Why the set operation failed in ".TMIB" tpcall

I want to change the state of client. So I write the follow lines to complete it,
but it failed, the error code is:tperrno=11,tperrtext=TPESVCFAIL - application
level service failure. Please help me how can I change the state of client.
Fchg32(SndBuf, TA_OPERATION, 0, "SET", 0);
Fchg32(SndBuf, TA_CLASS, 0, "T_CLIENT", 0);
Fchg32(SndBuf, TA_STATE, 0, "DEAd", 0);
for (i=0; i<l; i++)
memset(clientid, 0, sizeof(clientid));
memset(state,0,sizeof(state));
p = Ffind32(in,TA_CLIENTID,i,NULL);
Fchg32(SndBuf, TA_CLIENTID, 0, p, 0);
ret = tpcall(".TMIB", (char *)SndBuf, 0, (char **)&RcvBuf,
&rcvlen, (long)0);

sorry, please check:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=tuxedo.general&item=4581&utag=
Thanks.
"fly231" <[email protected]> wrote:
>
I want to change the state of client. So I write the follow lines to
complete it,
but it failed, the error code is:tperrno=11,tperrtext=TPESVCFAIL - application
level service failure. Please help me how can I change the state of client.
Fchg32(SndBuf, TA_OPERATION, 0, "SET", 0);
Fchg32(SndBuf, TA_CLASS, 0, "T_CLIENT", 0);
Fchg32(SndBuf, TA_STATE, 0, "DEAd", 0);
for (i=0; i<l; i++)
memset(clientid, 0, sizeof(clientid));
memset(state,0,sizeof(state));
p = Ffind32(in,TA_CLIENTID,i,NULL);
Fchg32(SndBuf, TA_CLIENTID, 0, p, 0);
ret = tpcall(".TMIB", (char *)SndBuf, 0, (char **)&RcvBuf,
&rcvlen, (long)0);

Similar Messages

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

Moving big files(600MB) with FTP Adapter error The IO operation failed

I everybody, I have the next trouble:
I need to move big files from one server to another remote server through ftp protocol. All the configuration is correct and I am able to move little files
with no problem, but when I move big files the server shows the next error:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'readEBS'
failed due to: The IO operation failed. The IO operation failed. The "OPER[NOOP][NONE]" IO operation for "/tmp/TestLogSOA/DetalleCostos3333333.dvd"
failed. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_NOTA start() failed on
resource 'SOADataSource_ohsdomain': XAER_NOTA : The XID is not valid oracle.jdbc.xa.OracleXAException at
oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1532) at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:321) at
weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:51) at weblogic.jdbc.jta.DataSource.start(DataSource.java:722) at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1228) at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161) at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:297) at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507) at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434) at
weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1592) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1496) at
weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396) at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355) at
oracle.integration.platform.xml.XMLDocumentManagerImpl.getConnection(XMLDocumentManagerImpl.java:623) at
oracle.integration.platform.xml.XMLDocumentManagerImpl.insertDocument(XMLDocumentManagerImpl.java:208) at
sun.reflect.GeneratedMethodAccessor1534.invoke(Unknown Source) at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at
org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at
org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at
org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at
org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy285.insertDocument(Unknown Source) at
oracle.integration.platform.instance.store.MessageStore.savePayload(MessageStore.java:244) at
oracle.integration.platform.instance.store.MessageStore.savePayloads(MessageStore.java:99) at
oracle.integration.platform.instance.InstanceManagerImpl.persistPayloads(InstanceManagerImpl.java:773) at
oracle.integration.platform.instance.InstanceManagerImpl.persistReferenceInstanceBean(InstanceManagerImpl.java:1106) at
oracle.integration.platform.blocks.adapter.AbstractAdapterBindingComponent.createAndPersistBindingInstance(AbstractAdapterBindingComponent.java:502)
at oracle.integration.platform.blocks.adapter.AdapterReference.createAndPersistBindingInstance(AdapterReference.java:356) at
oracle.integration.platform.blocks.adapter.AdapterReference.request(AdapterReference.java:171) at
oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139) at
oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179) at
Thanks!!!

Hi idavistro,
You can try setting the XA Transaction Timeout for SOADataSource.
1. Log in to the WebLogic Admin Console.
2. Select in the left tree: Services-> Datasources-> SOADataSource->Transaction.
2. Select Set XA Transaction Timeout.
3. Set XA Transaction Timeout to 0.
4. Restart the server and check if the error still appears.
Regards,
Neeraj Sehgal

The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?

Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

The export operation failed to create an image file

I've been experiencing bizarre behavior when attempting to export images to my Usb-connected card reader. After reading some threads on this form, I was convinced that my reader was defective. Same problem on a brand-new reader.
The specific behavior was as follows: I attempted to export roughly 150 custom-named 500 KB image files to the memory card. The last 15 or so failed to transfer and I got the message, "the export operation failed to create an image file for the versions identified below."
Trashing VP list didn't help. What did was changing the custom name. There was nothing particularly unusual about the original custom name and the new one was virtually identical. After changing the name, the export worked without a hitch.
Has anyone experienced similar behavior? Any ideas what's going on?

problem was that the NEW card reader was faulty as well. My luck!

Memeber server in a domain connected with external trust. The agent operation failed, DPM could not communicate with the DPM agent. Error ID 270

I manually installed the agent on a member server in a domain (domainB) that has an external trust with the domain the DPM 2010 server, mydpmserver.domainA.int, is in.
I pointed the agent on myprotectedserver with setdpmserver -dpmservername mydpmserver.domainA.int
I successfully ran attach-productionserver.ps1 in DPM Management Shell.
When I click refresh in DPM 2010 Administrator Console/Management/Agents I get error id: 270
The agent operation failed on myprotectedserver.domainB.int because DPM could not communicate with the DPM protection agent. The computer may be protected by another DPM server, or the protection agent may have been uninstalled on the protected computer.
If myprotectedserver.domainB.int is a workgroup server, the password for the DPM user account could have been changed or may have expired.
I can ping myprotectedserver.domainB.int from mydpmserver.domainA.int
DPM 2010 backup of the domain_controller.domainB.int works fine.
The application log on myprotectedserver.domainB.int does not show any DPMRA related event logged.
The firewall on myprotectedserver is off.
Computers in domainA and domainB use their own networks connected through a router.
from mydpmserver
net view \\myprotectedserver.domainB.int /all - successfull
sc \\myprotectedserver.domainB.int query OpenSCManager FAILED 5, Access is denied
wmic /node:myprotectedserver.domainB.int OS list brief Error 0x80070005, Access is denied
from domaincontroller.domainB.int:
sc \\myprotectedserver.domainB.int query successfull
wmic /node:myprotectedserver.domainB.int OS list successfull
Any suggestions on how can I fix this?

Hi
I know this is old but are you still having a problem?

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

The attempted operation failed. An object could not be found. Outlook 2010 error

I am unable to search other mailbox in Outlook 2010, getting the following error: The attempted operation failed. An object could not be found. I removed both instances of
KB2956128
installed
on 2/11/2015. It worked for a while and issue returned againa. Any suggestions?

Hi,
Thank you for your reporting. We have noticed this, and would like to collect more information for further investigation.
Can you guys share your detailed system info? Also, if you have any log files about the issue, kindly share with us by sending them to this email account:
[email protected] (please use the link of this thread as the subject).
We appreciate your assistance with this.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HELP! FLASH CS6 "The export operation failed because it ran out of memory"

Hey guys, really need your help on this one. I can't seem to export my flash animation video. It kept failing and prompting that "The export operation failed because it ran out of memory"
Anyone knows a solution to this. It will be very much appreciated.
Thank you very much.

Hi,
It totally depends on what's the content you are trying to export. The reason is as simple as it says. The content might be really huge that it ran out of memory. Any info you can provide on the kind of stuff you have in the file?
- Hemanth

Flash CS6, QuickTime: The export operation failed because it ran out of memory.

Exporting a QuickTime movie file seems to be an old issue with previous versions too. In CS6 I always get the error message: "The export operation failed because it ran out of memory." I've got tons of memory and have allocated increasing amounts to the cache with no success.
My small and fairly simple file was created with Flash CS5 which seemed to work fine at the time of creation. I've tried everything recommended online but with no luck so far. BTW, I reinstalled CS5 and tried that too but it just hangs now, and there's no error message.
Does anyone have a solution?
(OS X 10.7.4)

If I may join this discussion... I loaded up CS6 two days ago and have just completed my first 60 second animation using it. Like everybody else here, it all went fine until I tried to export it to QuickTime – something that has never been problematic before.
I ended up exporting it as a swf and opening that in CS4. Then I could export it, but the resulting QuickTime movie was over 500 MB in size! Okay, so then I opened it in QuickTime Pro and exported it from there. This brought the file size down to a far more reasonable 35 MB, but now the soundtrack has gone! So now I am having to replace the sound in Final Cut Pro.
This is a real palaver – and not conducive to heaping praise on CS6 when questioned. I note that there is talk of Adobe rectifying this "bug", but it would be really good to hear from somebody at Adobe with:
a) An apology
b) An estimated time of delivery
c) A best practice work round
But I'm guessing that anybody that works at Adobe will be the last person to read this...

HT1386 why the sync session failed to start with my iphone

Why the sync session failed to start with my iphone

i did this step. but still it says syncing failed... am having iphone 5 updated to 6.1.4 & itunes is updated to 11.0.4.. pls help!!

How to get why the validation has failed.when using isSchemaValid() ?

Oracle 11.2
to validate xmlType I use a procedure within isSchemaValid - function,
But when it returns 0,
where from to get why the validation is failed ?
regards

Thats the reason why you should use SchemaValidate(), because its more informative
See for an example here: Re: catching error while validating an xml file

Why the 'LIKE' operator takes so much time to run?

I have a table T with 3 columns and 3 indexes:
CREATE TABLE T
id VARCHAR2(38) NOT NULL,
fid VARCHAR2(38) NOT NULL,
val NVARCHAR2(2000) NOT NULL
ALTER TABLE T ADD (CONSTRAINT pk_t PRIMARY KEY (id,fid));
CREATE INDEX t_fid ON T(fid);
CREATE INDEX t_val ON T(val);
Then I have the following two queries which differ in only one place - the 1st one uses the '=' operator whereas the 2nd uses 'LIKE'. Both queries have the identical execution plan and return one identical row. However, the 1st query takes almost 0 second to execute, and the 2nd one takes more than 12 seconds, on a pretty beefy machine. I had played with the target text, like placing '%' here and/or there, and observed the similar timing every time.
So I am wondering what I should change to make the 'LIKE' operator run as fast as the '=' operator. I know CONTEXT/CATALOG index is a viable approach, but I am just trying to find out if there is a simpler alternative, such as a better use of the index t_val.
1) Query with '=' operator
SELECT id
FROM T
WHERE fid = '{999AE6E4-1ED9-459B-9BB0-45C913668C8C}'
AND val = '3504038055275883124';
2) Query with 'LIKE' operator
SELECT id
FROM T
WHERE fid = '{999AE6E4-1ED9-459B-9BB0-45C913668C8C}'
AND val LIKE '3504038055275883124';
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=1 Card=1 Bytes=99)
1 0 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=1 Card=1 Bytes=99)
2 1 INDEX (RANGE SCAN) OF 'T_VAL' (NON-UNIQUE) (Cost=4 Card=12)

I will for sure try to change the order of the PK and see whether there will be any impact to the performance.
In our application, val is much closer to a unique value than fid. In the example query, the execution plan showed that the index on val was indeed used in the execution of the query. That's why the 1st query took almost no time to return (our table T has more than 6 million rows).
I was hoping the 'LIKE' operator would utilize the t_val index effectively and provide similar performance to the '=' operator. But apparently that's not the case, or needs some tricks.

"The export operation failed because it ran out of memory"

I'm trying to export from Flash CS5 to an mov.
Project is in custom size (874 x 480) but when saved to SWF it's not really
that big (15mb). So I'm a little confused.
Anyone encountered this error message?
This is quite new to me.
I've got 2 HD on my mac with each having at least 2Tb available each,
so don't think its that.
Memory is 8GB and I got nothing running except the Flash CS5.
Need some help my friends. Client

Not sure if your problem has been solved. Flash is flat broken on this. I am using CS6, same problem, same headache. Adobe should be ashamed for not fixing this issue. Someone even suggest to use third party screen capture tool like Camtasia? Why don't you just remove the Export from your Flash menu all together if anything beyong 30 seconds of video export would fail?
In the meantime, Try download Swivel from cnet. The app will happily convert your SWF to anyformat you like. Both Mac and Windows version are available. This was one of the best life saver I ever downloaded from cnet.
HTH

Does anyone know why the Setting NAME & DESCRIPTION fields are grayed out?

Hi,
I'm using Compressor 3.0.5 and it works fine, except that I cannot reach the Settings "Name" or "Description" fields to alter them. As I'm going about finding the perfect setting for whatever application I need, I'd like to change the name and description to match. I can "save as..." and rename it, but I cannot change the one-line description that sits under the name in the list.
What am I doing wrong? The manual says I should be able to do this and I always had been able to in previous versions.

Those changes can only be made when the preset is in the Settings window.
So, drag a setting to a target in the Batch window, tweak it until you're satisfied,
then do a Save As. Now select the Preset you just saved +from the Settings window.+
Doing so makes the name and description fields editable.

Why the set operation failed in ".TMIB" tpcall

Similar Messages

Maybe you are looking for