and Plant data in the drop down lists.
    we have done the following settings:
    1) ERP Sales Order Profile:we have defined ERP Sales Order profile,maintained RFC destinatin and assigned document type to ERP Profile.
    2) Business Transaction Launcher: We have defined the Business Transaction Profile and assigned dependent business transaction.
    3) We have assigned the Business Transaction Profile to the Navigation Bar Profile.
    Please suggest me regarding above error also let us know did we miss any configuration?
    Waiting for your valuable inputs.
    Regards,
    Sree.

    Hi Sree,
    There is a setting needed for the IC webclient
    ERP_SALES_ORDER
    you need to define ERP sales order profile and assign it to your ic webclient profile.
    And the ERP sales order scenario can only be used with a ERP 6.0 backend system, at least.
    Hongyan

  • Error Message' "The loged on user does not have permission to use this obje

    The loged on user does not have permission to use this object-
    I am entering a Sales order, which is customized, when I add the Sales order this system imformation appears.
    The user has a pro-license and authorizations to all AR
    Can someone tell me what my problem might be?

    Thank you for your help

  • The selected context node does not have attributes - Message no. SWDP_WB_TO

    Hello,
    I am trying out the example in web dynpro documentation -> Creating a Simple Flight Info Application
    and in part 3 steps 11 - 13 I get the following error
    The selected context node does not have attributes
    and the associated message class and # is :
    Message no. SWDP_WB_TOOL467
    can anyone please help ?

    Hi Raj,
    Have you done the steps 7 and 8 as described
    7.      Create an additional node called u201CflightSu201D, this time with the cardinality 0..n.
    8.      Use the Create Using Wizard option of the context node again to define attributes from the SFLIGHT structure for this new node (see part 1, step 15). Choose the following fields: CARRID, CONNID, FLDATE, PRICE and PLANETYPE.
    See the flights node , if there are no attributes the perform the steps as described in 8.

Maybe you are looking for

  • What can i do about my pixel error?

    Hi, Some days ago (I think a week ago) my ipod touch 4G fell on the groud, or probably it was something i did, similar to that, and on the top bar of the screen, where the clock and the baterry are, appeared some gray dots (i think they are pixels th

  • Error on custom module in Receiver File Adaptor

    You have to add audit log to your code so that you will know after what step it failed. That was the only way the I could come up with while I was working with modules. VJ

  • Append front panel image to report

    I am using Labview V6.1 on a Win2000 PC 2.4 Ghz, 512MB RAM. I am trying to use the append front panel image to report VI to append a VI panel image to a report. I am using notifiers to synch the execution of the VI with the desired front panel an the

  • Convert audio from mono to stereo

    I have imported video and audio from a camera with microphone, and the audio is only playing out of the left speaker. This is despite the fact that both A1 and A2 channels in the timeline appear to have audio. I'm new to this, and any help to get the

  • Item information of FB60 parked document

    Hi , When a FB60 document is parked the only table updated in BKPF. BSEG doesnot get updated with lineitem information. How I read line item information of parked FB60 document? Thanks, Krishna.